Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ADDITIVE PXL CS-400
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Additive for motor oils, for professional and industrial use.
Manufacturers & Suppliers
PXL Chemicals BV
manufacturer
Stadionweg 43 D, 3077 AS Rotterdam
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Additive for motor oils.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Distillates (petroleum), solvent-refined heavy paraffinic EC: 265-090-8 | 64741-88-4 | 35 - 40% | No |
| Calcium sulphonate (Benzenesulphonic acid, C14-44-branched and linear alkyl derivs., calcium salts) EC: 294-233-7 | 91696-74-1 | 60 - 65% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove injured person to fresh air, loosen its clothing and place it in a comfortable position. If necessary, administer artificial respiration. In case of complaints, obtain medical help.
Remove contaminated clothing. Wash contaminated area thoroughly with running water and soap. In case of complaints, obtain medical help.
Flush eyes with water, holding the eyelids apart and moving eyeballs (for at least 15 minutes). Immediately call a POISON CENTER or doctor/physician.
Do not induce vomiting without previous medical advice. Place the victim into a comfortable position. Never give anything by mouth to an unconscious person, do not induce vomiting. In case of spontaneous vomiting, keep the head down the head of the injured person.
Immediate Medical Attention
Immediately call a POISON CENTER or doctor/physician.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water mist, foam, dry chemical, carbon dioxide.
Do not use a water jet because it may scatter and spread fire.
Inhalation of vapours formed during the fire and inhalation of combustion products can cause serious health problems.
Firefighter Protection
Use the proper full protective clothing and breathing apparatus (SCBA). Protective equipment must conform to HG 160/2007.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Keep unprotected people away, allow only well trained experts wearing suitable protective clothing to abide in the field of accident. Avoid contact with eyes, skin and clothing. Prevent unauthorised access.
The product discharged into the environment or the waste resulting from their use to be treated according to regulations on environmental protection.
Absorb spilled product with non-combustible absorbent and place the waste into a closed, properly labelled hazardous waste container till disposal.
Materials: non-combustible absorbent (e.g.: sand, earth)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Observe basic hygiene measures. Avoid contact with eyes, skin and clothing. Do not put soaked rags into the pocket of work clothes. Remove contaminated clothing. Keep away from food, drink and feed. Do not eat, drink or smoke when using the product. Wash hands before breaks and after work.
Keep in original, closed and properly labelled container. Store the product in metallic proper, upright containers placed in specially arranges locations and cover them to protect the product against decontamination with precipitation or dust.
Observe basic hygiene measures. Do not eat, drink or smoke when using the product. Wash hands before breaks and after work.
Follow preventive measures. Take precautions against static discharge.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation. Protective equipment must conform to HG 160/2007.
Use appropriate oil resistant protective gloves (made of PVC or nitrile rubber, EN 374 and EN 420). Replace protective gloves at the first sign of wear.
Use appropriate eye protection with side shields to prevent eye contact (EN 166).
normally not necessary. In case of formation of spray or vapours, or in case of frequent or intensive exposure, use an appropriate respiratory protection (EN 140, EN 141).
Protective clothing (antistatic) adequate to avoid contact of the product with the skin.
No specific instructions.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable within normal conditions of use and storage.
No data available.
Within normal conditions no hazardous reactions are expected.
Avoid high temperatures over 50 °C or sources of ignition. Avoid contact with water and moisture.
Explosive substances, compressed, liquefied or pressurized gases, flammable substances or strong oxidizing substances.
No decomposition within normal conditions of use.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity:
No ecotoxicological data available on the mixture; classified as not dangerous for the environment based on calculation method.
12.1. Toxicity:
12.1. Toxicity:
12.2. Persistence and degradability
12.2. Persistence and degradability:
12.2. Persistence and degradability:
The substance is not biodegradable.
12.3. Bioaccumulation potential:
No data available on the mixture itself.
12.3. Bioaccumulation potential:
It is expected that the product is bioaccumulable.
12.4. Mobility in soil:
12.5. Results of PBT and vPvB assessment
Product does not contain any components which meet the criteria for PBT or vPvB.
12.6. Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Disposal has to be performed according to the local/national regulations in force.
The waste product should be treated as hazardous waste and handed over to authorized collection points under the legislation in force.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Ensure that staff performing transportation of the product is informed of the necessary measures in case of accident or leakage.
Ensure that staff performing transportation of the product is informed of the necessary measures in case of accident or leakage.
Ensure that staff performing transportation of the product is informed of the necessary measures in case of accident or leakage.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ADDITIVE PXL CS-400?
The signal word is warning.
What is the physical form of ADDITIVE PXL CS-400?
ADDITIVE PXL CS-400 is a liquid appearing as liquid colour: brown to dark brown with brown to dark brown color. It has specific odor.
What is the solubility of ADDITIVE PXL CS-400?
≤ 1,91 x 10⁻⁵ g/l
What is ADDITIVE PXL CS-400 used for?
Additive for motor oils, for professional and industrial use.
What are the hazard statements for ADDITIVE PXL CS-400?
This substance has 1 hazard statement:
- H319: Causes serious eye irritation.
What is the melting point of ADDITIVE PXL CS-400?
The melting point is no data available and the boiling point is no data available.