Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Suma Auto Oven Clean D9.10
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- U1FJ-N125-200V-ET8G
Identified Uses
Oven/Grill cleaner. For professional use only.
Uses advised against
Uses other than those identified are not recommended.
Manufacturers & Suppliers
Diversey Europe Operations BV
manufacturer
Maarssenbroeksedijk 2, 3542DN Utrecht, The Netherlands
Tandur Hf.
distributor
Hesthälsi 12, 110 Reykjavík
5101200
Emergency Contacts
Poison Center
(+354) 543-2222
Emergency services
112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| potassium hydroxide EC: 215-181-3 | 1310-58-3 | 3 - 10% | Yes |
| sodium cumenesulphonate EC: 239-854-6 | 15763-76-5 | 1 - 3% | Yes |
Specific concentration limits for potassium hydroxide: Eye Dam. 1 (H318) >= 2% > Eye Irrit. 2 (H319) >= 0.5%; Skin Corr. 1A (H314) >= 5% > Skin Corr. 1B (H314) >= 2% > Skin Irrit. 2 (H315) >= 0.5%
Notes
Workplace exposure limit(s), if available, are listed in subsection 8.1. ATE, if available, are listed in section 11. For the full text of the H and EUH phrases mentioned in this Section, see Section 16..
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing. Get medical attention or advice if you feel unwell.
Symptoms: No known effects or symptoms in normal use.
Wash skin with plenty of lukewarm, gently flowing water for at least 30 minutes. Wash skin with plenty of lukewarm, gently flowing water. Take off immediately all contaminated clothing and wash it before reuse. Immediately call a POISON CENTRE, doctor or physician. If skin irritation occurs: Get medical advice or attention.
Symptoms: Causes severe burns.
Hold eyelids apart and flush eyes with plenty of lukewarm water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTRE, doctor or physician.
Symptoms: Causes severe or permanent damage.
Rinse mouth. Immediately drink 1 glass of water. Never give anything by mouth to an unconscious person. Do NOT induce vomiting. Keep at rest. Immediately call a POISON CENTRE, doctor or physician.
Symptoms: Ingestion will lead to a strong caustic effect on mouth and throat and to the danger of perforation of oesophagus and stomach.
Immediate Medical Attention
Immediately call a POISON CENTRE, doctor or physician.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide. Dry powder. Water spray jet. Fight larger fires with water spray jet or alcohol-resistant foam.
No special hazards known.
Firefighter Protection
As in any fire, wear self contained breathing apparatus and suitable protective clothing including gloves and eye/face protection.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Dyke to collect large liquid spills.
Dilute with plenty of water. Do not allow to enter drainage system, surface or ground water.
Do not place spilled materials back into the original container. Collect in closed and suitable containers for disposal.
Materials: sand, diatomite, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feeding stuffs. Do not mix with other products unless advised by Diversey. Wash face, hands and any exposed skin thoroughly after handling. Take off immediately all contaminated clothing. Wash contaminated clothing before reuse. Avoid contact with skin and eyes. Do not breathe spray. Use only with adequate ventilation.
Store in accordance with local and national regulations. Store in a closed container. Keep only in original packaging.
Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feeding stuffs. Wash face, hands and any exposed skin thoroughly after handling. Take off immediately all contaminated clothing. Wash contaminated clothing before reuse.
No special precautions required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide a good standard of general ventilation. Where possible: use in automated/closed system and cover open containers. Transport over pipes. Filling with automatic systems. Use tools for manual handling of product.
Chemical-resistant protective gloves (EN 374). Verify instructions regarding permeability and breakthrough time, as provided by the gloves supplier. Consider specific local use conditions, such as risk of splashes, cuts, contact time and temperature. Suggested gloves for prolonged contact: Material: butyl rubber Penetration time: ≥ 480 min Material thickness: ≥ 0.7 mm. Suggested gloves for protection against splashes: Material: nitrile rubber Penetration time: ≥ 30 min Material thickness: ≥ 0.4 mm. In consultation with the supplier of protective gloves a different type providing similar protection may be chosen.
Safety glasses or goggles (EN 166). The use of a full-face shield or other full-face protection is strongly recommended when handling open containers or if splashes may occur.
Apply technical measures to comply with the occupational exposure limits, if available. If exposure to liquid particles or splashes cannot be avoided use: half mask (EN 140) with particle filter P2 (EN 143) or full-face mask (EN 136) with particle filter P1 (EN 143) Consider specific local use conditions. In consultation with the supplier of respiratory protection equipment a different type providing similar protection may be chosen.
Wear chemical-resistant clothing and boots in case direct dermal exposure and/or splashes may occur (EN 14605).
Should not reach sewage water or drainage ditch undiluted or unneutralised.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal storage and use conditions.
No reactivity hazards known under normal storage and use conditions.
No hazardous reactions known under normal storage and use conditions.
None known under normal storage and use conditions.
May be corrosive to metals. Reacts with acids.
None known under normal storage and use conditions.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The concentrated contents or contaminated packaging should be disposed of by a certified handler or according to the site permit.
The concentrated contents or contaminated packaging should be disposed of by a certified handler or according to the site permit.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1814
- Shipping Name
- Potassium hydroxide solution
- Transport Class
- 8
- Packing Group
- II
None known.
None known.
None known.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Safety, health and environmental regulations/legislation specific for the substance or mixture
The surfactant(s) contained in this preparation complies(comply) with the biodegradability criteria as laid down in Regulation (EC) No. 648/2004 on detergents. Data to support this assertion are held at the disposal of the competent authorities of the Member States and will be made available to them, at their direct request or at the request of a detergent manufacturer.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Suma Auto Oven Clean D9.10?
The signal word is danger.
What is the physical form of Suma Auto Oven Clean D9.10?
Suma Auto Oven Clean D9.10 is a liquid with clear, amber color. It has product specific odor.
What is the solubility of Suma Auto Oven Clean D9.10?
Fully miscible
What is Suma Auto Oven Clean D9.10 used for?
Oven/Grill cleaner. For professional use only.
What are the hazard statements for Suma Auto Oven Clean D9.10?
This substance has 2 hazard statements:
- H290: May be corrosive to metals.
- H314: Causes severe skin burns and eye damage.
What is the melting point of Suma Auto Oven Clean D9.10?
The melting point is Not determined and the boiling point is Not determined.