Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Interflon Metal Clean
- Product Form
- aerosol
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Metal degreaser.
Manufacturers & Suppliers
Interflon b.v.
manufacturer
P.O. Box 1070 NL-4700 BB Roosendaal The Netherlands
+31(0)165.55.39.11
www.interflon.com
Emergency Contacts
Emergency Contact
0870 600 6266
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of aliphatic- and oxidised hydrocarbons and propellant= CO2. Interflon Metal Clean is listed by the NSF for use in the food industry (NSF K1 and K3) with registration number 140150.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| nafta (aardolie), met waterstof behandeld licht bevat EC: 265-151-9 | 64742-49-0 | 25 - 50% | Yes |
| ISOPROPYL ALCOHOL EC: 200-661-7 | 67-63-0 | 2.5 - 10% | Yes |
| Koolstofdioxide E290 EC: 204-696-9 | 124-38-9 | 2.5 - 10% | Yes |
For the wording of the listed risk phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
In case of unconsciousness place patient stably in side position for transportation.
Immediately wash with water and soap and rinse thoroughly.
Rinse opened eye for several minutes under running water.
Do not induce vomiting; call for medical help immediately.
Related Substances
Similar chemicals with comparable safety profiles
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Protective gloves. Material of gloves: Neoprene gloves. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Penetration time of glove material: The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
Tightly sealed goggles
Use suitable respiratory protective device in case of insufficient ventilation.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Packing Group
- Void
Warning: Gases.
Warning: Gases.
Warning: Gases.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Interflon Metal Clean?
The signal word is na: r-phrases.
What is Interflon Metal Clean used for?
Metal degreaser.
What is the melting point of Interflon Metal Clean?
The melting point is Undetermined. and the boiling point is 110C.