Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Tetramethoxysilane
- Product Code
- 14083
- Chemical Name
- Tetramethoxysilane
Regulatory Identifiers
- CAS Number
- 681-84-5 Check regulations →
- EC Number
- 211-656-4 Check regulations →
Identified Uses
SU24 Scientific research and development
Manufacturers & Suppliers
Alfa Aesar / Thermo Fisher Scientific Chemicals, Inc.
manufacturer
30 Bond Street, Ward Hill, MA 01835-8099
http://www.alfa.com
Emergency Contacts
Alfa Aesar / Thermo Fisher Scientific Chemicals, Inc.
(800) 343-0660
Monday-Friday, 8am-7pm EST
Carechem 24
(866) 928-0789
After normal business hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS05
GHS06
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Tetramethoxysilane EC: 211-656-4 | 681-84-5 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air. If required, provide artificial respiration. Keep patient warm. Seek immediate medical advice.
Immediately wash with water and soap and rinse thoroughly. Seek immediate medical advice.
Rinse opened eye for several minutes under running water. Then consult a doctor.
Seek medical treatment.
Immediate Medical Attention
Seek immediate medical advice.
Medical Treatment
Seek medical treatment.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use carbon dioxide, extinguishing powder or foam. Water may be ineffective but may be used for cooling exposed containers.
If this product is involved in a fire, the following can be released: Carbon monoxide and carbon dioxide, Silicon oxide
Firefighter Protection
Wear self-contained respirator. Wear fully protective impervious suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away.
Do not allow material to be released to the environment without proper governmental permits.
Absorb with liquid-binding material
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Tetraethoxysilane
CAS: 78-10-4
Triethoxysilane
CAS: 998-30-1
Chlorotrimethylsilane
CAS: 75-77-4
Dimethyldichlorosilane
CAS: 75-78-5
Octamethylcyclotetrasiloxane
CAS: 556-67-2
Trichloro(methyl)silane
CAS: 75-79-6
Trichlorosilane
CAS: 10025-78-2
Poly(dimethylsiloxane) Hexamethyldisiloxane
CAS: 107-46-0
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle under dry protective gas. Keep container tightly sealed. Open and handle container with care. Prevent formation of aerosols.
Store in cool, dry place in tightly closed containers. Store under dry inert gas. Protect from humidity and water.
Protect against electrostatic charges. Keep ignition sources away.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.
Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Penetration time of glove material (in minutes) Not determined
Tightly sealed goggles
Use self-contained respiratory protective device in emergency situations.
Protective work clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
No information known.
No dangerous reactions known
No further relevant information available.
Oxidizing agents, Water/moisture
Carbon monoxide and carbon dioxide, Silicon oxide
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Consult state, local or national regulations to ensure proper disposal.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN2606
- Shipping Name
- Methyl orthosilicate
- Transport Class
- 6.1
- Packing Group
- I
Warning: Toxic substances
Warning: Toxic substances
Warning: Toxic substances
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Tetramethoxysilane?
The signal word is danger.
What is the physical form of Tetramethoxysilane?
Tetramethoxysilane is a liquid appearing as liquid with colorless color. It has not determined odor.
What is the solubility of Tetramethoxysilane?
Hydrolyzes
What is Tetramethoxysilane used for?
SU24 Scientific research and development
What are the hazard statements for Tetramethoxysilane?
This substance has 5 hazard statements:
- H226: Flammable liquid and vapour.
- H315: Causes skin irritation.
- H318: Causes serious eye damage.
- H330: Fatal if inhaled.
- H335: May cause respiratory irritation.
What is the melting point of Tetramethoxysilane?
The melting point is 4-5 °C (39-41 °F) and the boiling point is 121-122 °C (250-252 °F).