Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TEROSON WX 210
- Synonyms
- MULTI-WAX SPRAY SD 500ML INTER
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Corrosion Protection Agents for Metals
Manufacturers & Suppliers
Henkel Technologies (Pty.) Ltd.
manufacturer
Potgieter Street, 1450 Alrode Ext. 4, 4534 Johannesburg 2000, South Africa
+27 11 864 4950
Emergency Contacts
Emergency Contact
0800 202 202
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Corrosion Protection Agents for Metals
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Naphtha (Petroleum), hydrodesulfurized heavy, <0,1% Benzene EC: 265-185-4 | 64742-82-1 | 25% | Yes |
| Isobutane EC: 200-857-2 | 75-28-5 | 25% | Yes |
| Propane EC: 200-827-9 | 74-98-6 | 20% | Yes |
| Sulfonic acids, petroleum, calcium salts, overbased EC: 272-213-9 | 68783-96-0 | 10% | Yes |
| Naphtha, hydrotreated heavy; (petroleum) EC: 265-150-3 | 64742-48-9 | 10% | Yes |
Notes
Base substances of preparation: Solvent
First Aid Measures
Emergency procedures for chemical exposure incidents
Fresh air, oxygen supply, warmth; seek specialist medical attention.
Symptoms: Vapors may cause drowsiness and dizziness.
Rinse with running water and soap. Apply replenishing cream. Change all contaminated clothing.
Symptoms: Repeated exposure may cause skin dryness or cracking.
Rinse immediately with plenty of running water (for 10 minutes).
Symptoms: Seek medical attention if necessary.
not relevant.
Immediate Medical Attention
See section: Description of first aid measures
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
All common extinguishing agents are suitable.
Water jet (solvent-containing product).
In case of fire toxic gases can be released.
Firefighter Protection
Wear self-contained breathing apparatus. Wear protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Avoid contact with skin and eyes. Keep unprotected persons away. Danger of slipping on spilled product.
Do not empty into drains / surface water / ground water.
Remove with liquid-absorbing material (sand, peat, sawdust).
Materials: liquid-absorbing material (sand, peat, sawdust)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid open flames and sources of ignition. Take measures to prevent the build-up of electrostatic charges.
Ensure good ventilation/extraction.
Wash hands before work breaks and after finishing work. Do not eat, drink or smoke while working.
Avoid open flames and sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
In case of aerosol forming ensure sufficient suction and ventilation.
Chemical-resistant protective gloves (EN 374). Suitable materials for short-term contact or splashes (recommended: at least protection index 2, corresponding to > 30 minutes permeation time as per EN 374): Polychloroprene (CR; >= 1 mm thickness) or natural rubber (NR; >=1 mm thickness) Suitable materials for longer, direct contact (recommended: protection index 6, corresponding to > 480 minutes permeation time as per EN 374): Polychloroprene (CR; >= 1 mm thickness) or natural rubber (NR; >=1 mm thickness) This information is based on literature references and on information provided by glove manufacturers, or is derived by analogy with similar substances. Please note that in practice the working life of chemical-resistant protective gloves may be considerably shorter than the permeation time determined in accordance with EN 374 as a result of the many influencing factors (e.g. temperature). If signs of wear and tear are noticed then the gloves should be replaced.
Goggles which can be tightly sealed.
Suitable protective mask during fog or aerosol formation.
Wear protective equipment. Protective clothing that covers arms and legs.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
12.2. Persistence and degradability
The substance showed 9.1% degradation under aerobic conditions in an OECD 301 B test.
12.3. Bioaccumulative potential / 12.4. Mobility in soil
12.3. Bioaccumulative potential / 12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment
The substances Naphtha (Petroleum), hydrodesulfurized heavy and Propane do not fulfill the PBT or vPvB criteria.
12.6. Other adverse effects
No data available.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
not applicable Tunnelcode: (D)
not applicable
not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is TEROSON WX 210 known by?
TEROSON WX 210 is also known as: MULTI-WAX SPRAY SD 500ML INTER
What is the hazard signal word for TEROSON WX 210?
The signal word is no signal word.
What is the physical form of TEROSON WX 210?
TEROSON WX 210 is a liquid appearing as aerosol with light brown color. It has characteristic odor.
What is TEROSON WX 210 used for?
Corrosion Protection Agents for Metals