NextSDS Logo
In

Integrity 668 EC

WARNING liquid SDS/MSDS

Chemical Product Identification & Regulatory Data

Official chemical identifiers, CAS numbers, and regulatory compliance information

Basic Product Information

Product Name
Integrity 668 EC

Regulatory Identifiers

CAS Number
N/A

Chemical Abstracts Service registry number - unique identifier for chemical substances

Uses Information

Identified Uses
crop protection product, herbicide

Overview

Integrity 668 EC commonly used crop protection product, herbicide.

Manage Your Safety Data Sheets

Organize and access your chemical safety data with ease.

GHS Hazard Classification & Safety Warnings

Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications

Classification Status

Classified

Signal Word

warning (Warning)

Hazard Classifications

Acute Tox. Category 5
Acute Tox. Category 5
Skin Irrit. Category 3
Eye Irrit. Category 2A
Skin Sens. Category 1B
Carc. Category 2
Repr. Category 2
STOT SE Category 3
Aquatic Acute Category 1
Aquatic Chronic Category 1

GHS Hazard Pictograms & Safety Symbols

GHS07 GHS Hazard Pictogram: Health hazard warning - Materials harmful to health including irritants and sensitizers

GHS07

GHS08 GHS Hazard Pictogram: Serious health hazard - Carcinogenic, mutagenic, or toxic to organs

GHS08

GHS09 GHS Hazard Pictogram: Environmental hazard - Materials toxic to aquatic life and environment

GHS09

GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions

Hazard Statements

  • H316: Causes mild skin irritation.
  • H317: May cause an allergic skin reaction.
  • H319: Causes serious eye irritation.
  • H335: May cause respiratory irritation.
  • H351: Suspected of causing cancer.
  • H361: Suspected of damaging the unborn child.
  • H400: Very toxic to aquatic life.
  • H410: Very toxic to aquatic life with long lasting effects.

Precautionary Statements

  • P101: If medical advice is needed, have product container or label at hand.
  • P102: Keep out of reach of children.
  • P103: Read carefully and follow all instructions.
  • P201: Obtain special instructions before use.
  • P202: Do not handle until all safety precautions have been read and understood.
  • P261: Avoid breathing mist or vapour or spray.
  • P264: Wash contaminated body parts thoroughly after handling.
  • P271: Use only outdoors or in a well-ventilated area.
  • P272: Contaminated work clothing should not be allowed out of the workplace.
  • P280: Wear protective gloves, protective clothing and eye protection or face protection.
  • P302+P352: IF ON SKIN: Wash with plenty of soap and water.
  • P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
  • P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • P308+P313: IF exposed or concerned: Get medical attention.
  • P312: Call a POISON CENTER or physician if you feel unwell.
  • P333+P313: If skin irritation or rash occurs: Get medical attention.
  • P337+P313: If eye irritation persists: Get medical attention.
  • P362+P364: Take off contaminated clothing and wash it before reuse.
  • P391: Collect spillage.
  • P403+P233: Store in a well-ventilated place. Keep container tightly closed.
  • P405: Store locked up.
  • P501: Dispose of contents and container to hazardous or special waste collection point.

Chemical Manufacturers & Supply Chain

Authorized suppliers, manufacturers, and distribution network information

BASF SE

manufacturer

๐Ÿ“

67056 Ludwigshafen, GERMANY

๐ŸŒ

DE

๐Ÿ“ž

+49 621 60-27777

24/7 Emergency Response & Poison Control

Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies

Emergency Contact

๐Ÿ“ž

+49 180 2273-112

๐ŸŒ

DE

Chemical Composition & Hazardous Ingredients

Detailed component analysis, concentration ranges, and hazardous substance identification

Product Type

mixture

General Composition

crop protection product, herbicide, Emulsifiable concentrate (EC)

Chemical Components & Hazardous Substances

Chemical Name CAS Number Concentration Hazardous
dimethenamid-P
EC: 605-329-9
163515-14-8 55% โš ๏ธ Hazardous
saflufenacil
EC: 619-504-2
372137-35-4 6.24% โš ๏ธ Hazardous
N,N-Dimethyldecan-1-amide
EC: 238-405-1
14433-76-2 15% โš ๏ธ Hazardous
N,N-dimethyloctanamide
EC: 214-272-5
1118-92-9 15% โš ๏ธ Hazardous
2-Ethylhexan-1-ol
EC: 203-234-3
104-76-7 5% โš ๏ธ Hazardous
solvent naphtha
EC: 265-198-5
64742-94-5 5% โš ๏ธ Hazardous
calciumdodecylben- zeensulfonaat
EC: 247-557-8
26264-06-2 5% โš ๏ธ Hazardous
naphthalene
EC: 202-049-5
91-20-3 1% โš ๏ธ Hazardous

Emergency First Aid Measures

Critical first aid procedures for chemical exposure incidents and medical emergencies

๐Ÿซ Inhalation Exposure

Keep patient calm, remove to fresh air, seek medical attention.

๐Ÿ–๏ธ Skin Contact

Wash thoroughly with soap and water.

๐Ÿ‘๏ธ Eye Contact

Wash affected eyes for at least 15 minutes under running water with eyelids held open, consult an eye specialist.

๐Ÿฝ๏ธ Ingestion/Swallowing

Immediately rinse mouth and then drink 200-300 ml of water, seek medical attention.

