NextSDS Logo
Safety Data Sheet EN

Interflon Degreaser EM56+

How compliant is your chemical safety?

Free 2-minute compliance assessment

Check Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Interflon Degreaser EM56+

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Degreaser

Manufacturers & Suppliers

Interflon b.v. logo

Interflon b.v.

manufacturer

P.O. Box 1070 NL-4700 BB Roosendaal The Netherlands

+31(0)165.55.39.11

www.interflon.com

Emergency Contacts

UK National Poisons Emergency number

+44 870 600 6266

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Asp. Tox. Cat. 1 H304
Eye Irrit. Cat. 2 H319

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H304 May be fatal if swallowed and enters airways.
H319 Causes serious eye irritation.

Precautionary Statements

P280 Wear protective gloves / eye protection.
P301+P310 IF SWALLOWED: Immediately call a POISON CENTER/ doctor.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P331 Do NOT induce vomiting.
P333+P313 If skin irritation or rash occurs: Get medical advice/attention.
P337+P313 If eye irritation persists: Get medical advice/attention.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Mixture of solvents and additives.

Chemical Name CAS Number Concentration Hazardous
Hydrocarbons, C11-C13, isoalkanes, <2% aromatics EC: 920-901-0 --- 25 - 50% Yes
Hydrocarbons, C11-C12, isoalkanes, <2% aromatics EC: 918-167-1 --- 25 - 50% Yes
Oleylamine ethoxylate EC: 500-048-7 26635-93-8 2.5% Yes

Note: Any entry in the EC column that begins with the number "9" is a Provisional List Number provided by ECHA pending publication of the official EC Inventory Number for the substance. See Section 16 for additional CAS number information for the substance. For the wording of the listed risk phrases refer to section 16.

Notes

This product does not contain "very worrisome substances" (SVHC) that are very dangerous to human health or the environment. (SVHC <0.1% (w / w) Regulation (EC) No. 1907/2006 (REACH), Article 57).

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air; consult doctor in case of complaints.

Eye contact

Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.

Ingestion

Do not induce vomiting; call for medical help immediately.

Symptoms: danger of entering the lungs.

Immediate Medical Attention

If swallowed or in case of vomiting, danger of entering the lungs.

Related Substances

Similar chemicals with comparable safety profiles

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Ventilation or extraction.

Hands

For prolonged or repeated skin contact use suitable protective gloves. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation Protective gloves The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Practical experience has shown that gloves of Nitril offer sufficient protection. Glove thickness: 0,13 mm Breakthrough time: > 15 minutes The penetration times are not determined by method EN 374 Part 3.

Eyes

Tightly sealed goggles (EN166)

Respiratory

Ventilation or extraction.

Skin/Body

Protective work clothing (EN340)

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Liquid, Colourless
Colour
Colourless
Colour Intensity
---
Form
Liquid
Odor
Petroleum-like
Odor Threshold
Not determined.
Ph
Not applicable.
Melting Point
< -114 C
Boiling Point
150 - 250 C
Flash Point
64 C
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
0.06
Vapor Pressure
0.5 hPa
Vapor Density
> 1 g/cm
Relative Density
Not determined.
Bulk Density
---
Density
0.76 g/cm
Flammability
Not applicable.
Upper Explosive Limit
7.0 Vol %
Lower Explosive Limit
0.6 Vol %
Explosive Limits
---
Auto Ignition Temperature
> 200 C
Decomposition Temperature
Not determined.
Solubility
Emulsifiable.
Partition Coefficient
---
Solubility In Water
Emulsifiable.
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
3.3 mPas
Kinematic Viscosity
1 mm/s
Properties Status
---
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Interflon Degreaser EM56+?

The signal word is danger.

What is the physical form of Interflon Degreaser EM56+?

Interflon Degreaser EM56+ is a liquid appearing as liquid, colourless with colourless color. It has petroleum-like odor.

What is the solubility of Interflon Degreaser EM56+?

Emulsifiable.

What is Interflon Degreaser EM56+ used for?

Degreaser

What are the hazard statements for Interflon Degreaser EM56+?

This substance has 2 hazard statements:

  • H304: May be fatal if swallowed and enters airways.
  • H319: Causes serious eye irritation.

What is the melting point of Interflon Degreaser EM56+?

The melting point is < -114 C and the boiling point is 150 - 250 C.

Compliance Scan

Free compliance check