Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Aluminum sulfate, anhydrous
- Product Code
- 44563
- Chemical Name
- Aluminum sulfate, anhydrous
Regulatory Identifiers
- CAS Number
- 10043-01-3 Check regulations →
- EC Number
- 233-135-0 Check regulations →
Identified Uses
SU24 Scientific research and development
Manufacturers & Suppliers
Alfa Aesar
manufacturer
30 Bond Street, Ward Hill, MA 01835-8099
800-343-0660
http://www.alfa.com
Emergency Contacts
Emergency Contact
(800) 343-0660
Monday-Friday, 8am-7pm EST
Carechem 24
(866) 928-0789
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Aluminum sulfate EC: 233-135-0 | 10043-01-3 | --- | No |
Identification number(s): EC number: 233-135-0
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air. If required, provide artificial respiration. Keep patient warm.
Symptoms: May cause respiratory irritation.
Immediately wash with water and soap and rinse thoroughly.
Symptoms: Causes skin irritation.
Rinse opened eye for several minutes under running water.
Symptoms: Causes serious eye damage.
Immediate Medical Attention
Seek immediate medical advice for inhalation and skin contact. Consult a doctor for eye contact. Seek medical treatment for swallowing.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use fire-fighting measures that suit the surrounding fire.
If this product is involved in a fire, the following can be released: Sulfur oxides (SOx), Aluminum oxide
Firefighter Protection
Wear self-contained respirator. Wear fully protective impervious suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away.
Do not allow product to reach sewage system or any water course.
Related Products
Similar products with comparable safety profiles
Aluminum sulfate hydrate
CAS: 17927-65-0
Aluminum Sulfate
CAS: 10043-01-3
Aluminium Sulfate
---
Aluminum potassium sulfate
CAS: 7784-24-9
Aluminum fluoride, anhydrous
CAS: 7784-18-1
Aluminum chloride hydroxide sulfate
CAS: 39290-78-3
Calcium sulfate, anhydrous
CAS: 7778-18-9
Aluminium sulphate hydrate
CAS: 17927-65-0
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle under dry protective gas. Keep container tightly sealed.
Store in cool, dry place in tightly closed containers.
The product is not flammable.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Material of gloves: Nitrile rubber, NBR. Penetration time of glove material (in minutes) 480. Gloves thickness 0.11 mm
Tightly sealed goggles
Use suitable respirator when high concentrations are present. Recommended filter device for short term use: Use a respirator with type P100 (USA) or P3 (EN 143) cartridges as a backup to engineering controls. Risk assessment should be performed to determine if air-purifying respirators are appropriate. Only use equipment tested and approved under appropriate government standards.
Protective work clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
No information known.
Reacts with strong oxidizing agents
Decomposition will not occur if used and stored according to specifications.
Water/moisture, Oxidizing agents
Sulfur oxides (SOx) Aluminum oxide
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
Toxicity
No further relevant information available regarding aquatic toxicity.
Persistence and degradability
No further relevant information available.
Bioaccumulative potential
No further relevant information available.
12.4 Mobility in soil
Results of PBT and vPvB assessment
The substance is not classified as PBT or vPvB.
Other adverse effects
No further relevant information available.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Consult state, local or national regulations to ensure proper disposal.
Consult state, local or national regulations to ensure proper disposal.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- Transport Class
- Not applicable
- Packing Group
- Not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
For use only by technically qualified individuals.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Aluminum sulfate, anhydrous?
The signal word is danger.
What is the physical form of Aluminum sulfate, anhydrous?
Aluminum sulfate, anhydrous is a solid . It has not determined odor.
What is the solubility of Aluminum sulfate, anhydrous?
Soluble
What is Aluminum sulfate, anhydrous used for?
SU24 Scientific research and development
What are the hazard statements for Aluminum sulfate, anhydrous?
This substance has 3 hazard statements:
- H315: Causes skin irritation.
- H318: Causes serious eye damage.
- H335: May cause respiratory irritation.
What is the melting point of Aluminum sulfate, anhydrous?
The melting point is 770 °C (1418 °F) and the boiling point is Not determined.