Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Advantra® LT 9135
- Product Code
- Advantra® LT 9135
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Hot melt adhesive
Uses advised against
For industrial use only.
Manufacturers & Suppliers
H.B. Fuller UK Ltd.
manufacturer
Globe Lane Industrial Estate, Outram Road, Dukinfield, SK16 4XE, Cheshire, UK
Emergency Contacts
GBK-EMTEL International
+49(0)6132/84463
24h
Infotrac
(001) 352 323 3500
24h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air. If signs/symptoms continue, get medical attention.
Cool skin rapidly with cold water after contact with molten material. Do not peel solidified product off the skin. Obtain medical attention.
Flush eyes with water at least 15 minutes. Get medical attention if eye irritation develops or persists.
Do NOT induce vomiting. If accidentally swallowed obtain immediate medical attention. If symptoms persist, call a physician.
Immediate Medical Attention
If accidentally swallowed obtain immediate medical attention.
Medical Treatment
Use mineral oil to soften and loosen product for removal.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Water mist, Foam, Dry powder, Carbon dioxide (CO2)
No further relevant information available.
Firefighter Protection
No special technical protective measures required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Try to prevent the material from entering drains or water courses.
Allow to solidify, use mechanical handling equipment.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid breathing vapors/fumes of heated product. Prevent contact with molten product. Wear personal protective equipment.
Protect against light. Keep in a dry, cool place.
not required
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Material: Protective gloves. Remarks: When handling hot material, use heat resistant gloves. The exact break through time can be obtained from the protective glove producer and this has to be observed.
Safety glasses
No personal respiratory protective equipment normally required.
Protective clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to the specifications.
No further relevant information available.
None known.
No further relevant information available.
No further relevant information available.
No hazardous decomposition products are known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
The substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
12.6 Other adverse effects
The substance/mixture does not contain components considered to have endocrine disrupting properties for environment according to UK REACH Article 57(f).
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Incinerate under controlled conditions in accordance with all local and national laws and regulations.
Do not dispose of with domestic refuse. Do not dispose of waste into sewer. The generation of waste should be avoided or minimized wherever possible. Incinerate under controlled conditions in accordance with all local and national laws and regulations. Disposal must be made according to official regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Advantra® LT 9135?
The signal word is no signal word.
What is the physical form of Advantra® LT 9135?
Advantra® LT 9135 is a pellets appearing as pellets with beige color. It has neutral odor.
What is the solubility of Advantra® LT 9135?
insoluble
What is Advantra® LT 9135 used for?
Hot melt adhesive
What is the melting point of Advantra® LT 9135?
The melting point is is not determined and the boiling point is is not determined.