Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
1,3-Dichloro-2-nitrobenzene is a crystal - powder substance commonly used for laboratory research purposes..
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS07
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H319: Causes serious eye irritation
- H315: Causes skin irritation
- H302: Harmful if swallowed
- H312: Harmful in contact with skin
- H332: Harmful if inhaled
Precautionary Statements
- Do not eat, drink or smoke when using this product.
- Wash hands and face thoroughly after handling.
- Wear protective gloves and protective clothing.
- Avoid breathing dusts or mists.
- Use only outdoors or in a well-ventilated area.
- Wear protective gloves.
- Wear eye and face protection.
- If swallowed: Immediately call a poison center or doctor. Rinse mouth.
- If on skin: Wash with plenty of water. Call a poison center or doctor if you feel unwell.
- Take off contaminated clothing and wash it before reuse.
- If inhaled: Remove person to fresh air and keep comfortable for breathing.
- If skin irritation or rash occurs: Get medical advice/attention.
- If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- If eye irritation persists: Get medical advice or attention.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
TCI America
manufacturer
9211 N. Harborgate Street, Portland, OR 97203 U.S.A.
US
+1-800-423-8616
+1-888-520-1075
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
TCI America
+1-503-286-7624
US
8:00am - 5:00pm PST
Chemical Emergencies
Chemtrec
+1-800-424-9300
US
24-Hour
Transportation Emergencies
Chemtrec
+1-703-527-3887
US
24-Hour
Transportation Emergencies
TCI America
+1-503-286-7624
US
Responsible department: Environmental Health Safety and Security
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
substanceChemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 1,3-Dichloro-2-nitrobenzene | 601-88-7 | Not specified | ✓ Non-hazardous |
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Move victim to fresh air. Give artificial respiration if victim is not breathing. Administer oxygen if breathing is difficult. Keep victim warm and quiet.
Symptoms:
Harmful if inhaled. Effects of exposure to substance may be delayed.
🖐️ Skin Contact
Remove and wash contaminated clothing before re-use. Immediately flush skin with running water for at least 20 minutes.
Symptoms:
Redness.
👁️ Eye Contact
IMMEDIATELY flush eyes with running water for at least 15 minutes, keeping eyelids open. Call emergency medical service.
Symptoms:
Contact with material may irritate or burn eyes.
🍽️ Ingestion/Swallowing
Do not induce vomiting without medical advice. Call a physician or Poison Control Center immediately. Rinse mouth. Keep victim warm and quiet.
Symptoms:
Harmful if swallowed.
🚨 Immediate Medical Attention Required
WARNING: It might be hazardous to the person providing aid to give mouth-to-mouth respiration, because the inhaled material is harmful. If breathing has stopped, perform artificial respiration.
Medical Treatment
Use first aid treatment according to the nature of the injury.
Fire Fighting Measures & Emergency Response
Fire suppression methods, extinguishing media, and firefighting safety procedures
✅ Suitable Extinguishing Media
Dry chemical, CO2, sand, earth, water spray or regular foam. Consult with local fire authorities before attempting large scale fire fighting operations.
⚠️ Specific Fire Hazards
These products include: Carbon oxides, Nitrogen oxides, Halogenated compounds. WARNING: Highly toxic HCI gas is produced during combustion.
🔥 Fire Fighting Instructions
Use water spray or fog; do not use straight streams. Dike fire-control water for later disposal; do not scatter the material. Containers may explode when heated. Move containers from fire area if you can do it without risk.
Accidental Release Measures & Spill Response
Emergency spill cleanup procedures, containment methods, and environmental protection
🚨 Emergency Procedures
Prevent dust cloud. In case of a spill and/or a leak, always shut off any sources of ignition, ventilate the area, and exercise caution. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Warn personnel to move away. Prevent entry into sewers, basements or confined areas; dike if needed.
