NextSDS Logo
Safety Data Sheet EN

1-Propanethiol

CAS 107-03-9
EC 203-455-5

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
1-Propanethiol
Product Code
43420
Chemical Name
1-Propanethiol

Regulatory Identifiers

CAS Number
107-03-9 Check regulations →
EC Number
203-455-5 Check regulations →

Identified Uses

SU24 Scientific research and development

Manufacturers & Suppliers

Alfa Aesar logo

Alfa Aesar

manufacturer

30 Bond Street Ward Hill, MA 01835-8099

www.alfa.com

Emergency Contacts

Alfa Aesar

(800) 343-0660

Monday-Friday, 8am-7pm EST

Carechem 24

(866) 928-0789

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 2 H225
Eye Dam. Cat. 1 H318
Acute Tox. Cat. 4 H302
Skin Irrit. Cat. 2 H315
STOT SE Cat. 3 H335

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

GHS05 - Corrosive

GHS05

Hazard Statements

H225 Highly flammable liquid and vapor.
H302 Harmful if swallowed.
H315 Causes skin irritation.
H318 Causes serious eye damage.
H335 May cause respiratory irritation.

Precautionary Statements

P210 Keep away from heat/sparks/open flames/hot surfaces. No smoking.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P273 Avoid release to the environment.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P403 Store in a well-ventilated place.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance

Substances

Chemical Name CAS Number Concentration Hazardous
N/A --- --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air. If required, provide artificial respiration. Keep patient warm.

Skin contact

Immediately wash with water and soap and rinse thoroughly.

Eye contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Ingestion

Seek medical treatment.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.

Hands

Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer.

Eyes

Tightly sealed goggles

Respiratory

Use suitable respirator when high concentrations are present.

Skin/Body

Protective work clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Vapor Pressure
162.26 hPa (122 mm Hg)
Partition Coefficient
Not determined.
Solidification Point
---
Flash Point
-20 °℃ (-4 °F)
Molecular Weight
---
Bulk Density
---
Appearance
Colorless
Form
Liquid
Relative Evaporation Rate
---
Ph
Not determined.
Colour
Colorless
Melting Point
-113 °℃ (-171 ºF)
Decomposition Temperature
Not determined.
Lower Explosive Limit
Not determined
Boiling Point
66-68 ℃ (151-154 °F)
Freezing Point
---
Odor
Stench
Evaporation Rate
Not determined.
Solubility
---
Colour Intensity
---
Odor Threshold
Not determined.
Vapor Density
Not determined.
Density
0.841 g/cm3 (7.018 lbs/gal)
Physical State
Liquid
Explosive Limits
---
Kinematic Viscosity
Not determined.
Relative Density
Not determined.
Dynamic Viscosity
0.399 mPas
Physical State Data
liquid
Solubility In Water
1.9 g/l
Cloud Point
---
Crystallisation Point
---
Flammability
Not determined.
Voc Content
---
Softening Point
---
Auto Ignition Temperature
Not determined.
Properties Status
---
Solubility In Fat
---
State Under Standard Conditions
---
Metal Corrosion
---
Upper Explosive Limit
Not determined
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN2402
Shipping Name
PROPANETHIOLS
Transport Class
8
Packing Group
II
IMDG

Warning: Flammable liquids

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for 1-Propanethiol?

The signal word is danger.

What is the physical form of 1-Propanethiol?

1-Propanethiol is a liquid appearing as colorless with colorless color. It has stench odor.

What is 1-Propanethiol used for?

SU24 Scientific research and development

What are the hazard statements for 1-Propanethiol?

This substance has 5 hazard statements:

  • H225: Highly flammable liquid and vapor.
  • H302: Harmful if swallowed.
  • H315: Causes skin irritation.
  • H318: Causes serious eye damage.
  • H335: May cause respiratory irritation.

What is the melting point of 1-Propanethiol?

The melting point is -113 °℃ (-171 ºF) and the boiling point is 66-68 ℃ (151-154 °F).

Compliance Scanner

Scan your compliance