NextSDS Logo
Safety Data Sheet NL

Tris(hydroxymethyl)aminomethane

CAS 77-86-1

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Tris(hydroxymethyl)aminomethane
Product Code
252859
Chemical Name
Tris(hydroxymethyl)aminomethane

Regulatory Identifiers

CAS Number
77-86-1 Check regulations →
REACH No.
01-2119957659-16-XXXX

Identified Uses

Laboratoriumchemikaliën, Vervaardiging van stoffen

Manufacturers & Suppliers

S

Sigma-Aldrich

distributor

M

Merck Life Science BV/SRL

distributor

Brusselsesteenweg 288, B-3090 OVERIJSE

+32 (0)3 899-1301

Emergency Contacts

CHEMTREC

+(32) 28 083237

Anti-poison centre

070 245245

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance

Formule : C₄H₁₁NO₃ Moleculair gewicht : 121,14 g/mol CAS-Nr. : 77-86-1 EG-Nr. : 201-064-4

Chemical Name CAS Number Concentration Hazardous
Sigma-Aldrich- 252859 EC: 201-064-4 77-86-1 --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Na inhalatie: frisse lucht.

Skin contact

Bij aanraking met de huid: Verontreinigde kleding onmiddellijk uittrekken. Huid met water afspoelen/ afdouchen.

Eye contact

Na oog contact: uitspoelen met ruim voldoende water. Contactlenzen uitnemen.

Ingestion

Na inslikken: slachtoffer water laten drinken (niet meer dan twee glazen). Indien onwel: arts raadplegen.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water, Schuim, Kooldioxide (CO₂), Droogpoeder

Unsuitable media

Voor deze stof / dit mengsel gelden geen beperkingen voor blusmiddelen.

Specific hazards

Koolstofoxiden, Stikstofoxiden (NOx), Brandbaar. In geval van brand kunnen er gevaarlijke brandgassen en dampen ontstaan.

Firefighter Protection

Bij brand een persluchtmasker dragen.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Vermijd stofinhalatie. Gevarenzone ontruimen, noodprocedures volgen, een deskundige raadplegen.

Environmental

Product niet in de riolering laten komen.

Cleanup methods

Droog opnemen. Vervuild oppervlak schoonmaken.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Zie hoofdstuk 2.2

Storage

Goed afgesloten. Droog.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Met handschoenen hanteren. Handschoenen voor gebruik goed controleren. Handschoenen netjes uittrekken zonder de buitenkant aan te raken met de blote hand. Gebruikte handschoenen direct weggooien volgens de geldende laboratoriumregels. Was en droog de handen. De gekozen veiligheidshandschoenen moeten voldoen aan de specificaties van de verordening (EU) 2016/425 en de norm En 374, die daarvan is afgeleid. Volledig contact: Materiaal: Nitrilrubber, Minimale laagdikte: 0,11 mm, Doorbraaktijd: 480 min, Getest materiaal: Dermatril® (KCL 740 / Aldrich Z677272, Maat M). Spad contact: Materiaal: Nitrilrubber, Minimale laagdikte: 0,11 mm, Doorbraaktijd: 480 min, Getest materiaal: Dermatril® (KCL 740 / Aldrich Z677272, Maat M). bron data: KCL GmbH, D-36124 Eichenzell, Telefoon +49 (0)6659 87300, e-mail sales@kcl.de, test methode: EN374. Bij gebruik in oplossing, of gemengd met andere bestanddelen, of onder omstandigheden anders dan volgens EN 374, eerst contact opnemen met de leverancier van de volgens de EG-richtlijnen goedgekeurde handschoenen. Deze aanbeveling is enkel een advies en dient ge-evalueerd worden door een arbeidshygiënist of veiligheidsdeskundige die bekend is met de specifieke situatie en gebruik door onze klanten. Het moet niet gezien worden als directe toestemming voor ieder specifiek gebruiksscenario.

