Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- IJzer(II)-chloride tetrahydraat
- Product Code
- 44939
- Chemical Name
- IJzer(II)-chloride tetrahydraat
Regulatory Identifiers
- CAS Number
- 13478-10-9 Check regulations →
- REACH No.
- 01-2119498060-41-XXXX
Identified Uses
Laboratoriumchemikaliën, Vervaardiging van stoffen
Manufacturers & Suppliers
SIGALD
Merck Life Science BV
distributor
Ildefonse Vandammestraat 5/7B, B-1560 HOEILAART
+32 (0)3 899-1301
Emergency Contacts
CHEMTREC
+(32) 28 083237
Anti-poison centre
070 245245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ferrous chloride tetrahydrate EC: 231-843-4 | 13478-10-9 | 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Na inhalatie: frisse lucht.
Bij aanraking met de huid: Verontreinigde kleding onmiddellijk uittrekken. Huid met water afspoelen/ afdouchen.
Na oog contact: uitspoelen met ruim voldoende water. Onmiddellijk een oogarts raadplegen. Contactlenzen uitnemen.
Na inslikken: slachtoffer onmiddellijk water laten drinken (niet meer dan twee glazen). Een arts raadplegen.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Gebruik blusmiddelen die geschikt zijn voor de plaatselijke omstandigheden en de omgeving.
Voor deze stof / dit mengsel gelden geen beperkingen voor blusmiddelen.
Chloorwaterstofgas, ijzeroxiden. Door brand in de omgeving is het ontstaan van gevaarlijke dampen mogelijk.
Gassen/dampen/nevels neerslaan met behulp van een watersproeistraal.
Firefighter Protection
Draag bij brand een autonoom ademhalingsapparaat.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Vermijd stofinhalatie. Vermijd contact met de stof. Zorg voor voldoende ventilatie. Gevarenzone ontruimen, noodprocedures volgen, een deskundige raadplegen.
Product niet in de riolering laten komen.
Droog opnemen. Vervuild oppervlak schoonmaken.
Related Products
Similar products with comparable safety profiles
Ijzer-(III)-chloride hexahydraat
CAS: 10025-77-1
Ijzer-(III)-chloride hexahydraat
CAS: 10025-77-1
Ijzer-(III)-chloride hexahydraat
CAS: 10025-77-1
IJzer(III)-chloride
CAS: 7705-08-0
IJzer(III)-chloride
CAS: 7705-08-0
IJzer (III) chloride
UFI: 7P9C-J2C5-7X0Q-DFQN
IJzer (II) chloride-tetrahydraat ≥99 %, zuiver
CAS: 13478-10-9
IJzer(III)chloride-hexahydraat ≥98%, zeer zuiver
CAS: 10025-77-1
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Voor voorzorgsmaatregelen zie hoofdstuk 2.2
Goed afgesloten. Droog. Hygroscopisch. Bewaren onder inert gas. Luchtgevoelig.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Volledig contact: Materiaal: Nitrilrubber, Minimale laagdikte: 0,11 mm, Doorbraaktijd: 480 min, Getest materiaal: KCL 741 Dermatril® L. Spad contact: Materiaal: Nitrilrubber, Minimale laagdikte: 0,11 mm, Doorbraaktijd: 480 min, Getest materiaal: KCL 741 Dermatril® L.
Gebruik gezichts- en/of oogbescherming getest en goedgekeurd door officiële instellingen zoals NIOSH (US) of EN166 (EU). Nauw aansluitende veiligheidsstofbril
Aanbevolen filtertype: Filter B-(P2). De ondernemer moet er voor zorgen dat onderhoud, reiniging en beproeving van adembeschermingstoestellen worden uitgevoerd volgens de voorschriften van de leverancier. Deze maatregelen moeten uitvoerig zijn gedocumenteerd.
beschermende kleding
Product niet in de riolering laten komen.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Het product is chemisch stabiel onder standaard omgevingsvoorwaarden (kamertemperatuur).
Geen gegevens beschikbaar
Heftige reacties mogelijk met: Alkalimetalen
Blootstelling aan vocht.
Metalen
In geval van brand: zie hoofdstuk 5
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for IJzer(II)-chloride tetrahydraat?
The signal word is danger.
What is the physical form of IJzer(II)-chloride tetrahydraat?
IJzer(II)-chloride tetrahydraat is a fijne kristallen en fragmenten with lichtgroen color. It has geen gegevens beschikbaar odor.
What is the solubility of IJzer(II)-chloride tetrahydraat?
Aceton bij 20 °C - oplosbaar Alcohol bij 20 °C - oplosbaar Benzeen bij 20 °C - weinig oplosbaar Diethylether bij 20 °C - bijna onoplosbaar
What is IJzer(II)-chloride tetrahydraat used for?
Laboratoriumchemikaliën, Vervaardiging van stoffen
What are the hazard statements for IJzer(II)-chloride tetrahydraat?
This substance has 2 hazard statements:
- H302: Schadelijk bij inslikken.
- H318: Veroorzaakt ernstig oogletsel.
What is the melting point of IJzer(II)-chloride tetrahydraat?
The melting point is Smeltpunt: 105 - 110 °C - Verwijdering van kristalwater and the boiling point is 1.023 °C.