Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Molda Dur
- Product Code
- Molda Dur.
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
binding agents, filler.
Uses advised against
Do not attempt to make a cast enclosing any part of the body : risk of burning.
Manufacturers & Suppliers
PLACOPLATRE®
manufacturer
34 avenue Franklin Roosevelt, 92282 Suresnes, France
+33 (0)1 46 25 46 25
http://www.saintgobainformula.com
Emergency Contacts
INRS / ORFILA
+33 (0)1 45 42 59 59
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Composition :
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| SULFATE DE CALCIUM CASO4 + 0,5H2O EC: 231-900-3 | 7778-18-9 | 50 - 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Watch out for any remaining product between skin and clothing, watches, shoes, etc.
Wash thoroughly with soft, clean water for 15 minutes holding the eyelids open.
Immediate Medical Attention
If there is any redness, pain or visual impairment, consult an ophthalmologist. Seek medical attention (in the event of swallowing).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Any means suitable for extinguishing surrounding fire.
None.
Firefighter Protection
Special protective equipment for fire-fighters: None.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Consult the safety measures listed under headings 7 and 8.
Prevent any material from entering drains or waterways.
Retrieve the product by mechanical means (sweeping/vacuuming)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Always wash hands after handling. No special provisions if the product is used appropriately.
To avoid the exposure to moisture
No smoking, eating or drinking in areas where the mixture is used.
Prevent access by unauthorised personnel. Product itself does not burn. Coordinate fire fighting measures to the fire surroundings.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure that there is adequate ventilation, especially in confined areas.
Wear suitable protective gloves in the event of prolonged or repeated skin contact.
Avoid contact with eyes. Before handling powders or dust emission, wear mask goggles in accordance with standard EN166.
Avoid breathing dust. Type of FFP mask : Wear a disposable half-mask dust filter in accordance with standard EN149. Maintain the general maximum admissible concentration in the work place (refer section 8.1). In case of strong dust emission wear respiratory filters type FFP 1.
Work clothing worn by personnel shall be laundered regularly. After contact with the product, all parts of the body that have been soiled must be washed.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
This mixture is stable under the recommended handling and storage conditions in section 7.
No materials known.
Mixing with an aqueous solution of sodium carbonate will result in the formation of carbon dioxide.
formation of dusts
None.
No dangerous products of decomposition. Decomposition takes place from temperatures above: 1450°C
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Molda Dur?
The signal word is no signal word.
What is the physical form of Molda Dur?
Molda Dur is a powder or dust with colour varies white. beige. light yellow. grey or reddish tinge or brick red color. It has neutral odor.
What is Molda Dur used for?
binding agents, filler.