Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TEROSON WX 400 known as TEROTEX-HV 400 60L INTER
- Product Code
- 784190
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Cavity sealing
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
3. COMPOSITION / INFORMATION ON INGREDIENTS — Table lists hazardous components with CAS Number and Weight %*
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, < 2% aromatics | 64742-48-9 | 30 - 60% | Yes |
| Calcium carbonate | 471-34-1 | 5 - 10% | Yes |
| Sulfonic acids, petroleum, calcium salts | 61789-86-4 | 5 - 10% | Yes |
| Mineral oil mix | --- | 5 - 10% | Yes |
| Petrolatum (petroleum), oxidized | 64743-01-7 | 1 - 5% | Yes |
| Distillates (petroleum), solvent-refined light paraffinic, < 3%DMSO | 64741-89-5 | 1 - 5% | Yes |
| Slack wax (petroleum), hydrotreated | 92062-09-4 | 1 - 5% | Yes |
| Nonane | 111-84-2 | 1 - 5% | Yes |
| Distillates (petroleum), hydrotreated heavy paraffinic | 64742-54-7 | 1 - 5% | Yes |
| Distillates (petroleum), solvent-dewaxed heavy paraffinic < 3%DMSO | 64742-65-0 | 1 - 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, immediately remove the affected person to fresh air. If symptoms develop and persist, get medical attention.
Immediately wash skin thoroughly with soap and water. If symptoms develop and persist, get medical attention.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Get immediate medical attention. Do not induce vomiting.
Immediate Medical Attention
Seek immediate medical attention for eye contact and ingestion. If inhalation or skin symptoms develop and persist, get medical attention.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Use only with adequate ventilation. Avoid open flames. Make sure containers are properly grounded before use or transfer of material. Remove all sources of ignition. Do not take internally. For industrial use only.
Not available.
Wash thoroughly after handling.
Avoid open flames. Remove all sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None under normal processing.
Keep away from heat, ignition sources and incompatible materials.
This product may react with strong acids or oxidizing agents.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Oxides of nitrogen.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1139
- Shipping Name
- Coating solution
- Transport Class
- 3
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TEROSON WX 400 known as TEROTEX-HV 400 60L INTER?
The signal word is warning.
What is the physical form of TEROSON WX 400 known as TEROTEX-HV 400 60L INTER?
TEROSON WX 400 known as TEROTEX-HV 400 60L INTER is a liquid with beige, transparent color. It has hydrocarbons odor.
What is the solubility of TEROSON WX 400 known as TEROTEX-HV 400 60L INTER?
Not miscible Water
What is TEROSON WX 400 known as TEROTEX-HV 400 60L INTER used for?
Cavity sealing
What are the hazard statements for TEROSON WX 400 known as TEROTEX-HV 400 60L INTER?
This substance has 5 hazard statements:
- H226: FLAMMABLE LIQUID AND VAPOUR.
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H336: MAY CAUSE DROWSINESS OR DIZZINESS.
What is the melting point of TEROSON WX 400 known as TEROTEX-HV 400 60L INTER?
The melting point is Not applicable, Product is a liquid and the boiling point is 154 °C (309.2 °F).