Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Interflon Metal Clean (aerosol)
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Metal degreaser
Manufacturers & Suppliers
Interflon b.v.
manufacturer
P.O. Box 1070, NL-4700 BB Roosendaal, The Netherlands
http://www.interflon.com
Emergency Contacts
Interflon b.v.
+31(0)165.55.39.11
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of aliphatic- and oxidised hydrocarbons and propellant= CO2.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Naphtha (petroleum), hydrotreated light EC: 265-151-9 | 64742-49-0 | 25 - 50% | Yes |
| propan-2-ol EC: 200-661-7 | 67-63-0 | 2.5 - 10% | Yes |
For the wording of the listed risk phrases refer to section 16.
Notes
Interflon Metal Clean is listed by the NSF for use in the food industry (NSF K1 and K3) with registration number 140150.
First Aid Measures
Emergency procedures for chemical exposure incidents
In case of unconsciousness place patient stably in side position for transportation.
Immediately wash with water and soap and rinse thoroughly.
Rinse opened eye for several minutes under running water. Then consult a doctor.
Do not induce vomiting; call for medical help immediately.
Immediate Medical Attention
Call for medical help immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Firefighter Protection
No special measures required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away.
Do not allow to enter sewers/ surface or ground water.
Ensure adequate ventilation.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/exhaustion at the workplace.
Store in a cool and dry place. Observe official regulations on storing packagings with pressurized containers.
Keep ignition sources away - Do not smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
Protective gloves. Material of gloves: Neoprene gloves. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Penetration time of glove material: The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
Tightly sealed goggles
Use suitable respiratory protective device in case of insufficient ventilation.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No dangerous reactions known.
No dangerous reactions known.
sun-ray, temperatures above 50 °C, open fire, piercing can.
Strong acids, strong lye's and strong oxidising agents.
Thermal decomposition or combustion can release carbon monoxide and partly burned hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS, FLAMMABLE
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Labelling according to EU guidelines: The product has been classified and marked in accordance with EU Directives / Ordinance on Hazardous Materials. Code letter and hazard designation: Xi Irritant, F Highly flammable, N Dangerous for the environment. Risk phrases: 11, 38, 51/53, 67. Safety phrases: 3/7, 16, 23, 51. Special labelling: Pressurized container: protect from sunlight and do not expose to temperatures exceeding 50°C. Do not pierce or burn, even after use. Keep out of the reach of children.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Interflon Metal Clean (aerosol)?
The signal word is warning.
What is the physical form of Interflon Metal Clean (aerosol)?
Interflon Metal Clean (aerosol) is a aerosol with colourless color. It has characteristic odor.
What is Interflon Metal Clean (aerosol) used for?
Metal degreaser
What are the hazard statements for Interflon Metal Clean (aerosol)?
This substance has 2 hazard statements:
- H336: Has a narcotizing effect.
- Warning! Pressurized container.
What is the melting point of Interflon Metal Clean (aerosol)?
The melting point is Undetermined. and the boiling point is Not applicable, as aerosol..