Surface Cleaner Pro

Supply fresh air. If required, provide artificial respiration. Keep patient warm. Consult doctor if symptoms persist. In case of unconsciousness bring patient into stable side position for transport.

Wash skin with water using soap if available. If persistent irritation occurs, obtain medical attention.

Rinse immediately opened eye for several minutes under running water. Then consult doctor.

Rinse out mouth and then drink plenty of water. Do not induce vomiting; instantly call for medical help.

CO2, extinguishing powder or water jet. Fight larger fires with water jet or alcohol-resistant foam.

Water with a full water jet.

Can form explosive gas-air mixtures. In case of incomplete combustion carbon monoxide can arise. Fumes are heavier than air and distributed over ground. Inflammation is possible from a far distance.

Endangered containers in the surrounding area should be cooled with a water-hose.

Wear protective equipment. Keep off unprotected persons. Extinguish naked flames. Remove flammable sources. No smoking. Avoid sparks. Avoid contact with skin, eyes and clothing. Avoid inhalation of fumes. Air contaminated rooms thoroughly. Protect against electrostatic sparks.

If large amounts are released, the authorities must be informed.

Dilute with much water.

Absorb with liquid-binding material

Materials: sand, diatomite, acid binders, universal binders, sawdust

Ensure good ventilation/exhaustion at the workplace. Prevent formation of aerosols.

Protect against direct sunlight, other sources of heat and ignition. Keep containers tightly closed. Store in cool, dry conditions.

Keep ignition sources away - Do not smoke. Protect against electrostatic charges.

Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves: Nitrile rubber, NBR, recommended thickness of the material: ≥ 0.4 mm, penetration time: ≥ 480 min. Butylrubber, BR, recommended thickness of the material: ≥ 0.5 mm, penetration time: ≥ 480 min. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.

Tightly sealed safety glasses.

Not necessary if room is well-ventilated.

Standard protective clothing. Chemical resistant safety-shoes or boots. If skin contact is possible, wear impenetrable protective clothing against this solvent.

No decomposition if used according to specifications.

No dangerous reactions known

Avoid all sources of ignition: heat, sparks, open flames.

strong oxidizing agents

Thermal decomposition can produce a variety of compounds, the precise nature of which will depend on the decomposition conditions. Formation of carbon monoxide and carbon dioxide in case of fire.

Must not be disposed of together with household garbage. Do not allow product to reach sewage system. If possible, send to be recycled, otherwise burn or deposit in a certified facility.

If possible, send to be recycled, otherwise burn or deposit in a certified facility.

Warning: Flammable liquids.

Warning: Flammable liquids.

Warning: Flammable liquids.