Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Tin(II)-chloride-dihydraat voor analyse EMSURE® ACS,ISO,Reag. Ph Eur
- Product Code
- 1.07815
- Chemical Name
- Tin(II)-chloride-dihydraat
Regulatory Identifiers
- CAS Number
- 10025-69-1 Check regulations →
- REACH No.
- 01-2119971277-28-XXXX
Identified Uses
Reagens voor analyse
Manufacturers & Suppliers
Millipore
manufacturer
Merck Life Science BV/SRL
national supplier
Brusselsesteenweg 288, B-3090 OVERIJSE
+32 (0)3 899-1301
Emergency Contacts
CHEMTREC
+(32) 28 083237
Anti-poison centre
070 245245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Stannous chloride dihydrate EC: 231-868-0 | 10025-69-1 | 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Na inademen: frisse lucht. Direct een arts waarschuwen. Bij ademstilstand: Meteen mechanische beademing, eventueel zuurstof toedienen.
Bij aanraking met de huid: Verontreinigde kleding onmiddellijk uittrekken. Huid met water afspoelen/ afdouchen. Onmiddellijk een arts waarschuwen.
Na oog contact: uitspoelen met ruim voldoende water. Onmiddellijk een oogarts raadplegen. Contactlenzen uitnemen.
Na inslikken: slachtoffer water laten drinken (niet meer dan twee glazen), braken voorkomen (perforatiegevaar!). Onmiddellijk een arts waarschuwen. Niet proberen te neutraliseren.
Immediate Medical Attention
Direct een arts waarschuwen.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Gebruik blusmiddelen die geschikt zijn voor de plaatselijke omstandigheden en de omgeving.
Voor deze stof / dit mengsel gelden geen beperkingen voor blusmiddelen.
Chloorwaterstofgas, tin/tinoxiden. Niet brandbaar. Door brand in de omgeving is het ontstaan van gevaarlijke dampen mogelijk.
Houd een veilige afstand.
Firefighter Protection
Blijf niet in de gevarenzone zonder beademingsapparatuur die onafhankelijk is van de omgevingslucht. Om huidcontact te vermijden, houd een veilige afstand en draag geschikte beschermende kleding.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Vermijd stofinhalatie. Vermijd contact met de stof. Zorg voor voldoende ventilatie. Gevarenzone ontruimen, noodprocedures volgen, een deskundige raadplegen.
Product niet in de riolering laten komen.
Droog opnemen. Vervuild oppervlak schoonmaken.
Related Products
Similar products with comparable safety profiles
Tin(II)-chloride-dihydronat voor analyse EMSURE® ACS, ISO, Reag. Ph Eur
CAS: 10025-69-1
IJzer(III)chloride-hexahydraat voor analyse EMSURE® ACS,Reag. Ph Eur
CAS: 10025-77-1
IJzer(III)chloride-hexahydraat voor analyse EMSURE® ACS,Reag. Ph Eur
CAS: 10025-77-1
IJzer(III)chloride-hexahydraat voor analyse EMSURE® ACS, Reag. Ph Eur
CAS: 10025-77-1
IJzer(III)chloride-hexahydraat voor analyse EMSURE®, Reag. Ph Eur
CAS: 10025-77-1
Calciumchloride-dihydraat voor analyse EMSURE® ACS,Reag. Ph Eur
CAS: 10035-04-8
Calciumchloride-dihydraat voor analyse EMSURE® ACS,Reag. Ph Eur
CAS: 10035-04-8
Calciumchloride-dihydraat voor analyse EMSURE® ACS, Reag. Ph Eur
CAS: 10035-04-8
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Stof/mengsel niet inademen.
Goed afgesloten. Droog.
Verontreinigde kleding meteen vervangen. Gebruik huidbeschermende crème. Na het werken met de stof handen en gezicht wassen.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Materiaal: Nitrilrubber, Minimale laagdikte: 0,11 mm, Doorbraaktijd: 480 min, Getest materiaal: KCL 741 Dermatril® L
Gebruik gezichts- en/of oogbescherming getest en goedgekeurd door officiële instellingen zoals NIOSH (US) of EN166 (EU). Nauw aansluitende veiligheidsstofbril
nodig indien stofvorming plaatsvindt. Onze aanbevelingen voor het filteren van de ademhalingsbescherming zijn gebaseerd op de volgende normen: DIN EN 143, DIN 14387 en andere geldende normen m.b.t. het gebruikte ademhalingsbeschermingssysteem. Aanbevolen filtertype: Filter type P2. De ondernemer moet er voor zorgen dat onderhoud, reiniging en beproeving van adembeschermingstoestellen worden uitgevoerd volgens de voorschriften van de leverancier. Deze maatregelen moeten uitvoerig zijn gedocumenteerd.
beschermende kleding
Product niet in de riolering laten komen.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Het product is chemisch stabiel onder standaard omgevingsvoorwaarden (kamertemperatuur).
Geen gegevens beschikbaar
Heftige reacties mogelijk met: Sterke zuren, waterstofperoxide. Kans op ontbranding of vorming van brandbare gassen of dampen met: halogeen-halogeen verbindingen, Ethyleenoxide, carbiden. Gevaar voor ontploffing met: hydrazine en derivaten, nitraten, Alkalimetalen, Sterke oxidatiemiddelen.
Blootstelling aan vocht kan de kwaliteit van het product beïnvloeden. Eksponering for luft kan påvirke kvaliteten til produktet.
Sterke zuren, waterstofperoxide, halogeen-halogeen verbindingen, Ethyleenoxide, carbiden, hydrazine en derivaten, nitraten, Alkalimetalen, Sterke oxidatiemiddelen.
In geval van brand: zie hoofdstuk 5
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3260
- Shipping Name
- BIJTENDE ZURE ANORGANISCHE VASTE STOF, N.E.G. (Stannous chloride dihydrate)
- Transport Class
- 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Tin(II)-chloride-dihydraat voor analyse EMSURE® ACS,ISO,Reag. Ph Eur?
The signal word is danger.
What is the physical form of Tin(II)-chloride-dihydraat voor analyse EMSURE® ACS,ISO,Reag. Ph Eur?
Tin(II)-chloride-dihydraat voor analyse EMSURE® ACS,ISO,Reag. Ph Eur is a vast with wit color. It has reukloos odor.
What is Tin(II)-chloride-dihydraat voor analyse EMSURE® ACS,ISO,Reag. Ph Eur used for?
Reagens voor analyse
What are the hazard statements for Tin(II)-chloride-dihydraat voor analyse EMSURE® ACS,ISO,Reag. Ph Eur?
This substance has 7 hazard statements:
- H290: Kan bijtend zijn voor metalen.
- H302 + H332: Schadelijk bij inslikken en bij inademing.
- H314: Veroorzaakt ernstige brandwonden en oogletsel.
- H317: Kan een allergische huidreactie veroorzaken.
- H335: Kan irritatie van de luchtwegen veroorzaken.
- H373: Kan schade aan organen (Hart en vaatstelsel) veroorzaken bij langdurige of herhaalde blootstelling bij inslikken.
- H412: Schadelijk voor in het water levende organismen, met langdurige gevolgen.
What is the melting point of Tin(II)-chloride-dihydraat voor analyse EMSURE® ACS,ISO,Reag. Ph Eur?
The melting point is Smeltpunt: 38 °C and the boiling point is Geen gegevens beschikbaar.