Eyes

Gebruik gezichts- en/of oogbescherming getest en goedgekeurd door officiële instellingen zoals NIOSH (US) of EN166 (EU). beschermbril

Respiratory

nodig indien stofvorming plaatsvindt. Onze aanbevelingen voor het filteren van de ademhalingsbescherming zijn gebaseerd op de volgende normen: DIN EN 143, DIN 14387 en andere geldende normen m.b.t. het gebruikte ademhalingsbeschermingssysteem. Aanbevolen filtertype: Filter type P1. De ondernemer moet er voor zorgen dat onderhoud, reiniging en beproeving van adembeschermingstoestellen worden uitgevoerd volgens de voorschriften van de leverancier. Deze maatregelen moeten uitvoerig zijn gedocumenteerd.

Environmental

Product niet in de riolering laten komen.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Cloud Point
---
Form
kristallijn
Colour Intensity
---
Physical State Data
solid
Freezing Point
---
Ph
10,2 - 10,6 bij 6 g/l bij 20 °C
Properties Status
---
Relative Density
1,32 bij 20,4 °C
Relative Evaporation Rate
---
Decomposition Temperature
143 °C
Vapor Density
---
Molecular Weight
---
Kinematic Viscosity
Niet van toepassing
Boiling Point
288 °C
Softening Point
---
Density
---
Solubility In Fat
---
Lower Explosive Limit
---
Odor
licht, kenmerkend
Crystallisation Point
---
Auto Ignition Temperature
---
Voc Content
---
Metal Corrosion
---
Explosive Limits
---
Vapor Pressure
< 0,1 hPa bij 20 °C
Solubility
Ethylacetaat bij 20 °C: weinig oplosbaar; Alcohol bij 20 °C: oplosbaar; Dimethylformamide bij 20 °C: oplosbaar; Aceton bij 20 °C: oplosbaar; Chloroform bij 20 °C: bijna onoplosbaar
Colour
wit
Flammability
---
Upper Explosive Limit
---
Evaporation Rate
---
Odor Threshold
---
Bulk Density
---
Solidification Point
---
Dynamic Viscosity
---
Physical State
solid
Melting Point
169 °C
Flash Point
Niet van toepassing
Appearance
kristallijn, wit
State Under Standard Conditions
---
Partition Coefficient
log Pow: -2,31 bij 20 °C
Solubility In Water
678 g/l bij 20 °C
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Het product is chemisch stabiel onder standaard omgevingsvoorwaarden (ka mertemperatuur).

Reactivity

Voor brandbare, organische stoffen en mengsels geldt in het algemeen: bij opwaaiend stof in een overeenkomstig fijne verdeling moet in het algemeen worden uitgegaan van het risico van een stofexplosie.

Hazardous reactions

Heftige reacties mogelijk met: Oxidanten, Basen. Pas op! Bij aanraking met nitrieten, nitraten, salpererigzuur kunnen mogelijk nitrosaminen (N-nitroseverbindingen) vrijkomen!

Avoid

geen informatie beschikbaar

Incompatible

Geen gegevens beschikbaar

Decomposition

In geval van brand: zie hoofdstuk 5

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Tris(hydroxymethyl)aminomethane?

The signal word is no signal word.

What is the physical form of Tris(hydroxymethyl)aminomethane?

Tris(hydroxymethyl)aminomethane is a solid appearing as kristallijn, wit with wit color. It has licht, kenmerkend odor.

What is the solubility of Tris(hydroxymethyl)aminomethane?

Ethylacetaat bij 20 °C: weinig oplosbaar; Alcohol bij 20 °C: oplosbaar; Dimethylformamide bij 20 °C: oplosbaar; Aceton bij 20 °C: oplosbaar; Chloroform bij 20 °C: bijna onoplosbaar

What is Tris(hydroxymethyl)aminomethane used for?

Laboratoriumchemikaliën, Vervaardiging van stoffen

What is the melting point of Tris(hydroxymethyl)aminomethane?

The melting point is 169 °C and the boiling point is 288 °C.