Medical Treatment

Treat according to symptoms (decontamination, vital functions), no known specific antidote.

Related Chemical Substances & Alternative Products

Similar chemicals with comparable safety profiles and industrial applications

Technical Specifications & Material Properties

Physical state, chemical properties, melting point, boiling point, and material characteristics

๐Ÿงช Physical State
liquid
Critical Property
๐Ÿ“Š Physical State Data
liquid
๐Ÿ“Š State Under Standard Conditions
Not available
๐Ÿ‘๏ธ Appearance
Not available
๐ŸŽจ Colour
light brown, clear
๐Ÿ“Š Colour Intensity
Not available
๐Ÿ“Š Form
liquid
๐Ÿ‘ƒ Odor
aromatic
๐Ÿ“Š Odor Threshold
Not determined due to potential health hazard by inhalation.
๐Ÿงช Ph
approx. 4 - 6
๐ŸงŠ Melting Point
Not available
๐Ÿ’จ Boiling Point
approx. 232 - 278 โ„ƒ
Critical Property
๐Ÿ”ฅ Flash Point
112,8 โ„ƒ
Critical Property
๐Ÿ“Š Freezing Point
approx. - 20 โ„ƒ (1.013,3 hPa)
๐Ÿ“Š Softening Point
Not available
๐Ÿ“Š Solidification Point
Not available
๐Ÿ“Š Cloud Point
Not available
๐Ÿ“Š Crystallisation Point
Not available
๐Ÿ“Š Relative Evaporation Rate
Not available
๐Ÿ’จ Evaporation Rate
not applicable
๐Ÿ’จ Vapor Pressure
approx. 0,05 hPa (20 โ„ƒ)
๐Ÿ“Š Vapor Density
Not available
๐Ÿ“Š Relative Density
Not available
๐Ÿ“Š Bulk Density
Not available
โš–๏ธ Density
approx. 1,092 g/cm3 (20 โ„ƒ)
Critical Property
๐Ÿ”ฅ Flammability
not applicable
๐Ÿ“Š Upper Explosive Limit
Not available
๐Ÿ“Š Lower Explosive Limit
Not available
๐Ÿ“Š Explosive Limits
Not available
๐Ÿ“Š Auto Ignition Temperature
approx. 491 โ„ƒ
๐Ÿ“Š Decomposition Temperature
Not available
๐Ÿ’ง Solubility
emulsifiable, insoluble
๐Ÿ“Š Partition Coefficient
2,6
๐Ÿ“Š Solubility In Water
emulsifiable, insoluble
๐Ÿ“Š Solubility In Fat
Not available
๐Ÿ“Š Molecular Weight
Not available
๐Ÿ“Š Voc Content
Not available
๐Ÿ“Š Metal Corrosion
Not available
๐Ÿ“Š Dynamic Viscosity
19,56 mPa.s
๐Ÿ“Š Kinematic Viscosity
Not available
๐Ÿ“Š Properties Status
Not available

Exposure Controls & Personal Protective Equipment (PPE)

Occupational exposure limits, engineering controls, and required safety equipment

๐Ÿงค Hand Protection

Suitable chemical resistant safety gloves (EN ISO 374-1) also with prolonged, direct contact (Recommended: Protective index 6, corresponding > 480 minutes of permeation time according to EN ISO 374-1): E.g. nitrile rubber (0.4 mm), chloroprene rubber (0.5 mm), butyl rubber (0.7 mm) etc.

๐Ÿ‘๏ธ Eye Protection

Safety glasses with side-shields (frame goggles) (e.g. EN 166)

๐Ÿ˜ท Respiratory Protection

Suitable respiratory protection for lower concentrations or short-term effect: Combination filter for gases/vapours of organic, inorganic, acid inorganic, alkaline compounds and toxic particles (e. g. EN 14387 Type ABEK-P3)

๐Ÿฆบ Skin/Body Protection

Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting boots, chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case of dust).

Transportation & Shipping Information

UN numbers, shipping names, transport classes, and regulatory transport requirements

๐Ÿท๏ธ UN Number

UN3082

๐Ÿ“ฆ Proper Shipping Name

ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (contains DIMETHENAMID-P, SAFLUFENACIL)

โš ๏ธ Transport Hazard Class

9, EHSM

๐Ÿ“‹ Packing Group

III

๐Ÿš› ADR Transport Precautions

None known

๐Ÿšข IMDG Maritime Transport Precautions

None known

โœˆ๏ธ IATA Air Transport Precautions

None known

Chemical Safety FAQ & Common Questions

Most frequently asked questions about safety, handling, storage, and regulatory compliance

What is the hazard signal word for Integrity 668 EC?

The signal word for this substance is "warning".

What is the physical form of Integrity 668 EC?

Integrity 668 EC is a liquid with light brown, clear color. It has aromatic odor.

What is the solubility of Integrity 668 EC?

emulsifiable, insoluble

What is Integrity 668 EC used for?

crop protection product, herbicide

What are the hazard statements for Integrity 668 EC?

This substance has 8 hazard statements: H316: Causes mild skin irritation. H317: May cause an allergic skin reaction. H319: Causes serious eye irritation. H335: May cause respiratory irritation. H351: Suspected of causing cancer. H361: Suspected of damaging the unborn child. H400: Very toxic to aquatic life. H410: Very toxic to aquatic life with long lasting effects.