Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Interflon Fin Grease
- Product Form
- aerosol
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant
Manufacturers & Suppliers
Interflon b.v.
manufacturer
P.O. Box 1070 NL-4700 BB Roosendaal The Netherlands
+31(0)165.55.39.11
www.interflon.com
Emergency Contacts
UK National Poisons Emergency number
+44 870 600 6266
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Blend of mineral oils, inorganic thickener, solvent, additives and Teflon. Propellant gas propane, butane and isobutane.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrocarbons, C7-C9, isoalkanes EC: 921-728-3 | --- | 10 - 25% | Yes |
| BUTANE/ISOBUTANE EC: 203-448-7 | 106-97-8 | 10 - 25% | Yes |
| PROPAN EC: 200-827-9 | 74-98-6 | 10 - 25% | Yes |
| EN ISOBUTAAN EC: 200-857-2 | 75-28-5 | 10 - 25% | Yes |
Note: Any entry in the EC column that begins with the number "9" is a Provisional List Number provided by ECHA pending publication of the official EC Inventory Number for the substance. See Section 16 for additional CAS number information for the substance. For the wording of the listed hazard phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
In case of unconsciousness place patient stably in side position for transportation.
Immediately wash with water and soap and rinse thoroughly.
Rinse opened eye for several minutes under running water. Then consult a doctor.
If symptoms persist consult doctor.
Immediate Medical Attention
No further relevant information available.
Medical Treatment
No further relevant information available.
Related Substances
Similar chemicals with comparable safety profiles
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation Protective gloves The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Practical experience has shown that gloves of Nitril offer sufficient protection. Glove thickness: 0,13 mm Breakthrough time: > 15 minutes The penetration times are not determined by method EN 374 Part 3.
Tightly sealed goggles (EN166)
Not required.
Protective work clothing (EN340)
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1950
- Shipping Name
- AEROSOLS
- Packing Group
- Void
Warning: Gases.
Warning: Gases.
Warning: Gases.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Interflon Fin Grease?
The signal word is danger.
What is the physical form of Interflon Fin Grease?
Interflon Fin Grease is a aerosol with white color. It has recognisable odor.
What is Interflon Fin Grease used for?
Lubricant
What are the hazard statements for Interflon Fin Grease?
This substance has 4 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
- H315: Causes skin irritation.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of Interflon Fin Grease?
The melting point is Not applicable. and the boiling point is < 0 C.