Vertex Implacryl, Vertex Regular, Vertex Rapid Simplified, Vertex BasiQ20, Holland Dental Implacryl, Holland Dental Rapid Simplified

Remove person to fresh air and keep comfortable for breathing. Call a poison center or a doctor if you feel unwell.

Symptoms: May cause respiratory irritation.

Rinse skin with water/shower. Take off immediately all contaminated clothing. If skin irritation or rash occurs: Get medical advice/attention. Wash contaminated clothing before reuse.

Symptoms: Irritation. May cause an allergic skin reaction. Causes skin irritation.

Rinse immediately with plenty of water. Obtain medical attention if pain, blinking or redness persists.

Symptoms: Pain, blinking or redness.

Call a poison center or a doctor if you feel unwell. Rinse mouth. Do NOT induce vomiting.

Water spray. Dry powder. Foam. Carbon dioxide. Sand.

Do not use a heavy water stream.

Highly flammable liquid and vapour. May form flammable/explosive vapour-air mixture.

Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire.

Ventilate spillage area. No open flames, no sparks, and no smoking. Avoid breathing dust/fume/gas/mist/vapours/spray. Avoid contact with skin and eyes. Evacuate unnecessary personnel.

Prevent entry to sewers and public waters.

Take up liquid spill into absorbent material. Collect spillage.

Materials: absorbent material

Handle empty containers with care because residual vapours are flammable. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Ground/bond container and receiving equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Flammable vapours may accumulate in the container. Wear personal protective equipment. Use only outdoors or in a well-ventilated area. Avoid breathing dust/fume/gas/mist/vapours/spray. Avoid contact with skin and eyes. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Provide good ventilation in process area to prevent formation of vapour. No open flames. No smoking.

Keep only in the original container in a cool well ventilated place. Keep container tightly closed. Store locked up. Keep in fireproof place.

Wash contaminated clothing before reuse. Contaminated work clothing should not be allowed out of the workplace. Do not eat, drink or smoke when using this product. Always wash hands after handling the product.

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Ground/bond container and receiving equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Keep in fireproof place.

Ensure good ventilation of the work station.

Wear suitable gloves tested to EN374. Recommendation: Wear suitable gloves resistant to chemical penetration. Choosing the proper glove is a decision that depends not only on the type of material, but also on other quality features, which differ for each manufacturer. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed. Gloves must be replaced after each use and whenever signs of wear or perforation appear. Suitable material: butyl rubber. Layer thickness: 0.3 mm. penetration time (maximum wearing period): 60 min. If there is a risk of liquid being splashed: Nitrile rubber gloves Incidental. Thickness of glove material: 0.11 mm

Wear eye glasses with side protection according to EN 166.

No respiratory protection needed under normal use conditions. When exposure limit values are exceeded: use respirators with filtertype A (organic gases ans vapours). Use half masks (approved to EN 405) of full face masks (approved to EN 136).

Wear suitable protective clothing. Standard. EN 13034

Avoid release to the environment.

Stable under normal conditions. Highly flammable liquid and vapour. May form flammable/explosive vapour-air mixture.

Highly flammable liquid and vapour.

No dangerous reactions known under normal conditions of use.

Avoid contact with hot surfaces. Heat. No flames, no sparks. Eliminate all sources of ignition. Direct sunlight. Extremely high or low temperatures. Open flame.

Strong acids. Strong bases.

fume. Carbon monoxide. Carbon dioxide. May release flammable gases. Under normal conditions of storage and use, hazardous decomposition products should not be produced.

Dispose of contents/container in accordance with licensed collector's sorting instructions.

Dispose in a safe manner in accordance with local/national regulations.

F1

386

A209