Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Interflon Fin Clean All
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Industrieel reinigingsmiddel
Uses advised against
Geen verdere relevante informatie verkrijgbaar.
Manufacturers & Suppliers
Interflon b.v.
manufacturer
P.O. Box 1070, NL-4700 BB Roosendaal, The Netherlands
+31(0)165.55.39.11
http://www.interflon.com
Emergency Contacts
Antigifcentrum/ Centre Antipoisons
+32 (0)70 245 245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mengsel van organische en anorganische basen, oppervlakte actieve stoffen en water.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2-(2-butoxyethoxy)ethanol EC: 203-961-6 | 112-34-5 | 2.5 - 10% | Yes |
| 2,2',2''-nitrilotriethanol EC: 203-049-8 | 102-71-6 | 2.5 - 10% | No |
| Alanine, N,N-bis(carboxymethyl)-, trisodium salt in water | 164462-16-2 | 2.5 - 10% | Yes |
| Alcohols, C9-11, ethoxylated | 68439-46-3 | 2.5 - 10% | Yes |
| Benzenesulfonic acid, C10-13-alkyl derivs., sodium salts EC: 270-115-0 | 68411-30-3 | 2.5 - 10% | Yes |
| Sodium p-cumenesulphonate EC: 239-854-6 | 15763-76-5 | 2.5% | Yes |
| Potassium hydroxide EC: 215-181-3 | 1310-58-3 | 2.5% | Yes |
Dit product bevat geen 'Zeer zorgwekkende stoffen' (SVHC) die voor de gezondheid van mensen of voor het milieu zeer gevaarlijk zijn. (SVHC < 0,1% (g/g) verordening (EG) nr. 1907/2006 (REACH), artikel 57).
First Aid Measures
Emergency procedures for chemical exposure incidents
Veel verse lucht toedienen en voor alle zekerheid een arts raadplegen. Bij bewusteloosheid ligging en vervoer in stabiele zijligging.
Onmiddellijk met water en zeep afwassen en goed naspoelen.
Ogen met open ooglid een aantal minuten onder stromend water afspoelen en dokter raadplegen.
Drink zeer veel water en voer verse lucht aan. Onmiddellijk een dokter waarschuwen.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Brandblusmaatregelen op omgeving afstemmen. CO2, zand, bluspoeder, verneveld water. Schuim
Bij verhitting of brand is het ontstaan van giftige gassen mogelijk.
Firefighter Protection
Adembeschermingsapparaat dragen dat niet afhankelijk is van de omgevingslucht. Persoonlijke beschermingsuitrusting gebruiken (EN469).
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Beschermende kleding aantrekken. Niet beschermde personen op afstand houden. Voor voldoende ventilatie zorgen.
Niet in de riolering/het oppervlaktewater/het grondwater laten terechtkomen. Met veel water verdunnen.
Met vloeistofbindend materiaal (zand, bergmeel, zuurbinder, universele binder, zaagmeel) opnemen.
Materials: zand, bergmeel, zuurbinder, universele binder, zaagmeel
Related Products
Similar products with comparable safety profiles
Interflon Fin Clean All
UFI: Q720-R0D8-P00W-V1XU
Interflon Fin Clean All
---
Interflon Fin Clean All
---
Interflon Fin Clean All
---
Interflon Fin Clean All
---
Interflon Clean Special
---
Interflon Foam Clean (Aerosol)
UFI: QN40-W0QD-800R-DM8N
Interflon Foam Clean (Aerosol)
UFI: U300-304C-100H-CHD7
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Nevel/damp/spuitnevel niet inademen.
Tanks ondoordringbaar gesloten houden.
Geen bijzondere maatregelen noodzakelijk.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Kies handschoenmateriaal rekening houdend met de penetratietijden, de permeatiegraden en de degradatie. Veiligheidshandschoenen. De keuze van een geschikte handschoen is niet alleen afhankelijk van het materiaal, maar ook van andere kwaliteitskenmerken en verschilt van fabrikant tot fabrikant. Aangezien het product uit meerdere stoffen is samengesteld, is de duurzaamheid van de handschoenmaterialen niet vooraf berekenbaar en moet derhalve vóór het gebruik worden getest. Op basis van praktijkervaring bieden handschoenen van nitrile voldoende bescherming. Handschoendikte: 0,13 mm. De precieze penetratietijd kunt u te weten komen bij de handschoenfabrikant; houd er rekening mee.
Nauw aansluitende veiligheidsbril (EN166)
Draag geschikte beschermende arbeidskleding (EN340)
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Geen verdere relevante informatie verkrijgbaar.
Sterk exothermische reactie met zuren.
Om thermische ontleding te vermijden niet oververhitten.
Sterke oxidatoren
Bij thermische ontleding kunnen gevaarlijke gassen gevormd worden (bv. CO, CO2 en NOx).
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3267
- Shipping Name
- BIJTENDE BASISCHE ORGANISCHE VLOEISTOF, N.E.G. (KALIUMHYDROXIDE, OPLOSSING)
- Transport Class
- 8
- Packing Group
- III
Waarschuwing: Bijtende stoffen
Waarschuwing: Bijtende stoffen
Waarschuwing: Bijtende stoffen
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Interflon Fin Clean All?
The signal word is danger.
What is the physical form of Interflon Fin Clean All?
Interflon Fin Clean All is a liquid appearing as blauw with blauw color. It has mild odor.
What is Interflon Fin Clean All used for?
Industrieel reinigingsmiddel
What are the hazard statements for Interflon Fin Clean All?
This substance has 2 hazard statements:
- H290: Kan bijtend zijn voor metalen.
- H314: Veroorzaakt ernstige brandwonden en oogletsel.
What is the melting point of Interflon Fin Clean All?
The melting point is -12 °C and the boiling point is > 100 °C.