NextSDS Logo
Safety Data Sheet EN

o-Terphenyl

CAS 84-15-1
EC 201-517-6

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
o-Terphenyl
Product Code
L11710
Chemical Name
o-terphenyl

Regulatory Identifiers

CAS Number
84-15-1 Check regulations →
EC Number
201-517-6 Check regulations →

Identified Uses

SU24 Scientific research and development

Manufacturers & Suppliers

Alfa Aesar logo

Alfa Aesar

manufacturer

30 Bond Street, Ward Hill, MA 01835-8099

800-343-0660

http://www.alfa.com

Emergency Contacts

Emergency Contact

800-343-0660

Monday-Friday, 8am-7pm EST

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Acute Tox. Cat. 4 H302
Skin Irrit. Cat. 2 H315
Eye Irrit. Cat. 2A H319
STOT SE Cat. 3 H335

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H302 Harmful if swallowed.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.

Precautionary Statements

P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P405 Store locked up.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
N/A --- --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air. If required, provide artificial respiration. Keep patient warm.

Skin contact

Immediately wash with water and soap and rinse thoroughly.

Eye contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Ingestion

Seek medical treatment.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.

Hands

Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Penetration time of glove material (in minutes) Not determined

Eyes

Safety glasses

Respiratory

Use suitable respirator when high concentrations are present.

Skin/Body

Protective work clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Evaporation Rate
Not applicable.
Auto Ignition Temperature
Not determined.
Physical State Data
solid
Vapor Pressure
Not applicable.
Upper Explosive Limit
Not determined
Decomposition Temperature
Not determined.
Kinematic Viscosity
Not applicable.
Dynamic Viscosity
Not applicable.
Partition Coefficient
Not determined.
Colour Intensity
---
Relative Evaporation Rate
---
Crystallisation Point
---
Voc Content
---
Odor Threshold
Not determined.
Vapor Density
Not applicable.
Bulk Density
---
Softening Point
---
Solubility In Fat
---
Boiling Point
332 ℃ (630 °F)
Density
1.1 g/cm3 (9.18 lbs/gal)
Appearance
Crystalline powder
Relative Density
Not determined.
Metal Corrosion
---
Cloud Point
---
Ph
Not applicable.
Flammability
Not determined.
Colour
White
Properties Status
---
Solubility In Water
Insoluble
Explosive Limits
---
Freezing Point
---
Odor
Not determined
State Under Standard Conditions
---
Physical State
solid
Flash Point
163 °C (325 °F)
Solubility
Insoluble
Solidification Point
---
Lower Explosive Limit
Not determined
Molecular Weight
---
Form
---
Melting Point
56-58 ℃ (133-136 °F)
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN3077
Shipping Name
Environmentally hazardous substances, solid, n.o.s. (o-Terphenyl)
Transport Class
9
Packing Group
III
IMDG

Warning: Miscellaneous dangerous substances and articles

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for o-Terphenyl?

The signal word is warning.

What is the physical form of o-Terphenyl?

o-Terphenyl is a solid appearing as crystalline powder with white color. It has not determined odor.

What is the solubility of o-Terphenyl?

Insoluble

What is o-Terphenyl used for?

SU24 Scientific research and development

What are the hazard statements for o-Terphenyl?

This substance has 4 hazard statements:

  • H302: Harmful if swallowed.
  • H315: Causes skin irritation.
  • H319: Causes serious eye irritation.
  • H335: May cause respiratory irritation.

What is the melting point of o-Terphenyl?

The melting point is 56-58 ℃ (133-136 °F) and the boiling point is 332 ℃ (630 °F).

Compliance Scanner

Scan your compliance