Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Molda® 3 Normal
- Chemical Name
- PLASTER 1
Regulatory Identifiers
- CAS Number
- 7778-18-9 Check regulations →
- EC Number
- 231-900-3 Check regulations →
- REACH No.
- 01-2119444918-26-0322
Identified Uses
SU3 - Industrial uses, SU10 - Formulation, SU22 - Professional uses
Manufacturers & Suppliers
PLACOPLATRE®
manufacturer
12 place de l'Iris.92400.Courbevoie.France.
+33 (0)1 88 54 00 00
http://www.saintgobainformula.com
Emergency Contacts
INRS / ORFILA
+33 (0)1 45 42 59 59
NHS
111
National Poisons Information Centre
(01) 809 3000
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| PLASTER 1 EC: 231-900-3 | 7778-18-9 | 100% | No |
Notes
Information on ingredients : [i] Substance for which maximum workplace exposure limits are available.
First Aid Measures
Emergency procedures for chemical exposure incidents
Watch out for any remaining product between skin and clothing, watches, shoes, etc.
Wash thoroughly with fresh, clean water for 15 minutes holding the eyelids open. If there is any redness, pain or visual impairment, consult an ophthalmologist.
Seek medical attention, showing the label.
Related Substances
Similar chemicals with comparable safety profiles
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure that there is adequate ventilation, especially in confined areas.
Wear suitable protective gloves in the event of prolonged or repeated skin contact.
Avoid contact with eyes. Before handling powders or dust emission, wear mask goggles in accordance with standard EN166.
Avoid inhaling dust. Type of FFP mask : Wear a disposable half-mask dust filter in accordance with standard EN149/A1.
Work clothing worn by personnel shall be laundered regularly. After contact with the product, all parts of the body that have been soiled must be washed.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Molda® 3 Normal?
The signal word is no signal word.
What is the physical form of Molda® 3 Normal?
Molda® 3 Normal is a powder or dust. with colour varies white. beige. light yellow. grey or reddish tinge or brick red color. It has neutral odor.
What is Molda® 3 Normal used for?
SU3 - Industrial uses, SU10 - Formulation, SU22 - Professional uses
What is the melting point of Molda® 3 Normal?
The melting point is Not relevant. and the boiling point is Not relevant..