Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Integrity
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Temporary crown and bridge material
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
DENTSPLY DeTrey GmbH
manufacturer
De-Trey-Str. 1, D-78467 Konstanz, GERMANY
+49-(0)7531-583-0
Emergency Contacts
Emergency Contact
+49-(0)7531-583-0
8:00 - 17:00 (GMT + 1:00)
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Urethane modified Bis-GMA dimethacrylate resin | 41637-38-1 | 50 - 100% | Yes |
For the wording of the listed risk phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Immediately wash with water and soap and rinse thoroughly.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
If symptoms persist consult doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Water with full jet.
No further relevant information available.
Firefighter Protection
No special measures required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation
Do not allow to enter sewers/ surface or ground water.
Absorb with liquid-binding material
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Observe normal care for working with chemicals. Product is intended for dental use only.
Store in a cool location. Keep receptacle tightly sealed.
Observe normal care for working with chemicals.
No special measures required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves: Natural rubber, NR. Recommended thickness of the material: ≥ 0.12 mm. Permeation: Level ≥1. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
Tightly sealed goggles.
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device. Not necessary if room is well-ventilated.
Protective work clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used and stored according to specifications.
No further relevant information available.
No dangerous reactions known
No decomposition if used and stored according to specifications.
No further relevant information available.
No dangerous decomposition products known
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
No further relevant information available regarding aquatic toxicity.
12.2 Persistence and degradability
No further relevant information available.
12.3 Bioaccumulative potential
No further relevant information available.
12.4 Mobility in soil
No further relevant information available.
12.5 Results of PBT and vPvB assessment
The substance is not classified as PBT or vPvB.
12.6 Other adverse effects
No further relevant information available.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Must not be disposed together with household garbage.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
No further relevant information available.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Integrity?
The signal word is warning.
What is the physical form of Integrity?
Integrity is a fluid with yellowish color. It has ester-like odor.
What is Integrity used for?
Temporary crown and bridge material
What are the hazard statements for Integrity?
This substance has 3 hazard statements:
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H335: May cause respiratory irritation.
What is the melting point of Integrity?
The melting point is undetermined and the boiling point is Undetermined..