Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MC-Injekt 2300 top - Komponente A
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Polyurethaanhars, Injektionsstoffe
Uses advised against
Geen verdere relevante informatie verkrijgbaar.
Manufacturers & Suppliers
MC-BAUCHEMIE Müller
manufacturer
Am Kruppwald 2-8, D-46238 Bottrop
+49(0)2041 101-0
MC-Bauchemie N.V.
manufacturer
Intercity Business Park, Gen. De Wittelaan 17 A, B-2800 Mechelen
+32 (0)15 20 14 62
Emergency Contacts
Nationaal Vergiftigingen Informatie Centrum (NVIC)
+31 30 - 2748888
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
harsmengsel. Mengsel van na elkaar aangevoerde stoffen met ongevaarlijke bijmengingen.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Polypropylenglykol | 25322-69-4 | 25 - 50% | Yes |
| ethaan-1,2-diol EC: 203-473-3 | 107-21-1 | 0.1 - 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Voor verse lucht zorgen.
Ogen bij geopend ooglid een aantal minuten met stromend water spoelen
Mond spoelen en overvloedig water drinken. Deskundige medische behandeling inschakelen.
Immediate Medical Attention
Deskundige medische behandeling inschakelen.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Brandblusmaatregelen op omgeving afstemmen.
Geen verdere relevante informatie verkrijgbaar.
Firefighter Protection
Geen bijzondere maatregelen nodig.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Niet nodig.
Geen speciale maatregelen noodzakelijk.
Met vloeistofbindend materiaal opnemen.
Materials: zand, bergmeel, zuurbinder, universele binder, zaagmeel
Related Products
Similar products with comparable safety profiles
MC-Injekt 2300 top - Komponente B
---
MC-Injekt 1264 compact - Komponente A
---
MC-Injekt 1264 compact - Komponente B
---
MC-Injekt GL-95 - Komponente A 3
---
MC-Injekt GL-95 - Komponente A 2
CAS: 2867-47-2
MC-Injekt GL-95 - Komponente B
---
MC-Injekt GL-95 - Komponente A 1
---
MC-Injekt GL-95 TX - Komponente B 1
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Geen bijzondere maatregelen noodzakelijk.
Geen bijzondere eisen.
Geen bijzondere maatregelen noodzakelijk.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Geen aanvullende gegevens. Zie 7.
Niet noodzakelijk. Handschoenmateriaal: n.n. Doordringingstijd van het handschoenmateriaal: -
Montuurbril met zijbescherming dragen DIN-/ EN-normen: DIN EN 166.
Niet noodzakelijk.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Geen ontleding bij gebruik volgens voorschrift.
Geen verdere relevante informatie verkrijgbaar.
Geen verder relevante informatie verkrijgbaar.
Geen verdere relevante informatie verkrijgbaar.
Geen verdere relevante informatie verkrijgbaar.
Geen gevaarlijke ontbindingsproducten bekend.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MC-Injekt 2300 top - Komponente A?
The signal word is no signal word.
What is the physical form of MC-Injekt 2300 top - Komponente A?
MC-Injekt 2300 top - Komponente A is a vloeibaar with geel color. It has karakteristiek odor.
What is MC-Injekt 2300 top - Komponente A used for?
Polyurethaanhars, Injektionsstoffe
What is the melting point of MC-Injekt 2300 top - Komponente A?
The melting point is niet bepaald and the boiling point is niet bepaald.