Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Tris(hydroxymethyl)aminomethane
- Product Code
- 154563
- Chemical Name
- Tris(hydroxymethyl)aminomethane
Regulatory Identifiers
- CAS Number
- 77-86-1 Check regulations →
- REACH No.
- 01-2119957659-16-XXXX
Identified Uses
Laboratoriumchemikaliën, Vervaardiging van stoffen
Manufacturers & Suppliers
Aldrich
Merck Life Science BV
national supplier
Ildefonse Vandammestraat 5/7B, B-1560 HOEILAART
+32 (0)3 899-1301
Emergency Contacts
CHEMTREC
+(32) 28 083237
Anti-poison centre
070 245245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| C_{4}H_{11}NO_{3} EC: 201-064-4 | 77-86-1 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Na inhalatie: frisse lucht.
Bij aanraking met de huid: Verontreinigde kleding onmiddellijk uittrekken. Huid met water afspoelen/ afdouchen.
Na oog contact: uitspoelen met ruim voldoende water. Contactlenzen uitnemen.
Na inslikken: slachtoffer water laten drinken (niet meer dan twee glazen). Indien onwel: arts raadplegen.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water Schuim Kooldioxide (CO$_{2}$) Droogpoeder
Voor deze stof / dit mengsel gelden geen beperkingen voor blusmiddelen.
Brandbaar. In geval van brand kunnen er gevaarlijke brandgassen en dampen ontstaan.
Gassen/dampen/nevels neerslaan met behulp van een watersproeistraal.
Firefighter Protection
Bij brand een persluchtmasker dragen.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Vermijd stofinhalatie. Gevarenzone ontruimen, noodprocedures volgen, een deskundige raadplegen.
Droog opnemen.
Related Products
Similar products with comparable safety profiles
Tris(hydroxymethyl)aminomethane
CAS: 77-86-1
Tris(hydroxymethyl)aminomethane
CAS: 77-86-1
Tris-(hydroxymethyl)-aminomethaan
CAS: 77-86-1
Tris-(hydroxymethyl)-aminomethaan-hydrochloride
CAS: 1185-53-1
TRIS (HYDROXYMETHYL) AMINOMETHANE HYDROCHLORIDE SALT
CAS: 1185-53-1
TRIS (HYDROXYMETHYL) AMINOMETHANE HYDROCHLORIDE SALT
CAS: 1185-53-1
Trimethylamine-hydrochloride
CAS: 593-81-7
Trimethylamine hydrochloride
CAS: 593-81-7
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Voor voorzorgsmaatregelen zie hoofdstuk 2.2
Goed afgesloten. Droog.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Volledig contact: Materiaal: Nitrilrubber, Minimale laagdikte: 0,11 mm, Doorbraaktijd: 480 min, Getest materiaal: KCL 741 Dermatril® L. Spad contact: Materiaal: Nitrilrubber, Minimale laagdikte: 0,11 mm, Doorbraaktijd: 480 min, Getest materiaal: KCL 741 Dermatril® L. Deze aanbeveling heeft alleen betrekking op het in het veiligheidsinformatieblad genoemde product, voor de door ons aangegeven toepassingen. Wanneer het middel wordt opgelost in, of vermengd met andere substanties, onder andere condities dan vermeld in EN374 neemt u dan svp contact op met de leverancier van de CE-goedgekeurde handschoenen (b.v. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).
Gebruik gezichts- en/of oogbescherming getest en goedgekeurd door officiële instellingen zoals NIOSH (US) of EN166 (EU).
nodig indien stofvorming plaatsvindt. Onze aanbevelingen voor het filteren van de ademhalingsbescherming zijn gebaseerd op de volgende normen: DIN EN 143, DIN 14387 en andere geldende normen m.b.t. het gebruikte ademhalingsbeschermingssysteem. Aanbevolen filtertype: Filter type P1. De ondernemer moet er voor zorgen dat onderhoud, reiniging en beproeving van adembeschermingstoestellen worden uitgevoerd volgens de voorschriften van de leverancier. Deze maatregelen moeten uitvoerig zijn gedocumenteerd.
Product niet in de riolering laten komen.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Het product is chemisch stabiel onder standaard omgevingsvoorwaarden (ka mertemperatuur).
Voor brandbare, organische stoffen en mengsels geldt in het algemeen: bij opwaaiend stof in een overeenkomstig fijne verdeling moet in het algemeen worden uitgegaan van het risico van een stofexplosie.
Heftige reacties mogelijk met: Oxidanten, Basen. Bij aanraking met nitrieten, nitraten, salpererigzuur kunnen mogelijk nitrosaminen (N-nitroseverbindingen) vrijkomen!
geen informatie beschikbaar
Geen gegevens beschikbaar
In geval van brand: zie hoofdstuk 5
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Tris(hydroxymethyl)aminomethane?
The signal word is no signal word.
What is the physical form of Tris(hydroxymethyl)aminomethane?
Tris(hydroxymethyl)aminomethane is a kristallijn with wit color. It has licht, kenmerkend odor.
What is the solubility of Tris(hydroxymethyl)aminomethane?
Ethylacetaat bij 20 °C - weinig oplosbaar Alcohol bij 20 °C - oplosbaar Dimethylformamide bij 20 °C - oplosbaar Aceton bij 20 °C - oplosbaar Chloroform bij 20 °C - bijna onoplosbaar
What is Tris(hydroxymethyl)aminomethane used for?
Laboratoriumchemikaliën, Vervaardiging van stoffen
What is the melting point of Tris(hydroxymethyl)aminomethane?
The melting point is Smeltpunt/-traject: 169 °C bij circa1.013 hPa - Richtlijn test OECD 102 and the boiling point is 288 °C bij 1.013 hPa - Richtlijn test OECD 103 - Afbraak op kookpunt..