Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Ijzer-(III)-chloride hexahydraat
- Product Code
- 44944
- Chemical Name
- Ijzer-(III)-chloride hexahydraat
Regulatory Identifiers
- CAS Number
- 10025-77-1 Check regulations →
- REACH No.
- 01-2119497998-05-XXXX
Identified Uses
Laboratoriumchemikaliën, Vervaardiging van stoffen
Manufacturers & Suppliers
SIGALD
distributor
Merck Life Science BV/SRL
distributor
Brusselsesteenweg 288, B-3090 OVERIJSE
+32 (0)3 899-1301
Emergency Contacts
CHEMTREC
+(32) 28 083237
Anti-poison centre
070 245245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Iron trichloride hexahydrate EC: 231-729-4 | 10025-77-1 | 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Na inhalatie: frisse lucht.
Bij aanraking met de huid: Verontreinigde kleding onmiddellijk uittrekken. Huid met water afspoelen/ afdouchen.
Na oog contact: uitspoelen met ruim voldoende water. Onmiddellijk een oogarts raadplegen. Contactlenzen uitnemen.
Na inslikken: slachtoffer onmiddellijk water laten drinken (niet meer dan twee glazen). Een arts raadplegen.
Immediate Medical Attention
Onmiddellijk een oogarts raadplegen. Een arts raadplegen.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Gebruik blusmiddelen die geschikt zijn voor de plaatselijke omstandigheden en de omgeving.
Voor deze stof / dit mengsel gelden geen beperkingen voor blusmiddelen.
Chloorwaterstofgas, ijzeroxiden, Niet brandbaar. Door brand in de omgeving is het ontstaan van gevaarlijke dampen mogelijk.
Firefighter Protection
Blijf niet in de gevarenzone zonder beademingsapparatuur die onafhankelijk is van de omgevingslucht. Om huidcontact te vermijden, houd een veilige afstand en draag geschikte beschermende kleding.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Gevarenzone ontruimen, noodprocedures volgen, een deskundige raadplegen.
Gemorst materiaal verzamelen, binden en afpompen. Droog opnemen.
Related Products
Similar products with comparable safety profiles
IJzer(III) chloride-hexahydraat
CAS: 10025-77-1
IJzer (III) chloride
UFI: 7P9C-J2C5-7X0Q-DFQN
Chroom(III)-chloride hexahydraat
CAS: 10060-12-5
IJzer(III)chloride-hexahydraat ≥98%, zeer zuiver
CAS: 10025-77-1
Ijzer(III)chloride, oplossing (40%)
---
Ijzer(III)chloride, oplossing (40%)
---
Ijzer(III)chloride, oplossing (40%)
---
IJzer (II) chloride-tetrahydraat ≥99 %, zuiver
CAS: 13478-10-9
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Zie hoofdstuk 2.2
Bewaren onder inert gas. Goed afgesloten. Droog. hygroscopisch
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Volledig contact: Materiaal: Nitrilrubber, Minimale laagdikte: 0,11 mm, Doorbraaktijd: 480 min, Getest materiaal: KCL 741 Dermatril® L. Spat contact: Materiaal: Nitrilrubber, Minimale laagdikte: 0,11 mm, Doorbraaktijd: 480 min, Getest materiaal: KCL 741 Dermatril® L. Deze aanbeveling heeft alleen betrekking op het in het veiligheidsinformatieblad genoemde product, voor de door ons aangegeven toepassingen. Wanneer het middel wordt opgelost in, of vermengd met andere substanties, onder andere condities dan vermeld in EN374 neemt u dan svp contact op met de leverancier van de CE-goedgekeurde handschoenen (b.v. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).
Gebruik gezichts- en/of oogbescherming getest en goedgekeurd door officiële instellingen zoals NIOSH (US) of EN166 (EU). Nauw aansluitende veiligheidsstofbril
Aanbevolen filtertype: Filter B-(P2). De ondernemer moet er voor zorgen dat onderhoud, reiniging en beproeving van adembeschermingstoestellen worden uitgevoerd volgens de voorschriften van de leverancier. Deze maatregelen moeten uitvoerig zijn gedocumenteerd.
beschermende kleding
Product niet in de riolering laten komen.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Het product is chemisch stabiel onder standaard omgevingsvoorwaarden (ka mertemperatuur).
Geen gegevens beschikbaar
Gevaar voor ontploffing met: Alkalimetalen, Ethylenoxide
Blootstelling aan vocht.
VloeistaalMetalen
In geval van brand: zie hoofdstuk 5
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3260
- Shipping Name
- BIJTENDE ZURE ANORGANISCHE VASTE STOF, N.E.G. (Iron trichloride hexahydrate)
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Ijzer-(III)-chloride hexahydraat?
The signal word is danger.
What is the physical form of Ijzer-(III)-chloride hexahydraat?
Ijzer-(III)-chloride hexahydraat is a vast . It has geen gegevens beschikbaar odor.
What is Ijzer-(III)-chloride hexahydraat used for?
Laboratoriumchemikaliën, Vervaardiging van stoffen
What are the hazard statements for Ijzer-(III)-chloride hexahydraat?
This substance has 4 hazard statements:
- H290: Kan bijtend zijn voor metalen.
- H302: Schadelijk bij inslikken.
- H315: Veroorzaakt huidirritatie.
- H318: Veroorzaakt ernstig oogletsel.
What is the melting point of Ijzer-(III)-chloride hexahydraat?
The melting point is 37 °C and the boiling point is 280 - 285 °C.