Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- N-tert-Butyl-a-phenylnitrone
- Product Code
- 232165
Regulatory Identifiers
- CAS Number
- 3376-24-7 Check regulations →
- EC Number
- 222-168-6 Check regulations →
Identified Uses
Laboratory chemicals, Manufacture of substances
Manufacturers & Suppliers
J&K Scientific bvba
manufacturer
Louis Pasteurstraat 11 POB 103, B-3920 Lommel, Belgium
+32 (0) 11 34 03 90
J&K Scientific Ltd.
manufacturer
AEF 18/F Bldg-D Majesty Garden 6 Bei-Si-Huan-Zhong Rd. Beijing
+86 10 8284 8833
Emergency Contacts
Emergency Contact
+86 10 8284 2121
Emergency Contact
+32 (0) 11 34 03 90
Giftinformationszentrum Nord
+49 551 19240
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Chemical characterisation: Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| N-tert-Butyl-a-phenylnitrone EC: 222-168-6 | 3376-24-7 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
Immediately wash with water and soap and rinse thoroughly.
Rinse opened eye for several minutes under running water. Then consult a doctor.
Do not induce vomiting; call for medical help immediately.
Immediate Medical Attention
Consult a physician (inhalation/eye contact); call for medical help immediately (ingestion).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, Alcohol-resistant foam, Dry chemical, Carbon dioxide
During heating or in case of fire poisonous gases are produced.
Firefighter Protection
Wear self contained breathing apparatus for fire fighting if necessary.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow to enter sewers/ surface or ground water.
Soak up with inert absorbent material and dispose of as hazardous waste.
Materials: inert absorbent material
Related Products
Similar products with comparable safety profiles
N-Phenyl-1-naphthylamine
---
N-Phenyl-1-naphthylamine
CAS: 90-30-2
N-(1,3-Dimethylbutyl)-N'-phenyl-1,4-phenylenediamine
---
2-tert-Butylphenol
CAS: 88-18-6
N-Phenyl-p-phenylenediamine
CAS: 101-54-2
N-Phenyl-o-phenylenediamine
CAS: 534-85-0
4-tert-Butylphenol
CAS: 98-54-4
N-Isopropyl-N'-phenyl-p-phenylenediamine
CAS: 101-72-4
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/exhaustion at the workplace. No special precautions are necessary if used correctly. Provide appropriate exhaust ventilation at places where dust is formed
Keep container tightly closed in a dry and well-ventilated place. Keep in a cool place. Recommended storage temperature -20 ℃. Air sensitive. Heat sensitive.
Keep respiratory protective device available.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it. Full contact Material: Fluorinated rubber Minimum layer thickness: 0,7 mm Break through time: 480 min Material tested: Vitoject® (KCL 890 / Aldrich Z677698, Size M). Splash contact Material: Fluorinated rubber Minimum layer thickness: 0,7 mm Break through time: 480 min. If used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the CE approved gloves. This recommendation is advisory only and must be evaluated by an industrial hygienist and safety officer familiar with the specific situation of anticipated use by our customers.
Face shield and safety glasses. Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.
Complete suit protecting against chemicals, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No data available
No further relevant information available.
No dangerous reactions known.
Heat Air
Strong oxidizing agents
Other decomposition products - No data available
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for N-tert-Butyl-a-phenylnitrone?
The signal word is no signal word.
What is the physical form of N-tert-Butyl-a-phenylnitrone?
N-tert-Butyl-a-phenylnitrone is a solid with white color. It has no data available odor.
What is N-tert-Butyl-a-phenylnitrone used for?
Laboratory chemicals, Manufacture of substances
What is the melting point of N-tert-Butyl-a-phenylnitrone?
The melting point is 73-77 ℃ and the boiling point is Undetermined..