🌍 Environmental Precautions
Keep away from living quarters. Prevent further leakage or spillage if safe to do so. Water runoff can cause environmental damage.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Safe Handling & Storage Procedures
Industrial handling precautions, storage conditions, and workplace safety requirements
⚠️ Handling Precautions
• Avoid inhalation of vapor or mist.
• Do not ingest.
• Avoid contact with skin and eyes.
• Good general ventilation should be sufficient to control airborne levels.
• Keep container dry.
• Handle and open container with care.
• Wear suitable protective clothing, gloves and eye/face protection.
• When using do not eat, drink, or smoke.
• Keep away from sources of ignition.
🏪 Storage Conditions
• Keep only in the original container in a cool well-ventilated place.
• Keep away from incompatibles.
• Containers which are opened must be carefully resealed and kept upright to prevent leakage.
• Avoid prolonged storage periods.
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
Good general ventilation should be sufficient to control airborne levels. Ventilation is normally required when handling or using this product. Eyewash fountains should be provided in areas where there is any possibility that workers could be exposed to the substance. Follow safe industrial engineering/laboratory practices when handling any chemical.
🧤 Hand Protection
Nitrile gloves.
👁️ Eye Protection
Safety glasses.
😷 Respiratory Protection
Dust respirator. Be sure to use a MSHA/NIOSH approved respirator or equivalent.
🦺 Skin/Body Protection
Lab coat.
Chemical Stability & Reactivity Data
Chemical stability, hazardous reactions, and incompatible materials information
✅ Chemical Stability
Stable under recommended storage conditions.
⚠️ Hazardous Reactions
No hazardous reactivity has been reported.
🚫 Conditions to Avoid
Avoid excessive heat and light.
🧪 Incompatible Materials
Oxidizing agents
💨 Hazardous Decomposition Products
No data available
Ecological Information & Environmental Impact
Environmental toxicity, biodegradation, bioaccumulation, and ecological effects data
🌱 Ecotoxicity
🌱 Persistence and degradability
🌱 Bioaccumulative potential (BCF)
🌱 Mobility in soil
🌱 Partition coefficient
🌱 n-octanol/water (log Pow)
🌱 Soil adsorption (Koc)
Waste Disposal & Treatment Methods
Waste disposal procedures, treatment methods, and regulatory compliance requirements
♻️ Waste Treatment Methods
Recycle to process if possible. You may be able to dissolve or mix material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber system.
🗂️ Product Disposal Recommendations
Dispose of as unused product. Do not re-use empty containers.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
Regulatory Information & Compliance
Chemical regulations, safety assessments, and regulatory compliance status
📋 Regulatory Summary
This product is NOT on the EPA Toxic Substances Control Act (TSCA) inventory. The following notices are required by 40 CFR 720.36 (C) for those products not on the inventory list: (i) These products are supplied solely for use in research and development by or under the supervision of a technically qualified individual as defined in 40 CFR 720.0 et sec. (ii) The health risks of these products have not been fully determined. Any information that is or becomes available will be supplied on a SDS sheet.
❌ Chemical Safety Assessment
No chemical safety assessment has been performed for this substance.
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for 1,3-Dichloro-2-nitrobenzene?
The signal word for this substance is "warning".
What is the physical form of 1,3-Dichloro-2-nitrobenzene?
1,3-Dichloro-2-nitrobenzene is a solid appearing as crystal - powder with white - pale yellow color. It has no data available odor.
What is the solubility of 1,3-Dichloro-2-nitrobenzene?
Soluble: Methanol
What is 1,3-Dichloro-2-nitrobenzene used for?
For laboratory research purposes.
What are the hazard statements for 1,3-Dichloro-2-nitrobenzene?
This substance has 5 hazard statements: H319: Causes serious eye irritation H315: Causes skin irritation H302: Harmful if swallowed H312: Harmful in contact with skin H332: Harmful if inhaled
What is the melting point of 1,3-Dichloro-2-nitrobenzene?
The melting point is 71°C (160°F) and the boiling point is 130°C (266°F)/1.1kPa.