Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Sikafloor®-220 W Conductive Part B
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Epoxy coating
Manufacturers & Suppliers
Sika Schweiz AG
manufacturer
Tüffenwies 16 8048 Zürich
+41 58 436 40 40
Emergency Contacts
Tox Info Suisse
+41(0)44 251 51 51
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS09
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| bis-[4-(2,3- epoxipropoxi)phenyl]propane EC: 216-823-5 | 1675-54-3 | 40 - 60% | Yes |
| Reaction mass of isomers of epoxy resin BFDGE EC: 701-263-0 | --- | 10 - 20% | Yes |
| Cashew, nutshell liq., oligomeric reaction products with 1-chloro- 2,3-epoxypropane EC: 500-210-7 | 68413-24-1 | 2.5 - 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. Consult a physician after significant exposure.
Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. If symptoms persist, call a physician.
Immediately flush eye(s) with plenty of water. Remove contact lenses. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist.
Do not induce vomiting without medical advice. Rinse mouth with water. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Maintain air concentrations below occupational exposure standards. Ensure adequate ventilation, especially in confined areas.
Chemical-resistant, impervious gloves complying with an approved standard must be worn at all times when handling chemical products. Reference number EN 374. Follow manufacturer specifications. Suitable for short time use or protection against splashes: Butyl rubber/nitrile rubber gloves (> 0,1 mm) Contaminated gloves should be removed. Suitable for permanent exposure: Viton gloves (0.4 mm), breakthrough time >30 min.
Safety glasses with side-shields conforming to EN 166 Eye wash bottle with pure water
No special measures required.
Protective clothing (e.g. Safety shoes acc. to EN ISO 20345, long-sleeved working clothing, long trousers). Rubber aprons and protective boots are additionaly recommended for mixing and stirring work.
Do not flush into surface water or sanitary sewer system. If the product contaminates rivers and lakes or drains inform respective authorities.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN 3082
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (epoxy resin)
- Transport Class
- 9
- Packing Group
- III
Transport in accordance with special provision 375
Transport in accordance with 2.10.2.7 of the IMDG-Code
Transport in accordance with special regulation A 197
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Sikafloor®-220 W Conductive Part B?
The signal word is warning.
What is the physical form of Sikafloor®-220 W Conductive Part B?
Sikafloor®-220 W Conductive Part B is a liquid with white color. It has very faint odor.
What is the solubility of Sikafloor®-220 W Conductive Part B?
soluble
What is Sikafloor®-220 W Conductive Part B used for?
Epoxy coating
What are the hazard statements for Sikafloor®-220 W Conductive Part B?
This substance has 4 hazard statements:
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of Sikafloor®-220 W Conductive Part B?
The melting point is No data available and the boiling point is No data available.