Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
European Community number - used for regulatory compliance in EU/EEA
Uses Information
Overview
2-Furaldehyde (CAS: 98-01-1 ) commonly used su24 scientific research and development.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS02
GHS07
GHS08
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H226: Flammable liquid and vapour.
- H301 + H331: Toxic if swallowed or if inhaled.
- H312: Harmful in contact with skin.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H335: May cause respiratory irritation.
- H351: Suspected of causing cancer.
Precautionary Statements
- P201: Obtain special instructions before use.
- P210: Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
- P261: Avoid breathing dust/fume/gas/mist/vapours/spray.
- P280: Wear protective gloves/protective clothing/eye protection/face protection.
- P281: Use personal protective equipment as required.
- P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
- P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
- P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P405: Store locked up.
- P501: Dispose of contents/container in accordance with local/regional/national/international regulations.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
Alfa Aesar Thermo Fisher Scientific Chemicals, Inc.
manufacturer
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Emergency Contact
(800) 343-0660
During normal business hours (Monday-Friday, 8am-7pm EST)
Carechem 24
(866) 928-0789
After normal business hours
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
substanceChemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| a-Furole EC: 202-627-7 | 98-01-1 | Not specified | ✓ Non-hazardous |
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Supply fresh air. If required, provide artificial respiration. Keep patient warm. Seek immediate medical advice.
Symptoms:
Toxic if inhaled. May cause respiratory irritation.
🖐️ Skin Contact
Immediately wash with water and soap and rinse thoroughly. Seek immediate medical advice.
Symptoms:
Causes skin irritation. Harmful in contact with skin.
👁️ Eye Contact
Rinse opened eye for several minutes under running water. Then consult a doctor.
Symptoms:
Causes serious eye irritation.
🍽️ Ingestion/Swallowing
Do not induce vomiting; immediately call for medical help.
Symptoms:
Toxic if swallowed.
🚨 Immediate Medical Attention Required
No further relevant information available.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.
🧤 Hand Protection
Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Material of gloves Butyl rubber, BR. Penetration time of glove material (in minutes) 480. Glove thickness 0.3 mm.
👁️ Eye Protection
Safety glasses.
😷 Respiratory Protection
Use self-contained respiratory protective device in emergency situations. Recommended filter device for short term use: Use a respirator with multi-purpose combination (US) or type ABEK (EN 14387) as a backup to engineering controls. Risk assessment should be performed to determine if air-purifying respirators are appropriate. Only use equipment tested and approved under appropriate government standards such as NIOSH (USA) or CEN (EU).
🦺 Skin/Body Protection
Protective work clothing.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
UN1199
📦 Proper Shipping Name
Furaldehydes
⚠️ Transport Hazard Class
6.1
📋 Packing Group
II
🚢 IMDG Maritime Transport Precautions
Warning: Toxic substances F-E,S-Ď
✈️ IATA Air Transport Precautions
Warning: Toxic substances F-E,S-Ď
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What other names is 2-Furaldehyde known by?
2-Furaldehyde is also known as: 2-Furaldehyde
What is the hazard signal word for 2-Furaldehyde?
The signal word for this substance is "danger".
What is the physical form of 2-Furaldehyde?
2-Furaldehyde is a liquid . It has almond-like odor.
What is 2-Furaldehyde used for?
SU24 Scientific research and development
What are the hazard statements for 2-Furaldehyde?
This substance has 7 hazard statements: H226: Flammable liquid and vapour. H301 + H331: Toxic if swallowed or if inhaled. H312: Harmful in contact with skin. H315: Causes skin irritation. H319: Causes serious eye irritation. H335: May cause respiratory irritation. H351: Suspected of causing cancer.
What is the melting point of 2-Furaldehyde?
The melting point is -38 °C (-36 °F) and the boiling point is 162 °C (324 °F).