Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
Sikadur®-31 SBA Regular Set (41-59 ºF) Part A is a solid substance commonly used for further information, refer to product data sheet..
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS07
GHS08
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H341: Suspected of causing genetic defects.
- H350: May cause cancer by inhalation.
- H361: Suspected of damaging fertility or the unborn child.
- H372: Causes damage to organs (Lungs) through prolonged or repeated exposure.
Precautionary Statements
- P201: Obtain special instructions before use.
- P202: Do not handle until all safety precautions have been read and understood.
- P260: Do not breathe dust.
- P264: Wash skin thoroughly after handling.
- P270: Do not eat, drink or smoke when using this product.
- P272: Contaminated work clothing should not be allowed out of the workplace.
- P280: Wear protective gloves/ protective clothing/ eye protection/ face protection/ hearing protection.
- P302 + P352: IF ON SKIN: Wash with plenty of water.
- P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P308 + P313: IF exposed or concerned: Get medical advice/ attention.
- P333 + P313: If skin irritation or rash occurs: Get medical advice/ attention.
- P337 + P313: If eye irritation persists: Get medical advice/ attention.
- P362 + P364: Take off contaminated clothing and wash it before reuse.
- P405: Store locked up.
- P501: Dispose of contents/ container to an approved waste disposal plant.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
Sika Canada Inc.
manufacturer
601, avenue Delmar Pointe-Claire, QC H9R 4A9 Canada
CA
(514) 697-2610 / 1 (800) 933-7452
(514) 694-2792
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
CANUTEC
(613) 996-6666
CA
24 hours
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
mixtureChemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| bisphenol-A-(epichlorhydrin) epoxy resin (number average molecular weight <= 700) EC: 500-033-5 | 25068-38-6 | 30-60% | ⚠️ Hazardous |
| Quartz (SiO2) >5um EC: 238-878-4 | 14808-60-7 | 10-30% | ⚠️ Hazardous |
| 2,3-epoxypropyl o-tolyl ether EC: 218-645-3 | 2210-79-9 | 1-5% | ⚠️ Hazardous |
| Phenol, 4-nonyl, branched EC: 284-325-5 | 84852-15-3 | 1-5% | ⚠️ Hazardous |
Composition Notes
Actual concentration or concentration range is withheld as a trade secret
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Move to fresh air. Consult a physician after significant exposure.
🖐️ Skin Contact
Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. If symptoms persist, call a physician.
Symptoms:
Causes skin irritation. May cause an allergic skin reaction.
👁️ Eye Contact
Immediately flush eye(s) with plenty of water. Remove contact lenses. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist.
Symptoms:
Serious eye irritation.
🍽️ Ingestion/Swallowing
Clean mouth with water and drink afterwards plenty of water. Do not induce vomiting without medical advice.
🚨 Immediate Medical Attention Required
Obtain medical attention.
Medical Treatment
Treat symptomatically.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
Use of adequate ventilation should be sufficient to control worker exposure to airborne contaminants. If the use of this product generates dust, fumes, gas, vapor or mist, use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure below any recommended or statutory limits.
🧤 Hand Protection
Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary.
👁️ Eye Protection
Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary.
😷 Respiratory Protection
Use a properly fitted NIOSH approved air-purifying or air-fed respirator complying with an approved standard if a risk assessment indicates this is necessary. The filter class for the respirator must be suitable for the maximum expected contaminant concentration (gas/vapor/aerosol/particulates) that may arise when handling the product. If this concentration is exceeded, self-contained breathing apparatus must be used.
🦺 Skin/Body Protection
Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
UN 3082
📦 Proper Shipping Name
Environmentally hazardous substance, liquid, n.o.s. (epoxy resin)
⚠️ Transport Hazard Class
9
📋 Packing Group
III
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for Sikadur®-31 SBA Regular Set (41-59 ºF) Part A?
The signal word for this substance is "danger".
What is the physical form of Sikadur®-31 SBA Regular Set (41-59 ºF) Part A?
Sikadur®-31 SBA Regular Set (41-59 ºF) Part A is a solid appearing as solid with white color. It has aromatic odor.
What is the solubility of Sikadur®-31 SBA Regular Set (41-59 ºF) Part A?
slightly soluble
What is Sikadur®-31 SBA Regular Set (41-59 ºF) Part A used for?
For further information, refer to product data sheet.
What are the hazard statements for Sikadur®-31 SBA Regular Set (41-59 ºF) Part A?
This substance has 7 hazard statements: H315: Causes skin irritation. H317: May cause an allergic skin reaction. H319: Causes serious eye irritation. H341: Suspected of causing genetic defects. H350: May cause cancer by inhalation. H361: Suspected of damaging fertility or the unborn child. H372: Causes damage to organs (Lungs) through prolonged or repeated exposure.
What is the melting point of Sikadur®-31 SBA Regular Set (41-59 ºF) Part A?
The melting point is No data available and the boiling point is No data available.