NextSDS Logo
Safety Data Sheet EN

N,N'-Diphenyl-p-phenylenediamine

CAS 74-31-7
EC 200-806-4

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
N,N'-Diphenyl-p-phenylenediamine
Product Code
B23713
Chemical Name
N,N'-Diphenyl-p-phenylenediamine

Regulatory Identifiers

CAS Number
74-31-7 Check regulations →
EC Number
200-806-4 Check regulations →

Identified Uses

SU24 Scientific research and development

Manufacturers & Suppliers

Alfa Aesar Thermo Fisher Scientific Chemicals, Inc. logo

Alfa Aesar Thermo Fisher Scientific Chemicals, Inc.

manufacturer

30 Bond Street, Ward Hill, MA 01835-8099

800-343-0660

http://www.alfa.com

Emergency Contacts

Emergency Contact

800-343-0660

Monday-Friday, 8am-7pm EST

Carechem 24

866-928-0789

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Sens. Cat. 1 H317

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H317 May cause an allergic skin reaction.

Precautionary Statements

P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P321 Specific treatment (see on this label).
P333+P313 If skin irritation or rash occurs: Get medical advice/attention.
P363 Wash contaminated clothing before reuse.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
N,N'-Diphenyl-p-phenylenediamine EC: 200-806-4 74-31-7 --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air. If required, provide artificial respiration. Keep patient warm.

Skin contact

Immediately wash with water and soap and rinse thoroughly. Seek immediate medical advice.

Eye contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Ingestion

Seek medical treatment.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.

Hands

Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Penetration time of glove material (in minutes) Not determined.

Eyes

Safety glasses

Respiratory

Use suitable respirator when high concentrations are present.

Skin/Body

Protective work clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Bulk Density
---
Cloud Point
---
Crystallisation Point
---
Relative Density
Not determined.
State Under Standard Conditions
---
Softening Point
---
Colour Intensity
---
Auto Ignition Temperature
Not determined.
Kinematic Viscosity
Not applicable.
Solubility In Fat
---
Relative Evaporation Rate
---
Decomposition Temperature
Not determined
Melting Point
146-153 ℃ (295-307 °F)
Partition Coefficient
Not determined.
Odor Threshold
Not determined.
Physical State Data
solid
Colour
Grey or brown
Lower Explosive Limit
Not determined
Explosive Limits
---
Odor
Not determined
Physical State
---
Vapor Density
Not applicable.
Evaporation Rate
Not applicable.
Solubility
---
Solidification Point
---
Properties Status
---
Form
Powder or flakes
Flash Point
---
Solubility In Water
Not determined
Vapor Pressure
Not applicable.
Voc Content
---
Metal Corrosion
---
Boiling Point
220-225 ℃ (428-437 °F) (1mm Hg)
Freezing Point
---
Ph
Not applicable.
Upper Explosive Limit
Not determined
Dynamic Viscosity
Not applicable.
Flammability
Not determined.
Molecular Weight
---
Density
1.28 g/cm3 (10.682 lbs/gal)
Appearance
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for N,N'-Diphenyl-p-phenylenediamine?

The signal word is warning.

What is N,N'-Diphenyl-p-phenylenediamine used for?

SU24 Scientific research and development

What are the hazard statements for N,N'-Diphenyl-p-phenylenediamine?

This substance has 1 hazard statement:

  • H317: May cause an allergic skin reaction.

What is the melting point of N,N'-Diphenyl-p-phenylenediamine?

The melting point is 146-153 ℃ (295-307 °F) and the boiling point is 220-225 ℃ (428-437 °F) (1mm Hg).

Compliance Scanner

Scan your compliance