Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Basta Pro
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
crop protection product, herbicide
Manufacturers & Suppliers
BASF Japan Ltd.
manufacturer
OVOL Nihonbashi Building 3F, 3-4-4 Nihonbashi Muromachi, Chuo-ku, Tokyo, 103-0022, JAPAN
+81-3-5290-3000
Emergency Contacts
Emergency Contact
03-6634-2245
Emergency Contact
+49 180 2273-112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS08
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
crop protection product, herbicide
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Butanoic acid, 2-amino-4-(hydroxymethylphosphinyl)-, monoammonium salt | 77182-82-2 | 18.5% | Yes |
| Alcohols, C10-16, ethoxylated, sulfates, sodium salts (> 1 < 2.5 mol EO) | 68585-34-2 | 15 - 25% | Yes |
| 2-Propanol, 1-methoxy- | 107-98-2 | 5 - 15% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Keep patient calm, remove to fresh air, seek medical attention.
Immediately wash thoroughly with plenty of water, apply sterile dressings, consult a skin specialist.
Immediately wash affected eyes for at least 15 minutes under running water with eyelids held open, consult an eye specialist.
Immediately rinse mouth and then drink 200-300 ml of water, seek medical attention. Do not induce vomiting.
Medical Treatment
Treat according to symptoms (decontamination, vital functions), no known specific antidote. Administer activated charcoal. If necessary, give oxygen. Monitor respiratory, cardiac and central nervous system.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
water spray, dry powder, foam, carbon dioxide
water jet
carbon monoxide, carbon dioxide, nitrogen oxides, sulfur oxides, silica compounds, Phosphorus compounds. The substances/groups of substances mentioned can be released in case of fire.
Keep containers cool by spraying with water if exposed to fire. In case of fire and/or explosion do not breathe fumes.
Firefighter Protection
Wear self-contained breathing apparatus and chemical-protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not breathe vapour/spray. Use personal protective clothing. Avoid contact with the skin, eyes and clothing.
Pick up with suitable absorbent material (e.g. sand, sawdust, general-purpose binder, kieselguhr).
Dike spillage. Pump off product.
Do not discharge into the subsoil/soil. Do not discharge into drains/surface waters/groundwater.
Pick up with suitable absorbent material (e.g. sand, sawdust, general-purpose binder, kieselguhr). Pump off product.
Materials: sand, sawdust, general-purpose binder, kieselguhr
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
No special measures necessary if stored and handled correctly. Ensure thorough ventilation of stores and work areas. When using do not eat, drink or smoke. Hands and/or face should be washed before breaks and at the end of the shift.
Segregate from foods and animal feeds. Keep away from heat. Protect from direct sunlight.
When using do not eat, drink or smoke. Hands and/or face should be washed before breaks and at the end of the shift.
No special precautions necessary. The substance/product is non-combustible.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Suitable chemical resistant safety gloves (EN ISO 374-1) also with prolonged, direct contact (Recommended: Protective index 6, corresponding > 480 minutes of permeation time according to EN ISO 374-1): E.g. nitrile rubber (0.4 mm), chloroprene rubber (0.5 mm), butyl rubber (0.7 mm) etc.
Tightly fitting safety goggles (splash goggles) (e.g. EN 166)
Suitable respiratory protection for lower concentrations or short-term effect: Combination filter for gases/vapours of organic, inorganic, acid inorganic, alkaline compounds and toxic particles (e. g. EN 14387 Type ABEK-P3)
Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting boots, chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case of dust).
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable if stored and handled as prescribed/indicated.
No hazardous reactions if stored and handled as prescribed/indicated.
No hazardous reactions if stored and handled as prescribed/indicated.
See SDS section 7 - Handling and storage.
strong acids, strong bases, strong oxidizing agents
ammonia
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must be sent to a suitable incineration plant
Must be sent to a suitable incineration plant, observing local regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (ALCOHOLS, C10/C16, ETHOXYLATED, SULFATES, SODIUM SALTS)
- Transport Class
- 9, EHSM
- Packing Group
- III
None known
EmS: F-A; S-F
None known
Regulatory Information
Chemical regulations, safety assessments, and compliance status
To avoid risks to man and the environment, comply with the instructions for use.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Basta Pro?
The signal word is danger.
What is the physical form of Basta Pro?
Basta Pro is a liquid with blue color. It has characteristic odor.
What is the solubility of Basta Pro?
dispersible
What is Basta Pro used for?
crop protection product, herbicide
What are the hazard statements for Basta Pro?
This substance has 8 hazard statements:
- H303: May be harmful if swallowed.
- H315: Causes skin irritation.
- H318: Causes serious eye damage.
- H360: May damage fertility. Suspected of damaging the unborn child.
- H370: Causes damage to organs (Nervous system).
- H373: May cause damage to organs (Nervous system) through prolonged or repeated exposure.
- H402: Harmful to aquatic life.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of Basta Pro?
The melting point is The product has not been tested. and the boiling point is approx. 100 °C.