ACHEM BL-3007S

In case of accident by inhalation: remove casualty to fresh air and keep at rest. In all cases of doubt, or when symptoms persist, seek medical advice.

Symptoms: Headache. Dizziness. drowsiness. unconsciousness.

After contact with skin, wash immediately with plenty of water and soap. Change contaminated clothing. In case of skin irritation, seek medical treatment.

Symptoms: Repeated exposure may cause skin dryness or cracking.

Rinse immediately carefully and thoroughly with eye-bath or water. In case of troubles or persistent symptoms, consult an ophthalmologist.

Rinse mouth thoroughly with water. Let water be swallowed in little sips (dilution effect). Do not induce vomiting. In all cases of doubt, or when symptoms persist, seek medical advice. Never give anything by mouth to an unconscious person or a person with cramps.

Carbon dioxide. Extinguishing powder. Dry extinguishing powder. alcohol resistant foam. In case of major fire and large quantities: Water spray.

High power water jet.

Vapours may form explosive mixtures with air. Reignition possible at long range. Vapours are heavier than air and will spread at floor level.

Use water spray/stream to protect personnel and to cool endangered containers.

Guide people to safety. Remove all sources of ignition. Ventilate affected area. Wear personal protection equipment. (Refer to chapter 8.) Avoid contact with skin, eye and clothing. Do not breathe gas/fumes/vapour/spray.

Do not empty into drains or the aquatic environment. Prevent spreading over great surfaces (e.g. by damming or installing oil booms).

Clean contaminated objects and areas thoroughly observing environmental regulations.

Keep away from sources of ignition - No smoking. Do not breathe gas/vapour/spray. Avoid contact with skin, eye and clothing.

Keep container tightly closed in a cool, well-ventilated place. Keep/Store only in original container.

General protection and hygiene measures: refer to chapter 8

Take precautionary measures against static discharges. Flames and sources of ignition must be kept well away.

Vapours / aerosols must be extracted by suction immediately at point of origin.

Prolonged/repetitive skin contact may cause skin defattening or dermatitis. Hand protection: Tested protective gloves are to be worn: In case of prolonged or frequently repeated skin contact: Suitable material: Breakthrough time > 480 min. FKM (fluororubber). (VITOJECT® - Art. No. 890) - Thickness of glove material: 0,7 mm NBR (Nitrile rubber). (CAMATRIL VELOURS® - Art. No. 730) - Thickness of glove material: 0,4 mm On short hand contact: Suitable material: Breakthrough time > 60 min. NBR (Nitrile rubber). (DERMATRIL® P – Art. No. 743) - Thickness of glove material: 0,2 mm Manufacturer: Kächele-Cama Latex GmbH, Industriepark Röhn, Am Kreuzacker 9, D-36124 Eichenzell Telefon : +49-6659-87-300, Telefax : +49-6659-87-155, Internet : http://www.kcl.de , E-Mail : vertrieb@kcl.de The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it. When handling chemical substances, chemical protective gloves must be worn with CE label including a four digit code. In case of reutilization, clean gloves before taking off and store in well-aired place. Set out skin protection guidelines. Before starting work, apply solvent-cleaner-proof skin protection products.: sansibal®/ sansibon®, dualin® Wash hands before breaks and at the end of work.: ecosan®, topscrub® soft / topscrub® extra / topscrub® nature After cleaning apply high-fat content skin care cream.: physioderm® creme, cura soft® / cUrea soft® Manufacturer: Physioderm GmbH & Co. KG, Woellnerstrasse 26, D-67065 Ludwigshafen Telefon : +49-621-54967-0, Telefax : +49-621-54967-58, Internet : http://www.physioderm.de E-Mail : info@physioderm.de

Tightly sealed safety glasses. DIN EN 166

In case of insufficient ventilation, wear suitable respiratory equipment. Respiratory protection required in case of: exceeding critical value insufficient ventilation. Suitable respiratory protective equipment: Protective respiration apparatus not using surrounding air (breathing apparatus) (DIN EN 133). Only use breathing apparatus with CE-label including the four-digit identification number.

Protective clothing. (EN 340, EN 344)

Dumping into the environment must be prevented.

Stable under normal storage and handling conditions.

No information available.

Vapours may form explosive mixtures with air.

Ignition hazard. Keep away from heat.

Oxidizing agents.

Can be released in case of fire: Carbon monoxide. Carbon dioxide (CO2).