NextSDS Logo
Safety Data Sheet EN

1,2-Dichloro-3-nitrobenzene

CAS 3209-22-1
EC 221-717-7

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
1,2-Dichloro-3-nitrobenzene
Product Code
A15037, L08294

Regulatory Identifiers

CAS Number
3209-22-1 Check regulations →
EC Number
221-717-7 Check regulations →

Identified Uses

SU24 Scientific research and development

Manufacturers & Suppliers

Alfa Aesar, Thermo Fisher Scientific Chemicals, Inc. logo

Alfa Aesar, Thermo Fisher Scientific Chemicals, Inc.

manufacturer

30 Bond Street, Ward Hill, MA 01835-8099

800-343-0660

http://www.alfa.com

Emergency Contacts

Emergency Contact

(800) 343-0660

Monday-Friday, 8am-7pm EST

Carechem 24

(866) 928-0789

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

STOT RE Cat. 2 H373
Acute Tox. Cat. 4 H302

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H302 Harmful if swallowed.
H373 May cause damage to organs through prolonged or repeated exposure.

Precautionary Statements

P273 Avoid release to the environment.
P280 Wear protective clothing.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
1,2-Dichloro-3-nitrobenzene EC: 221-717-7 3209-22-1 --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air. If required, provide artificial respiration. Keep patient warm. Seek immediate medical advice.

Skin contact

Immediately wash with water and soap and rinse thoroughly. Seek immediate medical advice.

Eye contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Ingestion

Seek medical treatment.

Immediate Medical Attention

Seek immediate medical advice for inhalation and skin contact. Consult a doctor for eye contact. Seek medical treatment for swallowing.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Carbon dioxide, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.

Specific hazards

If this product is involved in a fire, the following can be released: Carbon monoxide and carbon dioxide, Nitrogen oxides (NOx), Hydrogen chloride (HCl)

Firefighter Protection

Wear self-contained respirator. Wear fully protective impervious suit.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Do not allow product to reach sewage system or any water course.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Keep container tightly sealed. Store in cool, dry place in tightly closed containers. Ensure good ventilation at the workplace.

Storage

Keep container tightly sealed. Store in cool, dry conditions in well sealed containers.

Fire prevention

No information known.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.

Hands

Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer.

Eyes

Safety glasses

Respiratory

Use suitable respirator when high concentrations are present. Recommended filter device for short term use: Use a respirator with type P100 (USA) or P3 (EN 143) cartridges as a backup to engineering controls. Risk assessment should be performed to determine if air-purifying respirators are appropriate. Only use equipment tested and approved under appropriate government standards.

Skin/Body

Protective work clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Crystalline
Physical State Data
solid
State Under Standard Conditions
---
Appearance
Crystalline
Colour
Pale yellow to pale brown
Colour Intensity
---
Form
Crystalline
Odor
Not determined
Odor Threshold
Not determined.
Ph
Not applicable.
Melting Point
60-64 °C (140-147 °F)
Boiling Point
257-258 °C (495-496 °F)
Flash Point
123 °C (253 °F)
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not applicable.
Vapor Pressure
Not applicable.
Vapor Density
Not applicable.
Relative Density
Not determined.
Bulk Density
---
Density
1.45 g/cm³ (12.1 lbs/gal)
Flammability
Not determined.
Upper Explosive Limit
Not determined
Lower Explosive Limit
Not determined
Explosive Limits
---
Auto Ignition Temperature
Not determined
Decomposition Temperature
Not determined
Solubility
0.067 g/l in water at 20 ℃ (68 ºF)
Partition Coefficient
Not determined.
Solubility In Water
0.067 g/l
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
Not applicable.
Kinematic Viscosity
Not applicable.
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Reactivity

No information known.

Hazardous reactions

Reacts with strong oxidizing agents

Avoid

No further relevant information available.

Incompatible

Oxidizing agents

Decomposition

Carbon monoxide and carbon dioxide, Nitrogen oxides, Hydrogen chloride (HCl)

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Consult state, local or national regulations to ensure proper disposal.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN3077
Shipping Name
Environmentally hazardous substances, solid, n.o.s. (1,2-Dichloro-3-nitrobenzene)
Transport Class
9
Packing Group
III
ADR

Warning: Miscellaneous dangerous substances and articles

IMDG

Warning: Miscellaneous dangerous substances and articles

IATA

Warning: Miscellaneous dangerous substances and articles

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for 1,2-Dichloro-3-nitrobenzene?

The signal word is warning.

What is the physical form of 1,2-Dichloro-3-nitrobenzene?

1,2-Dichloro-3-nitrobenzene is a crystalline appearing as crystalline with pale yellow to pale brown color. It has not determined odor.

What is the solubility of 1,2-Dichloro-3-nitrobenzene?

0.067 g/l in water at 20 ℃ (68 ºF)

What is 1,2-Dichloro-3-nitrobenzene used for?

SU24 Scientific research and development

What are the hazard statements for 1,2-Dichloro-3-nitrobenzene?

This substance has 2 hazard statements:

  • H302: Harmful if swallowed.
  • H373: May cause damage to organs through prolonged or repeated exposure.

What is the melting point of 1,2-Dichloro-3-nitrobenzene?

The melting point is 60-64 °C (140-147 °F) and the boiling point is 257-258 °C (495-496 °F).