Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Elastollan ET 19550 000
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Polymer
Manufacturers & Suppliers
BASF Taiwan Ltd.
manufacturer
16th Floor, No. 87, Sung Chiang Road, Taipei 10486, TAIWAN
+886 2 2518-7600
Emergency Contacts
台灣緊急連絡電話
0800-002-119
Emergency Contact
+49 180 2273-112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Polymer based on: polyurethane, stabilizing agents, additives
Does not contain any hazardous ingredients.
Notes
State of matter: solid. Polymer.
First Aid Measures
Emergency procedures for chemical exposure incidents
remove to fresh air and seek medical attention.
Symptoms: difficulties after dust has been inhaled
Burns caused by molten material require hospital treatment.
Symptoms: Burns caused by molten material
In case of contact with the eyes, rinse immediately for at least 15 minutes with plenty of water. If irritation develops, seek medical attention.
Immediately rinse mouth and then drink 200 - 300 ml water, do not induce vomiting, seek medical attention.
Immediate Medical Attention
seek medical attention
Medical Treatment
Treat according to symptoms (decontamination, vital functions)
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
water spray, foam, dry powder, carbon dioxide
water jet
carbon dioxide, carbon monoxide, hydrogen cyanide, nitrogen oxides, isocyanate. The substances/groups of substances mentioned can be released in case of fire.
Dispose of fire debris and contaminated extinguishing water in accordance with official regulations.
Firefighter Protection
Wear a self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Sweep/shovel up.
Sweep/shovel up.
No special precautions necessary.
Sweep/shovel up.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Provide suitable exhaust ventilation at the drying process and in the area surrounding the melt outlet of processing machines.
Segregate from foods and animal feeds. Keep container tightly closed.
No special precautions necessary.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Hand protection not required.
Safety glasses with side-shields (frame goggles) (e.g. EN 166)
Breathing protection if breathable aerosols/dust are formed.
Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting boots, chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case of dust).
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable.
No hazardous reactions if stored and handled as prescribed/indicated.
No hazardous reactions when stored and handled according to instructions.
No conditions to avoid anticipated.
No substances known that should be avoided.
carbon monoxide, carbon dioxide, hydrogen cyanide, isocyanates, nitrogen oxides. Gaseous products of degradation can be given off if the product is greatly overheated.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Incinerate in suitable incineration plant, observing local authority regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not applicable
- Shipping Name
- Not applicable
- Transport Class
- Not applicable
- Packing Group
- Not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
This BASF material should not be used for the manufacture of materials and articles intended to be used in so-called sensitive application like food contact or drinking water applications, medical devices, toys or consumer goods (e.g., products which will come into contact with the skin). If it is intended to use BASF materials for the manufacture of materials and articles in the above-mentioned applications, please contact your BASF Polyurethanes GmbH Sales Manager and Product Stewardship department.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Elastollan ET 19550 000?
The signal word is no signal word.
What is the physical form of Elastollan ET 19550 000?
Elastollan ET 19550 000 is a solid appearing as granules with natural color. It has slight odour odor.
What is the solubility of Elastollan ET 19550 000?
not soluble (15 ℃)
What is Elastollan ET 19550 000 used for?
Polymer