Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ELASTOLLAN 1180 A 10 000 CN
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Polymer
Manufacturers & Suppliers
BASF SE
manufacturer
67056 Ludwigshafen, GERMANY
+49 621 60-0
Emergency Contacts
International emergency number
+49 180 2273-112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Polymer based on: polyurethane, stabilizing agents, additives
Notes
Does not contain any hazardous ingredients.
First Aid Measures
Emergency procedures for chemical exposure incidents
If difficulties occur after dust has been inhaled, remove to fresh air and seek medical attention.
Burns caused by molten material require hospital treatment.
In case of contact with the eyes, rinse immediately for at least 15 minutes with plenty of water. If irritation develops, seek medical attention.
Immediately rinse mouth and then drink 200 - 300 ml water, do not induce vomiting, seek medical attention.
Medical Treatment
Treat according to symptoms (decontamination, vital functions), no known specific antidote.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
water spray, foam, dry powder, carbon dioxide
water jet
Carbon dioxide, Carbon monoxide, Hydrogen cyanide, nitrogen oxides, isocyanate. The substances/groups of substances mentioned can be released in case of fire.
Firefighter Protection
Wear a self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
No special precautions necessary.
Sweep/shovel up.
Sweep/shovel up.
No special precautions necessary.
Sweep/shovel up.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Provide suitable exhaust ventilation at the drying process and in the area surrounding the melt outlet of processing machines.
Keep container tightly closed. Protect against moisture.
No special precautions necessary.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Hand protection not required.
Safety glasses with side-shields (frame goggles) (e.g. EN 166)
Breathing protection if breathable aerosols/dust are formed.
Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting boots, chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case of dust).
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable. Peroxides: The product does not contain peroxides. The product/the substance has not a tendency towards the formation of peroxide.
No hazardous reactions if stored and handled as prescribed/indicated. Corrosion to metals: No corrosive effect on metal.
No hazardous reactions when stored and handled according to instructions. The product is chemically stable.
No conditions to avoid anticipated.
No substances known that should be avoided.
Gaseous products of degradation can be given off if the product is greatly overheated. Possible thermal decomposition products: Carbon monoxide, Carbon dioxide, Hydrogen cyanide, isocyanates, nitrogen oxides
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Can be used without re-conditioning. Incinerate in suitable incineration plant, observing local authority regulations.
Incinerate in suitable incineration plant, observing local authority regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
If it is intended to use materials for the manufacture of consumer goods (e. g. products which will come into contact with foodstuffs or with the skin, toys) or medical products, national and international regulations have to be observed. Where no regulations exist, consumer goods or medical products must at least comply with European legislation. We recommend contacting our Sales and our Product Safety departments.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ELASTOLLAN 1180 A 10 000 CN?
The signal word is no signal word.
What is the physical form of ELASTOLLAN 1180 A 10 000 CN?
ELASTOLLAN 1180 A 10 000 CN is a granules with colourless color. It has odourless odor.
What is the solubility of ELASTOLLAN 1180 A 10 000 CN?
insoluble
What is ELASTOLLAN 1180 A 10 000 CN used for?
Polymer
What are the hazard statements for ELASTOLLAN 1180 A 10 000 CN?
This substance has 1 hazard statement:
- The product does not require a hazard warning label in accordance with GHS criteria.
What is the melting point of ELASTOLLAN 1180 A 10 000 CN?
The melting point is > 100 °C and the boiling point is The product is a non-volatile solid..