NextSDS Logo
Safety Data Sheet NL

Fiberfrax

CAS 142844-00-6

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Fiberfrax
Product Code
CH1095
Chemical Name
Vuurvast materiaal, vezels, aluminosilicaat

Regulatory Identifiers

CAS Number
142844-00-6 Check regulations →
REACH No.
01-2119458050-50-xxxx

Identified Uses

Het gebruik van de producten wordt beperkt tot "beroepsmatige gebruikers" voor toepassing als thermische isolatie, hitteschermen, hittebeperking, pakkingen en uitzetvoegen bij temperaturen tot 1260°C in industriële ovens, ovens, kilns, ketels en andere procesapparatuur en in de ruimtevaart- en automobielindustrie. De producten zijn niet bedoeld voor directe verkoop aan het publiek. Primair gebruik: de vervaardiging van vezels (heeft betrekking op de aanvankelijke productie van de vezels en dus niet op het gebruik, secundair, tertiair etc.). Secundair gebruik: de omvorming tot natte en droge mengsels en artikelen (raadpleeg hoofdstuk 8). Tertiair gebruik: installatie, verwijdering (industrieel en beroepsmatig) / onderhoud en gebruiksduur (industrieel en beroepsmatig) (raadpleeg hoofdstuk 8).

Uses advised against

Het spuiten van het product wordt afgeraden.

Manufacturers & Suppliers

INSULCON B.V. logo

INSULCON B.V.

national supplier

P.O. Box 134 4650 AC STEENBERGEN, The Netherlands Zilverhoek 4, 4651 SP STEENBERGEN

+31 (0)167-565750

http://www.insulcon.com

K

KERAMAB N.V.

national supplier

Belgium

+32 (0)3 711.02.78

I

INSULCON GMBH

national supplier

Germany

+49 (0) 2162 249 60-0

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Carc. Cat. 1B H350i

GHS Pictograms

GHS08 - Serious health hazard

GHS08

Hazard Statements

H350i Kan kanker veroorzaken bij inademing

Precautionary Statements

P202 Uitsluitend hanteren als alle veiligheidsinstructies zijn gelezen en begrepen.
P281 Gebruik de nodige persoonlijke beschermingsmiddelen.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

SiO₂ 45-60% - Al₂O₃ 40-55%

Chemical Name CAS Number Concentration Hazardous
SiO₂ --- 45 - 60% No
Al₂O₃ --- 40 - 55% No
Vuurvaste keramische vezels (aluminosilicaatvezels) --- 100% No

Fiberfrax producten zijn in een reeks verschillende vormen verkrijgbaar: bulk, dekens, papier, vilt, plaatmateriaal, vormen, modules, cement, textiel (gevlochten, touwen en doek), coatings, mengsels, mastiek. (Referentie: BS EN 1094-1: 1997).

Notes

Geen van de bestanddelen zijn echter radio-actief onder de voorwaarden van de Europese Richtlijn Euratom 96/29.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Als de neus en keel geïrriteerd raken, moet men naar een stofvrije ruimte gaan, water drinken en de neus snuiten.

Skin contact

Bij irritatie van de huid moeten de aangetaste delen met water worden afgespoeld en voorzichtig worden gewassen. Blootgestelde huid niet schrobben of krabben.

Eye contact

Bij contact met de ogen met ruime hoeveelheden water spoelen; houd oogbad in de buurt. Niet in de ogen wrijven.

Immediate Medical Attention

Raadpleeg een arts als de symptomen aanhouden.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Ph
Niet van toepassing
Odor
Geen
Boiling Point
Niet van toepassing
Density
---
Upper Explosive Limit
---
Partition Coefficient
Niet van toepassing
Solidification Point
---
Properties Status
---
Freezing Point
---
Auto Ignition Temperature
Niet van toepassing
Physical State Data
solid
Melting Point
> 1650°C
Flammability
Niet van toepassing
Appearance
Witte vaste stof
Kinematic Viscosity
---
Vapor Density
---
Solubility
Minder dan 1 mg/l
Flash Point
Niet van toepassing
State Under Standard Conditions
---
Crystallisation Point
---
Evaporation Rate
---
Softening Point
---
Lower Explosive Limit
---
Cloud Point
---
Relative Evaporation Rate
---
Physical State
solid
Form
vaste stof
Colour Intensity
---
Dynamic Viscosity
---
Solubility In Fat
---
Metal Corrosion
---
Explosive Limits
---
Voc Content
---
Relative Density
Niet van toepassing
Vapor Pressure
Niet van toepassing
Colour
Witte
Bulk Density
---
Molecular Weight
---
Odor Threshold
---
Solubility In Water
---
Decomposition Temperature
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Fiberfrax?

The signal word is danger.

What is the physical form of Fiberfrax?

Fiberfrax is a solid appearing as witte vaste stof with witte color. It has geen odor.

What is the solubility of Fiberfrax?

Minder dan 1 mg/l

What is Fiberfrax used for?

Het gebruik van de producten wordt beperkt tot "beroepsmatige gebruikers" voor toepassing als thermische isolatie, hitteschermen, hittebeperking, pakkingen en uitzetvoegen bij temperaturen tot 1260°C in industriële ovens, ovens, kilns, ketels en andere procesapparatuur en in de ruimtevaart- en automobielindustrie. De producten zijn niet bedoeld voor directe verkoop aan het publiek. Primair gebruik: de vervaardiging van vezels (heeft betrekking op de aanvankelijke productie van de vezels en dus niet op het gebruik, secundair, tertiair etc.). Secundair gebruik: de omvorming tot natte en droge mengsels en artikelen (raadpleeg hoofdstuk 8). Tertiair gebruik: installatie, verwijdering (industrieel en beroepsmatig) / onderhoud en gebruiksduur (industrieel en beroepsmatig) (raadpleeg hoofdstuk 8).

What are the hazard statements for Fiberfrax?

This substance has 1 hazard statement:

  • H350i: Kan kanker veroorzaken bij inademing

What is the melting point of Fiberfrax?

The melting point is > 1650°C and the boiling point is Niet van toepassing.