NextSDS Logo
Safety Data Sheet EN

2,2,3,3-Tetramethylsuccinonitrile

CAS 3333-52-6
EC 608-859-9

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
2,2,3,3-Tetramethylsuccinonitrile
Product Code
226145
Chemical Name
TETRAMETHYLSUCCINONITRILE

Regulatory Identifiers

CAS Number
3333-52-6 Check regulations →
EC Number
608-859-9 Check regulations →

Identified Uses

For R&D use only.

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Acute Tox. Cat. 2 H300
Acute Tox. Cat. 3 H311
Acute Tox. Cat. 3 H331
STOT SE Cat. 2 H371
STOT RE Cat. 2 H373

GHS Pictograms

GHS06 - Acute toxicity

GHS06

GHS08 - Serious health hazard

GHS08

Hazard Statements

H300 Fatal if swallowed
H311 Toxic in contact with skin
H331 Toxic if inhaled
H371 May cause damage to organs
H373 Causes damage to organs through prolonged or repeated exposure

Precautionary Statements

P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.
P302 + P352 IF ON SKIN: wash with plenty of soap and water.
P304 + P340 IF INHALED: Remove victim to fresh air and Keep at rest in a position comfortable for breathing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P309 + P311 IF exposed or if you feel unwell: call a POISON CENTER or doctor/physician.
P311 Call a POISON CENTER or doctor/physician.
P314 Get medical advice/attention if you feel unwell.
P403 + P233 Store in a well-ventilated place. Keep container tightly closed.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

The data for this section has not been processed yet.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove victim from source of exposure to fresh air. If breathing is difficult, administer oxygen. Seek medical attention.

Skin contact

Wash thoroughly with soap and plenty of water. Seek medical attention.

Eye contact

Immediately flush eyes with running water for at least 15 minutes while keeping eyes open. Seek medical attention.

Ingestion

Do not induce vomiting. Give water to victim to drink. Seek medical attention.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Ensure adequate ventilation during use.

Hands

Avoid all direct contact with product. Wear chemical-resistant gloves. Wear protective clothing and boots. After contact with skin, wash immediately.

Eyes

Wear protective safety goggles or face shields tested and approved under appropriate government standards such as NIOSH (US) or EN 166 (EU).

Respiratory

Approved respiratory equipment must be used when airborne concentrations are unknown or exceed the exposure limits.

Skin/Body

Wear protective clothing and boots.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
solid
Physical State Data
solid
State Under Standard Conditions
---
Appearance
white crystalline solid
Colour
white
Colour Intensity
---
Form
crystalline solid
Odor
no data available
Odor Threshold
no data available
Ph
---
Melting Point
no data available
Boiling Point
no data available
Flash Point
no data available
Freezing Point
no data available
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
no data available
Vapor Pressure
no data available
Vapor Density
---
Relative Density
no data available
Bulk Density
---
Density
---
Flammability
no data available
Upper Explosive Limit
no data available
Lower Explosive Limit
no data available
Explosive Limits
---
Auto Ignition Temperature
no data available
Decomposition Temperature
no data available
Solubility
no data available
Partition Coefficient
no data available
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN2811
Shipping Name
Toxic solid, organic, n.o.s.
Transport Class
6.1
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for 2,2,3,3-Tetramethylsuccinonitrile?

The signal word is danger.

What is the physical form of 2,2,3,3-Tetramethylsuccinonitrile?

2,2,3,3-Tetramethylsuccinonitrile is a solid appearing as white crystalline solid with white color. It has no data available odor.

What is the solubility of 2,2,3,3-Tetramethylsuccinonitrile?

no data available

What is 2,2,3,3-Tetramethylsuccinonitrile used for?

For R&D use only.

What are the hazard statements for 2,2,3,3-Tetramethylsuccinonitrile?

This substance has 5 hazard statements:

  • H300: Fatal if swallowed
  • H311: Toxic in contact with skin
  • H331: Toxic if inhaled
  • H371: May cause damage to organs
  • H373: Causes damage to organs through prolonged or repeated exposure

What is the melting point of 2,2,3,3-Tetramethylsuccinonitrile?

The melting point is no data available and the boiling point is no data available.