Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
Interflon Fin Clean All is a liquid, blue substance commonly used industrial cleaner.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS05
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H290: May be corrosive to metals.
- H314: Causes severe skin burns and eye damage.
- H318: Causes serious eye damage.
Precautionary Statements
- P260: Do not breathe mist/vapours/spray.
- P280: Wear protective gloves/protective clothing/eye protection/face protection.
- P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
- P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P310: Immediately call a POISON CENTER/doctor.
- P390: Absorb spillage to prevent material damage.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
Interflon b.v.
manufacturer
P.O. Box 1070 NL-4700 BB Roosendaal The Netherlands
NL
+31(0)165.55.39.11
+31(0)165.53.80.82
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
UK National Poisons Emergency number
+44 870 600 6266
GB
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
mixtureGeneral Composition
Blend of organic and inorganic bases, surface-active substances and water.
Chemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2-(2-butoxyethoxy)ethanol EC: 203-961-6 | 112-34-5 | 2.5-10% | ⚠️ Hazardous |
| Alanine, N,N-bis(carboxymethyl)-, trisodium salt in water | 164462-16-2 | 2.5-10% | ⚠️ Hazardous |
| Alcohols, C9-11, ethoxylated | 68439-46-3 | 2.5-10% | ⚠️ Hazardous |
| Benzenesulfonic acid, C10-13-alkyl derivs., sodium salts EC: 270-115-0 | 68411-30-3 | 2.5-10% | ⚠️ Hazardous |
| Sodium p-cumenesulphonate EC: 239-854-6 | 15763-76-5 | 2.5% | ⚠️ Hazardous |
| potassium hydroxide EC: 215-181-3 | 1310-58-3 | 2.5% | ⚠️ Hazardous |
Additional Information
For the wording of the listed risk phrases refer to section 16.
Composition Notes
This product does not contain "very worrisome substances" (SVHC) that are very dangerous to human health or the environment. (SVHC <0.1% (w / w) Regulation (EC) No. 1907/2006 (REACH), Article 57).
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Supply fresh air and to be sure call for a doctor. In case of unconsciousness place patient stably in side position for transportation.
🖐️ Skin Contact
Immediately wash with water and soap and rinse thoroughly.
👁️ Eye Contact
Rinse opened eye for several minutes under running water. Then consult a doctor.
🍽️ Ingestion/Swallowing
Drink plenty of water and provide fresh air. Call for a doctor immediately.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🧤 Hand Protection
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Protective gloves. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Practical experience has shown that gloves of Nitril offer sufficient protection. Glove thickness: 0,13 mm. Breakthrough time: > 15 minutes. The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
👁️ Eye Protection
Tightly sealed goggles (EN166)
😷 Respiratory Protection
Not required.
🦺 Skin/Body Protection
Protective work clothing (EN340)
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
UN3267
📦 Proper Shipping Name
CORROSIVE LIQUID, BASIC, ORGANIC, N.O.S.
⚠️ Transport Hazard Class
8 Corrosive substances.
📋 Packing Group
III
🚛 ADR Transport Precautions
Warning: Corrosive substances.
🚢 IMDG Maritime Transport Precautions
Warning: Corrosive substances.
✈️ IATA Air Transport Precautions
Warning: Corrosive substances.
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for Interflon Fin Clean All?
The signal word for this substance is "danger".
What is the physical form of Interflon Fin Clean All?
Interflon Fin Clean All is a liquid appearing as liquid, blue with blue color. It has mild odor.
What is the solubility of Interflon Fin Clean All?
Fully miscible.
What is Interflon Fin Clean All used for?
Industrial cleaner
What are the hazard statements for Interflon Fin Clean All?
This substance has 3 hazard statements: H290: May be corrosive to metals. H314: Causes severe skin burns and eye damage. H318: Causes serious eye damage.
What is the melting point of Interflon Fin Clean All?
The melting point is -12 C and the boiling point is > 100 C.