Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Membrane filter, 0.22 micron nitrocellulose / Ø 47 mm
- Product Code
- A009
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- Mixture - Registration numbers of the components, see Chapter 3
Identified Uses
Auxiliary
Manufacturers & Suppliers
Carl Roth GmbH + Co.KG
manufacturer
Schoemperlenstraße 3-5, 76185 Karlsruhe, Germany
+49/(0)721 5606-0
Emergency Contacts
Poison Centre Munich
+49/(0)89 19240
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Nitrocellulose | 9004-70-0 | 50 - 100% | Yes |
For the wording of the listed risk phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
No special measures required.
Ingestion is unlikely to occur.
Immediate Medical Attention
No further relevant information available.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Filter aid, Celite® 503
CAS: 61790-53-2
Molecular sieve 0.3 nm
---
LCK 339 Nitrat/Nitrate, Sample cuvette, 1/2
---
LCK 341 Nitrit/Nitrite, Sample cuvette; 1/2
---
Silica gel 60 (0.063-0.200 mm) for column chromatography (70-230 mesh ASTM)
CAS: 7631-86-9
Silica gel FIA coarse 0,071-0,63 mm, 1
---
Filter aid, Harborlite 800
CAS: 93763-70-3
Molsiv Adsorbents 13X HP 10x20
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Material of gloves: Nitrile, thickness: ≥ 0.11 mm. Penetration time of glove material: Value for the permeation: Level ≥ 6. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed. As protection from splashes gloves made of the following materials are suitable: Nitrile rubber, thickness: ≥ 0.11 mm. Value for the permeation: Level ≥ 6.
Tightly sealed goggles
Filter P1 (colour code: white). Required when dusts are generated.
Protective work clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3270
- Shipping Name
- NITROCELLULOSE MEMBRANE FILTER
- Transport Class
- 4.1 Flammable solids, self-reactive substances and solid desensitised explosives.
- Packing Group
- II
Warning: Flammable solids, self-reactive substances and solid desensitised explosives.
Warning: Flammable solids, self-reactive substances and solid desensitised explosives.
Warning: Flammable solids, self-reactive substances and solid desensitised explosives.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Membrane filter, 0.22 micron nitrocellulose / Ø 47 mm?
The signal word is danger.
What is the physical form of Membrane filter, 0.22 micron nitrocellulose / Ø 47 mm?
Membrane filter, 0.22 micron nitrocellulose / Ø 47 mm is a solid with white color. It has characteristic odor.
What is Membrane filter, 0.22 micron nitrocellulose / Ø 47 mm used for?
Auxiliary
What are the hazard statements for Membrane filter, 0.22 micron nitrocellulose / Ø 47 mm?
This substance has 1 hazard statement:
- H228: Flammable solid.
What is the melting point of Membrane filter, 0.22 micron nitrocellulose / Ø 47 mm?
The melting point is Undetermined. and the boiling point is Undetermined..