NextSDS Logo
Safety Data Sheet EN

n-Hexyl acrylate

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
n-Hexyl acrylate
Product Code
L09905

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

Alfa Aesar, A Johnson Matthey Company logo

Alfa Aesar, A Johnson Matthey Company

manufacturer

30 Bond Street, Ward Hill, MA 01835-8099

http://www.alfa.com

Emergency Contacts

Health, Safety and Environmental Department

(978) 521-6300

CHEMTREC

(800) 424-9300

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Irrit. Cat. 2
Eye Irrit. Cat. 2A
Skin Sens. Cat. 1
STOT SE Cat. 3
Flam. Liq. Cat. 4
Aquatic Chronic Cat. 2

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS09 - Environmental hazard

GHS09

Hazard Statements

H227 Combustible liquid.
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
H411 Toxic to aquatic life with long lasting effects.

Precautionary Statements

P210 Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P264 Wash thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P272 Contaminated work clothing should not be allowed out of the workplace.
P273 Avoid release to the environment.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P304 + P312 Call a POISON CENTER or doctor/physician if you feel unwell.
P304 + P341 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P321 Specific treatment (see on this label).
P332 + P313 If skin irritation occurs: Get medical advice/attention.
P333 + P313 If skin irritation or rash occurs: Get medical advice/attention.
P337 + P313 If eye irritation persists: Get medical advice/attention.
P362 + P364 Take off contaminated clothing and wash before reuse.
P363 Wash contaminated clothing before reuse.
P370 + P378 In case of fire: Use for extinction: CO2, powder or water spray.
P391 Collect spillage.
P403 + P233 Store in a well-ventilated place. Keep container tightly closed.
P403 + P235 Store in a well-ventilated place. Keep cool.
P405 Store locked up.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
n-Hexyl acrylate EC: 219-698-5 2499-95-8 100% No
Hydroquinone --- --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air and to be sure call for a doctor. Supply fresh air. If required, provide artificial respiration. Keep patient warm.

Skin contact

Immediately wash with water and soap and rinse thoroughly.

Eye contact

Rinse opened eye for several minutes under running water.

Ingestion

Seek immediate medical advice.

Immediate Medical Attention

Seek immediate medical advice.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Carbon dioxide, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.

Specific hazards

In case of fire, the following can be released: Carbon monoxide and carbon dioxide

Firefighter Protection

Wear self-contained respirator. Wear fully protective impervious suit.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Wear protective equipment. Keep unprotected persons away. Ensure adequate ventilation.

Environmental

Do not allow material to be released to the environment without proper governmental permits.

Cleanup methods

Absorb with liquid-binding material

Materials: sand, diatomite, acid binders, universal binders, sawdust

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Keep container tightly sealed.

Storage

Store in cool, dry place in tightly closed containers.

Fire prevention

Keep ignition sources away.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.

Hands

Impervious gloves. Check protective gloves prior to each use for their proper condition. Material of gloves: The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer.

Eyes

Safety glasses

Respiratory

Use suitable respirator when high concentrations are present.

Skin/Body

Protective work clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Colorless
Colour Intensity
---
Form
Liquid
Odor
Not determined
Odor Threshold
---
Ph
---
Melting Point
-45°C (-49°F)
Boiling Point
88-89°C (190-192°F) (24 mmHg)
Flash Point
68°C (154°F)
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
Not determined
Vapor Density
---
Relative Density
---
Bulk Density
---
Density
0.89 g/cm³
Flammability
---
Upper Explosive Limit
Not determined
Lower Explosive Limit
Not determined
Explosive Limits
---
Auto Ignition Temperature
Not determined
Decomposition Temperature
Not determined
Solubility
Not miscible or difficult to mix
Partition Coefficient
---
Solubility In Water
Not miscible or difficult to mix
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Decomposition will not occur if used and stored according to specifications.

Hazardous reactions

No dangerous reactions known

Avoid

Decomposition will not occur if used and stored according to specifications.

Incompatible

Oxidizing agents

Decomposition

Carbon monoxide and carbon dioxide

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Disposal

Consult state, local or national regulations to ensure proper disposal.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
3082
Shipping Name
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (n-Hexyl acrylate)
Transport Class
9
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Chemical Safety Assessment Not performed

For use only by technically qualified individuals.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for n-Hexyl acrylate?

The signal word is warning.

What is the physical form of n-Hexyl acrylate?

n-Hexyl acrylate is a liquid with colorless color. It has not determined odor.

What is the solubility of n-Hexyl acrylate?

Not miscible or difficult to mix

What are the hazard statements for n-Hexyl acrylate?

This substance has 6 hazard statements:

  • H227: Combustible liquid.
  • H315: Causes skin irritation.
  • H317: May cause an allergic skin reaction.
  • H319: Causes serious eye irritation.
  • H335: May cause respiratory irritation.
  • H411: Toxic to aquatic life with long lasting effects.

What is the melting point of n-Hexyl acrylate?

The melting point is -45°C (-49°F) and the boiling point is 88-89°C (190-192°F) (24 mmHg).