NextSDS Logo
Safety Data Sheet EN

Molybdenum Disulfide Grease

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Molybdenum Disulfide Grease
Product Code
191D57-7

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

M

Makita U.S.A., Inc.

manufacturer

14930-C Northam Street, La Mirada, CA 90638

(510) 657-9881

Emergency Contacts

CHEMTREC

1-800-424-9300

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Flam. Sol.
Pyr. Sol.
Self-heat.
Met. Corr.
Acute Tox.
Acute Tox.
Acute Tox.
Skin Irrit.
Eye Irrit.
Resp. Sens.
Skin Sens.
Muta.
Carc.
Repr.
STOT SE
STOT RE
Asp. Tox.
Aquatic Acute
Aquatic Chronic

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Refined mineral base oil --- 40 - 50% Yes
Lithium soap thickener --- 1 - 10% No
Additives --- 45 - 55% No
Molybdenum disulfide EC: 215-263-9 1317-33-5 45 - 55% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove exposed person to fresh air if adverse effects are observed.

Skin contact

Wash with soap and water. Get medical attention if irritation develops.

Eye contact

Flush immediately with water for at least 15 minutes. Get immediate medical attention.

Ingestion

Do not make person vomit unless directed to do so by medical personnel.

Immediate Medical Attention

Get immediate medical attention.

Medical Treatment

Treatment should in general be symptomatic and directed to relieving any effects.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use water fog, foam, dry chemical or carbon dioxide to extinguish flames.

Unsuitable media

DO NOT use forcible water. See SECTION 11 for more detailed information on health effects and symptoms.

Specific hazards

In a fire or if heated, a pressure increase will occur, and the container may burst.

Instructions

Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training.

Firefighter Protection

Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus with a full face-piece operated in positive pressure mode.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

For non-emergency personnel: Eliminate all ignition sources. Evacuate surrounding areas. For emergency responders: Danger of slipping on leaked/spilled product.

Small spill

Move containers from spill area. Absorb with an inert material and place in an appropriate waste disposal container. Dispose of via a licensed waste disposal contractor.

Large spill

Move containers from spill area. Prevent entry into sewers, water courses, basements or confined areas. Contain and collect spillage with non-combustible, absorbent material e.g., sand, earth, vermiculite or diatomaceous earth and place in container for disposal according to local regulations. Suction or scoop the spill into appropriate disposal or recycling vessels, then cover spill area with oil absorbent. Dispose of via a licensed waste disposal contractor.

Environmental

Should be prevented from contaminating soil or from entering sewage and drainage systems and bodies of water.

Cleanup methods

Absorb with an inert material and place in an appropriate waste disposal container. Suction or scoop the spill into appropriate disposal or recycling vessels, then cover spill area with oil absorbent.

Materials: inert material, non-combustible, absorbent material e.g., sand, earth, vermiculite or diatomaceous earth, oil absorbent

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Put on appropriate personal protective equipment (see SECTION 8). Avoid contact with eyes, skin, and clothing. Avoid breathing vapor or mist. Keep in the original container or an approved alternative made from a compatible material, kept tightly closed when not in use. Empty containers retain product residue and can be hazardous. Do not reuse container.

Storage

Store in accordance with local regulations. Store in a dry, cool and well-ventilated area, away from incompatible materials (see SECTION 10). Keep away from heat and direct sunlight. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Store and use only in equipment/ containers designed for use with this product. Do not store in unlabeled containers. Not suitable: Prolonged exposure to elevated temperature.

Hygiene

Workers should wash hands and face before eating, drinking, and smoking.

Fire prevention

Keep away from heat.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

When mist is generated, the limited part should be ventilated.

Hands

To prevent contact, wear impervious clothing such as glove or apron.

Eyes

Wear safety glasses with side shields.

Respiratory

No special respiratory protection equipment is required under normal conditions of use with adequate ventilation. In case of insufficient ventilation, wear suitable respiratory equipment.

Skin/Body

To prevent contact, wear impervious clothing such as glove or apron.

Environmental

Avoid release to the environment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Crystallisation Point
---
Cloud Point
---
Kinematic Viscosity
---
Boiling Point
Undetermined
Appearance
Smooth, Grayish black, semi-solid
Freezing Point
---
Form
---
Solubility In Water
Negligible (in water)
Evaporation Rate
Not determined
Softening Point
---
Relative Density
Not determined
Solubility In Fat
---
Flammability
---
Explosive Limits
---
Physical State
semi-solid
Properties Status
---
Odor Threshold
Not determined
Decomposition Temperature
Not determined
Solubility
Negligible (in water)
Molecular Weight
---
Solidification Point
---
Bulk Density
---
Auto Ignition Temperature
Not determined
Odor
Bland odor
Physical State Data
liquid
Lower Explosive Limit
Not determined
Colour Intensity
---
Partition Coefficient
Not determined
State Under Standard Conditions
---
Upper Explosive Limit
Not determined
Dynamic Viscosity
Not determined
Vapor Pressure
Not determined
Colour
---
Melting Point
Not determined
Ph
Not determined
Voc Content
---
Relative Evaporation Rate
---
Metal Corrosion
---
Flash Point
>200 (SETA) °C
Density
Ca. 1.5~1.6 (25°C)
Vapor Density
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable

Reactivity

No specific test data available for this product.

Hazardous reactions

Will not Occur

Avoid

Heat, sparks, flames and other ignition sources.

Incompatible

Acids. Oxidizing agents such as H2O2 permanganates and perchlorates. Halogens and halogenated compounds.

Decomposition

Carbon oxides (CO, CO2), oxides of sulfur.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Place contaminated materials in disposable containers and dispose of in a manner consistent with applicable regulations. Contact local environmental or health authorities for approved disposal of this material.

Disposal

Place contaminated materials in disposable containers and dispose of in a manner consistent with applicable regulations. Contact local environmental or health authorities for approved disposal of this material.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
Not regulated
Shipping Name
Not regulated
Transport Class
Not regulated
Packing Group
Not regulated
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Chemical Safety Assessment Not performed

Unclassified hazards (HNOC): Not applicable. Percentage of ingredient(s) with unknown toxicity: Not applicable. Others: No further relevant information available.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Molybdenum Disulfide Grease?

The signal word is no signal word.

What is the physical form of Molybdenum Disulfide Grease?

Molybdenum Disulfide Grease is a semi-solid appearing as smooth, grayish black, semi-solid . It has bland odor odor.

What is the solubility of Molybdenum Disulfide Grease?

Negligible (in water)

What is the melting point of Molybdenum Disulfide Grease?

The melting point is Not determined and the boiling point is Undetermined.