Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 1-tert-Butoxy-2-propanol
- Product Code
- HA-5172
Regulatory Identifiers
- CAS Number
- 57018-52-7 Check regulations →
Identified Uses
Laboratory chemicals, for scientific research and development only.
Manufacturers & Suppliers
Combi-Blocks, Inc.
manufacturer
7949 Silverton Ave # 915, San Diego, CA 92126, USA
Emergency Contacts
Combi-Blocks, Inc.
1-858-635-8950
Monday-Friday 8am-5pm PST
Infotrac
1-800-535-5053
Infotrac
1-352-323-3500
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 1-tert-Butoxy-2-propanol | --- | 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove victim to fresh air. In severe cases or if symptoms persist, seek medical attention.
Immediately wash skin with copious amounts of water for at least 15 minutes while removing contaminated clothing and shoes. If irritation persists, seek medical attention.
Immediately flush with plenty of water. After initial flushing, remove any contact lenses and continue flushing for at least 15 minutes. Keep eye wide open while rinsing. Get medical attention.
Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention.
Immediate Medical Attention
No data.
Medical Treatment
No data.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use dry sand, dry chemical or alcohol-resistant foam for extinction.
Carbon monoxide.
Firefighter Protection
Wear self-contained breathing apparatus for firefighting if necessary.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. Use personal protective equipment.
Should not be released into the environment. See Section 12 for additional ecological information.
Sweep up or vacuum up spillage and collect in suitable container for disposal.
Materials: suitable container
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes. Avoid inhalation of vapour or mist. Keep away from sources of ignition - No smoking. Take measures to prevent the build up of electrostatic charge.
Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage.
Keep away from sources of ignition - No smoking. Take measures to prevent the build up of electrostatic charge.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure that eyewash stations and safety showers are close to the workstation location. Ensure adequate ventilation, especially in confined areas.
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Complete suit protecting against chemicals, Flame retardant antistatic protective clothing., The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
No data
No data
No data.
Hazardous decomposition products formed under fire conditions: Carbon monoxide. Other decomposition products: No data
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Arrange disposal as special waste, by licensed disposal company, in consultation with local waste disposal authority, in accordance with national and regional regulations.
Arrange disposal as special waste, by licensed disposal company, in consultation with local waste disposal authority, in accordance with national and regional regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 1-tert-Butoxy-2-propanol?
The signal word is no signal word.
What is the physical form of 1-tert-Butoxy-2-propanol?
1-tert-Butoxy-2-propanol is a liquid appearing as liquid . It has no data odor.
What is the solubility of 1-tert-Butoxy-2-propanol?
No data
What is 1-tert-Butoxy-2-propanol used for?
Laboratory chemicals, for scientific research and development only.
What is the melting point of 1-tert-Butoxy-2-propanol?
The melting point is No date. and the boiling point is No data.