NextSDS Logo
Safety Data Sheet EN

P400 SC

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
P400 SC

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Alkaline cleaner/ detergent

Uses advised against

No further relevant information available.

Manufacturers & Suppliers

S

Stratasys, Inc.

manufacturer

7665 Commerce Way Eden Prairie, MN 55344 USA

+1 952 937 3000

C

C.S.B. GmbH

regional supplier

Düsseldorfer Straße 113 D-47809 Krefeld Germany

+49-2151-6520860

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Corr. Cat. 1A H314

GHS Pictograms

GHS05 - Corrosive

GHS05

Hazard Statements

H314 Causes severe skin burns and eye damage.

Precautionary Statements

P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P301+P330+P331 IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
P303+P361+P353 IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a POISON CENTER or doctor/physician.
P405 Store locked up.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type Mixtures

Mixture of the substances listed below with nonhazardous additions.

Chemical Name CAS Number Concentration Hazardous
Sodium carbonate EC: 207-838-8 497-19-8 50 - 100% Yes
SODIUM HYDROXIDE EC: 215-185-5 1310-73-2 10 - 25% Yes
sodium dodecyl sulphate EC: 205-788-1 151-21-3 2.5% Yes
Sodiumsilicate, pentahydrate 10213-79-3 2.5% Yes

For the wording of the listed risk phrases refer to section 16.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air. If required, provide artificial respiration. Keep patient warm. Consult doctor. In case of unconsciousness place patient stably in side position for transportation.

Skin contact

Immediately rinse with water. Immediate medical treatment necessary. Failure to treat burns can prevent wounds from healing.

Eye contact

Rinse opened eye for several minutes under running water. Call a doctor immediately. Protect unharmed eye. Remove contact lenses, if present and easy to do.

Ingestion

Drink copious amounts of water and provide fresh air. Immediately call a doctor. Do not induce vomiting - danger of perforation!

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Good ventilation is ensured; no further data on technical systems beyond what's in item 7.

Hands

Alkaline resistant gloves. Check the permeability prior to each renewed use of the glove. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves: Natural rubber, NR, PVC gloves. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.

Eyes

Tightly sealed goggles.

Respiratory

If all workplace limits are observed and good ventilation is ensured, no special precautions necessary.

Skin/Body

Alkaline resistant protective clothing

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Lower Explosive Limit
Not applicable
Softening Point
---
Solubility In Fat
---
Solubility In Water
soluble
State Under Standard Conditions
---
Crystallisation Point
---
Evaporation Rate
---
Kinematic Viscosity
Not applicable
Form
Granulate Beads
Solubility
---
Density
Not determined
Physical State
---
Cloud Point
---
Relative Evaporation Rate
---
Odor
odorless
Metal Corrosion
---
Appearance
---
Flash Point
Not applicable
Bulk Density
---
Ph
~ 13 (soln.)
Auto Ignition Temperature
Not applicable
Upper Explosive Limit
Not applicable
Relative Density
---
Properties Status
---
Colour Intensity
---
Boiling Point
Not applicable
Dynamic Viscosity
Not applicable
Melting Point
undetermined
Decomposition Temperature
Not determined
Flammability
Not applicable
Freezing Point
---
Physical State Data
solid
Voc Content
---
Odor Threshold
no data available
Vapor Density
---
Solidification Point
---
Partition Coefficient
---
Explosive Limits
---
Molecular Weight
---
Vapor Pressure
Not determined
Colour
White
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN1823
Shipping Name
SODIUM HYDROXIDE, SOLID, MIXTURE
Transport Class
8 Corrosive substances
Packing Group
II
ADR

Warning: Corrosive substances

IMDG

Warning: Corrosive substances

IATA

Warning: Corrosive substances

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for P400 SC?

The signal word is danger.

What is P400 SC used for?

Alkaline cleaner/ detergent

What are the hazard statements for P400 SC?

This substance has 1 hazard statement:

  • H314: Causes severe skin burns and eye damage.

What is the melting point of P400 SC?

The melting point is undetermined and the boiling point is Not applicable.

Compliance Scanner

Scan your compliance