Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Ethylene glycol dimethacrylate
- Product Code
- 44151
Regulatory Identifiers
- CAS Number
- 97-90-5 Check regulations →
- EC Number
- 202-617-2 Check regulations →
Identified Uses
SU24 Scientific research and development
Manufacturers & Suppliers
Alfa Aesar, Thermo Fisher Scientific Chemicals, Inc.
manufacturer
30 Bond Street, Ward Hill, MA 01835-8099
800-343-0660
http://www.alfa.com
Emergency Contacts
Emergency Contact
(800) 343-0660
Monday-Friday, 8am-7pm EST
Carechem 24
(866) 928-0789
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ethylene glycol dimethacrylate EC: 202-617-2 | 97-90-5 | 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air. If required, provide artificial respiration. Keep patient warm.
Immediately wash with water and soap and rinse thoroughly.
Rinse opened eye for several minutes under running water. Then consult a doctor.
Seek medical treatment.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
If this product is involved in a fire, the following can be released: Carbon monoxide and carbon dioxide
Firefighter Protection
Wear self-contained respirator. Wear fully protective impervious suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away.
Do not allow product to reach sewage system or any water course.
Absorb with liquid-binding material
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Ethylene glycol dimethacrylate
CAS: 97-90-5
Ethylene glycol diacrylate
CAS: 2274-11-5
Ethylene glycol dimethyl ether
CAS: 110-71-4
Ethylene glycol
CAS: 107-21-1
Ethylene glycol
CAS: 107-21-1
Ethylene glycol diethyl ether
CAS: 629-14-1
Ethylene glycol monopropyl ether
CAS: 2807-30-9
Poly(ethylene glycol) diacrylate
CAS: 26570-48-9
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep container tightly sealed.
Refrigerate, keep container tightly sealed.
No information known.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.
Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Penetration time of glove material (in minutes) Not determined
Safety glasses with side shields / NIOSH (US) or EN 166(EU)
Use suitable respirator when high concentrations are present. Recommended filter device for short term use: Use a respirator with multi-purpose combination (US) or type ABEK (EN 14387) as a backup to engineering controls. Risk assessment should be performed to determine if air-purifying respirators are appropriate. Only use equipment tested and approved under appropriate government standards such as NIOSH (USA) or CEN (EU).
Protective work clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
Toxicity
No further relevant information available regarding aquatic toxicity.
Persistence and degradability
No further relevant information available.
Bioaccumulative potential
No further relevant information available.
12.4 Mobility in soil
No further relevant information available.
Results of PBT and vPvB assessment
The substance is not considered to be PBT or vPvB.
Other adverse effects
No further relevant information available.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- Shipping Name
- Not applicable
- Transport Class
- Not applicable
- Packing Group
- Not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The product is classified and labeled in accordance with 29 CFR 1910 (OSHA HCS)
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Ethylene glycol dimethacrylate?
The signal word is warning.
What is the physical form of Ethylene glycol dimethacrylate?
Ethylene glycol dimethacrylate is a liquid appearing as not determined . It has not determined odor.
What is the solubility of Ethylene glycol dimethacrylate?
Not determined
What is Ethylene glycol dimethacrylate used for?
SU24 Scientific research and development
What are the hazard statements for Ethylene glycol dimethacrylate?
This substance has 2 hazard statements:
- H317: May cause an allergic skin reaction.
- H335: May cause respiratory irritation.
What is the melting point of Ethylene glycol dimethacrylate?
The melting point is Not determined and the boiling point is 83-85 ℃ (181-185 °F) (1mm).