Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Aluminum Sulfate
- Chemical Name
- aluminium sulphate
Regulatory Identifiers
- CAS Number
- 10043-01-3 Check regulations →
Identified Uses
Water treatment chemical, Flocculant
Manufacturers & Suppliers
Valudor Products, LLC
manufacturer
179 Calle Magdalena Suite 100, Encinitas, California CA 92024, United States
+1 (760) 635 8500
http://www.valudor.com
Emergency Contacts
Infotrac
800-535-5053
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| aluminium sulphate | 10043-01-3 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air. If breathing is irregular or stopped, immediately seek medical assistance and start first aid actions.
Wash with plenty of soap and water. If skin irritation occurs: Get medical advice/attention. Wash contaminated clothing before reuse.
Rinse immediately carefully and thoroughly with eye shower or water. Remove contact lenses, if present and easy to do. Continue rinsing. Get immediate medical advice/attention.
Rinse mouth. Do not induce vomiting. Get medical advice/attention.
Immediate Medical Attention
If breathing is irregular or stopped, immediately seek medical assistance. Get medical advice/attention for skin irritation, eye contact, or ingestion.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
water, foam, alcohol resistant foam, fire extinguishing powder
water jet
In case of fire and/or explosion do not breathe fumes. Coordinate firefighting measures to the fire surroundings. Fight fire with normal precautions from a reasonable distance.
Firefighter Protection
In case of fire and/or explosion do not breathe fumes.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Remove persons to safety. Ventilate affected area. Control of dust. Do not breathe dust. Do not get in eyes, on skin, or on clothing.
Keep away from drains, surface and ground water. Retain contaminated washing water and dispose of it.
Take up mechanically. Collect spillage.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not breathe dust. Do not get in eyes, on skin, or on clothing. Wash hands after use. Preventive skin protection (barrier creams/ointments) is recommended.
Store in a dry place. Store in a closed container. Keep away from food, drink and animal feedingstuffs.
Do not eat, drink and smoke in work areas. Remove contaminated clothing and protective equipment before entering eating areas. Wash hands after use.
None.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
General ventilation.
Material: NR: natural rubber, latex (≥ 0,5 mm, >480 minutes), CR: chloroprene (chlorobutadiene) rubber (≥ 0,5 mm, >480 minutes), NBR: acrylonitrile-butadiene rubber (≥ 0,35 mm, >480 minutes), IIR: isobutene-isoprene (butyl) rubber (≥ 0,5 mm, >480 minutes), FKM: fluoro-elastomer (≥ 0,4 mm, >480 minutes), PVC: polyvinyl chloride (≥ 0,5 mm, >480 minutes). Wear suitable gloves. Chemical protection gloves are suitable, which are tested according to EN 374. Check leak-tightness/impermeability prior to use. In the case of wanting to use the gloves again, clean them before taking off and air them well. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves.
Wear eye/face protection.
In case of inadequate ventilation wear respiratory protection. Particulate filter device (EN 143).
Protective clothing for use against solid particulates.
Use appropriate container to avoid environmental contamination. Keep away from drains, surface and ground water.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The material is stable under normal ambient and anticipated storage and handling conditions of temperature and pressure.
Hygroscopic substance.
Becomes corrosive to metals on contact with moisture.
Protect from moisture.
water, acids, bases
Sulfur oxides (SOx). Hazardous combustion products: see section 5.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Aluminum Sulfate?
The signal word is danger.
What is the physical form of Aluminum Sulfate?
Aluminum Sulfate is a solid with white - beige color. It has odorless odor.
What is Aluminum Sulfate used for?
Water treatment chemical, Flocculant
What are the hazard statements for Aluminum Sulfate?
This substance has 1 hazard statement:
- H318: Causes serious eye damage.
What is the melting point of Aluminum Sulfate?
The melting point is decomposition or sublimation occur prior to or during melting and the boiling point is not determined.