NextSDS Logo
Safety Data Sheet EN

Methyl Yellow

CAS 60-11-7
EC 200-455-7

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Methyl Yellow
Product Code
B21145
Chemical Name
p-Dimethylaminoazobenzeen
Synonyms
Solvent Yellow 2

Regulatory Identifiers

CAS Number
60-11-7 Check regulations →
EC Number
200-455-7 Check regulations →

Identified Uses

SU24 Scientific research and development

Manufacturers & Suppliers

Alfa Aesar Thermo Fisher Scientific Chemicals, Inc. logo

Alfa Aesar Thermo Fisher Scientific Chemicals, Inc.

manufacturer

30 Bond Street, Ward Hill, MA 01835-8099

800-343-0660

http://www.alfa.com

Emergency Contacts

Emergency Contact

(800) 343-0660

Monday-Friday, 8am-7pm EST

Carechem 24

(866) 928-0789

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Acute Tox. Cat. 3 H301
Carc. Cat. 2 H351

GHS Pictograms

GHS06 - Acute toxicity

GHS06

GHS08 - Serious health hazard

GHS08

Hazard Statements

H301 Toxic if swallowed.
H351 Suspected of causing cancer.

Precautionary Statements

P281 Use personal protective equipment as required.
P301+P310 IF SWALLOWED: Immediately call a POISON CENTER/ doctor/ ...
P308+P313 IF exposed or concerned: Get medical advice/attention.
P321 Specific treatment (see on this label).
P405 Store locked up.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance

Chemical characterization: Substances

Chemical Name CAS Number Concentration Hazardous
p-Dimethylaminoazobenzeen EC: 200-455-7 60-11-7 --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air. If required, provide artificial respiration. Keep patient warm. Seek immediate medical advice.

Skin contact

Immediately wash with water and soap and rinse thoroughly. Seek immediate medical advice.

Eye contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Ingestion

Do not induce vomiting; immediately call for medical help.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.

Hands

Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer.

Eyes

Safety glasses

Respiratory

Use suitable respirator when high concentrations are present.

Skin/Body

Protective work clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Explosive Limits
---
Softening Point
---
Auto Ignition Temperature
Not determined.
Boiling Point
Not determined
Crystallisation Point
---
Flammability
Not determined.
Melting Point
112-116 °C (234-241 ºF)
Colour Intensity
---
Cloud Point
---
Partition Coefficient
Not determined.
Evaporation Rate
Not applicable.
Voc Content
---
Bulk Density
---
Appearance
---
Solubility In Fat
---
Properties Status
---
Vapor Pressure
Not applicable.
Relative Density
Not determined.
Kinematic Viscosity
Not applicable.
Ph
Not applicable.
Solidification Point
---
Freezing Point
---
State Under Standard Conditions
---
Metal Corrosion
---
Odor Threshold
Not determined.
Colour
Orange
Odor
Odorless
Flash Point
Not applicable
Lower Explosive Limit
Not determined
Relative Evaporation Rate
---
Solubility In Water
Insoluble
Upper Explosive Limit
Not determined
Vapor Density
Not applicable.
Decomposition Temperature
Not determined
Density
Not determined
Physical State
Powder
Dynamic Viscosity
Not applicable.
Physical State Data
solid
Molecular Weight
---
Solubility
Insoluble
Form
Powder
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN2811
Shipping Name
Toxic solids, organic, n.o.s. (Methyl Yellow)
Transport Class
6.1
Packing Group
III
ADR

Warning: Toxic substances

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is Methyl Yellow known by?

Methyl Yellow is also known as: Solvent Yellow 2

What is the hazard signal word for Methyl Yellow?

The signal word is danger.

What is the physical form of Methyl Yellow?

Methyl Yellow is a powder with orange color. It has odorless odor.

What is the solubility of Methyl Yellow?

Insoluble

What is Methyl Yellow used for?

SU24 Scientific research and development

What are the hazard statements for Methyl Yellow?

This substance has 2 hazard statements:

  • H301: Toxic if swallowed.
  • H351: Suspected of causing cancer.

What is the melting point of Methyl Yellow?

The melting point is 112-116 °C (234-241 ºF) and the boiling point is Not determined.

Compliance Scanner

Scan your compliance