Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 2-Propanethiol
- Product Code
- P0489
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Reagents.
Manufacturers & Suppliers
TCI EUROPE N.V.
Boerenveldseweg 6, Haven 1063, B-2070 Zwijndrecht
+32(0)3 735 07 00
Emergency Contacts
Emergency Contact
+32(0)70 245 245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2-Propanethiol EC: 200-861-4 | 75-33-2 | 96% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove victim to fresh air and keep at rest in a position comfortable for breathing. Get medical advice/attention if you feel unwell.
Remove/Take off immediately all contaminated clothing. Gently wash with plenty of soap and water. If skin irritation or rash occurs: Get medical advice/attention.
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
Get medical advice/attention if you feel unwell. Rinse mouth.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry chemical, foam, carbon dioxide.
Water (It may scatter and spread fire.)
Take care as it may decompose upon combustion or in high temperatures to generate poisonous fume.
Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. In case of fire in the surroundings: Keep containers cool by spraying with water. Eliminate all ignition sources if safe to do so.
Firefighter Protection
When extinguishing fire, be sure to wear personal protective equipment
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Keep people away from and upwind of spill/leak. Ensure adequate ventilation. Entry to non-involved personnel should be controlled around the leakage area by roping off, etc
contain a spill by bunding
Prevent product from entering drains
Absorb spilled material in dry sand or inert absorbent before recovering it into an airtight container.
Materials: dry sand or inert absorbent
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handling is performed in a well ventilated place. Wear suitable protective equipment. Prevent generation of vapour or mist. Keep away from heat/sparks/open flame/hot surfaces. -No smoking. Take measures to prevent the build up of electrostatic charge. Use explosion-proof equipment. Wash hands and face thoroughly after handling. Use a closed system if possible. Use a ventilation, local exhaust if vapour or aerosol will be generated. Avoid contact with skin, eyes and clothing.
Keep container tightly closed. Store in a cool, dark and well-ventilated place.
Wash hands and face thoroughly after handling.
Keep away from heat/sparks/open flame/hot surfaces. -No smoking. Take measures to prevent the build up of electrostatic charge.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Install a closed system or local exhaust.
Protective gloves.
Safety glasses. A face-shield, if the situation requires.
Vapor respirator. Follow local and national regulations.
Protective clothing. Protective boots, if the situation requires.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under proper conditions.
No data available
No special reactivity has been reported.
Spark, Open flame, Static discharge
Oxidizing agents, Strong bases
Carbon dioxide, Carbon monoxide, Sulfur oxides
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 2402
- Shipping Name
- Propanethiols
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 2-Propanethiol?
The signal word is danger.
What is the physical form of 2-Propanethiol?
2-Propanethiol is a liquid appearing as clear with colorless - almost colorless color. It has no data available odor.
What is 2-Propanethiol used for?
Reagents.
What are the hazard statements for 2-Propanethiol?
This substance has 3 hazard statements:
- H225: Highly flammable liquid and vapour.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
What is the melting point of 2-Propanethiol?
The melting point is -130°C and the boiling point is 53°C.