6-Methoxyluteolin

If inhaled, remove to fresh air; if breathing is difficult, give oxygen; if breathing stops, give artificial respiration.

Flush with copious amounts of water; remove contaminated clothing and shoes; call a physician; Take victim to hospital immediately; call a physician.

Check for and remove contact lenses and flush with copious amounts of water; assure adequate flushing by separating the eyelids with fingers; call a physician.

If swallowed, do NOT induce vomiting. wash out mouth with copious amounts of water; call a physician.

Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.

Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).

Where risk assessment shows air-purifying respirators are appropriate use a full-face particle respirator type N99 (US) or type P2 (EN 143) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).

Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place. The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.